Search results for 'long tube header'
-
2JR Donut Gasket
Regular Price: $24.80
Special Price $22.45
2JR Donut Gasket We offer different sizes of the donut gasket for the following parts B15 Spyder Header B15 Medusa Header E210 Header E210 Midpipe GR Corolla Midpipe Sold as EACH Learn More -
2019+ Tein Street Basis Z - Corolla Hatchback and Sedan
Regular Price: $640.00
Special Price $608.78
2019+ Tein Street Basis Z - Corolla Hatchback and Sedan Fitment Information Lowering Range: 1.0" to 3.0" Front and 1.0" to 3.0" Rear Street use superior quality made affordable. Thread-type Ride Height Adjustment. The ride height can be adjusted by moving the lower spring seat up or down. Twin-Tube System. Compared to the regular mono-tube system, twin-tube attains longer stroke with a smaller repulsive force, resulting in high ride comfort. Use OE Mounts. STREET ADVANCE Z and STREET BASIS Z use the vehicle's original upper mounts (not included in our product kit). Specs & Features Spring Rates: 280 lb Front and 263 lb Rear Fixed Damper Settings (non adjustable) Includes a full set of 4 12 Month Warranty Genuine TEIN - Made in Japan Learn More -
Turbo Oil Drain Kit - QR25 (Gen 1)
Regular Price: $149.99
Special Price $139.45
Turbo Oil Drain Kit - QR25 (Gen 1) Only recommend for small turbo - i.e. T28 series. Uses the OEM dipstick port in the upper oil pan. Includes billet adapter, 10AN fitting for your drain line, compression fitting, OEM oring and dip stick. For install - please watch our 2JR Turbo Kit video on Youtube. You will need to cut your OEM dipstick tube to the correct length and adjust to fit the attachment point on the water pump housing (tab). Then cut the dipstick we provide right below the plastic - and use as the cap at the top of the dipstick tube. You cannot have a dipstick rod in the tube with this kit - it will prevent the turbo from draining. Learn More -
PREORDER B15 QR Stainless Flex Resonated Midpipe 2.5"
Regular Price: $299.98
Special Price $239.78
Limited Run of Resonated Midpipes for the QR B15 Chassis with a flex section are now available in 2.5". Made from 304 Stainless Steel and mandrel bent to ensure the highest flow then paired with a stainless flex section and resonator to reduce rasp and noise. Will fit on the OEM and aftermarket exhausts as well as 2JR and aftermarket 4-1 headers. Includes rear gasket, bolts and nuts. You can add an optional OEM donut gasket or reuse your existing one. Made by 2JR and hand welded to perfection. We use only the best exhaust components for a complete full stainless system. Stainless perforated core for extra long life. The resonator can be subbed out for a cat in the options. This will add about 1 week production time. Sounds absolutely AMAZING -
Juke "Sprint Series" Front Mount Intercooler Kit
Regular Price: $949.99
Special Price $729.98
Juke "Sprint Series" Front Mount Intercooler Kit 2JR Sprint Series FMICs are designed to be used on the street or track with no limitations in performance and to be a complete drop in kit. Can be used with Stock OEM Nissan Intercooler piping or Injen to 2JR hardpiping kit. Features and Benefits: - Direct fit for the 2011-2015 Nissan Jukes (CVT, 6MT, FWD and AWD) - all RS models all years - 27" Long intercooler design optimized for maximum flow - No modification to front bumper and retains stock fog lights - Maximum cooling efficiency with minimal pressure drop - Max power gains of 19HP and 22 feet per pounds of torque - Drops intercooler outlet temperatures by 38°F - Increases core size by 138% and fin surface area by 42% All the hardware required to complete your installation is likewise included. Learn More -
B17 Sentra Turbo "Sprint Series" Front Mount Intercooler Kit
Regular Price: $899.00
Special Price $679.98
B17 Sentra Turbo "Sprint Series" Front Mount Intercooler Kit 2JR Sprint Series FMICs are designed to be used on the street or track with no limitations in performance and to be a complete drop in kit. Kit includes all the hard piping! From the turbo to the throttle body. Complete kit! NOTE: Send us a message on FB or IG for the Install Video! Features and Benefits: - Direct fit for the 2017-2020 Nissan Sentra B17 Turbo(SR and Nismo models) - 27" Long intercooler design optimized for maximum flow - No modification to front bumper and retains stock fog lights - Maximum cooling efficiency with minimal pressure drop - Max power gains of 19HP and 22 feet per pounds of torque - Drops intercooler outlet temperatures by 38°F - Increases core size by 138% and fin surface area by 42% All the hardware required to complete your installation is likewise included. Learn More -
Clutch Masters Nissan SR Sentra Turbo FX400 Sprung 6-Puck Ceramic Clutch Kit
Regular Price: $603.75
Special Price $523.75
Clutch Masters Nissan SR Sentra Turbo 6-Spd 1.6T FX400 HD PP Sprung 6-Puck Ceramic Clutch Kit FX400 Clutch Kit; Heavy Duty Pressure Plate; 6-Puck Ceramic Sprung Disc; Change Over Kit w/o Flywheel; Will Only Work w/ CM Flywheel Ceramic System, 170% over stock holding capacity Ultra Heavy Duty Street and/or Racing. The FX400 System uses the Power Plus I Pressure Plate with a Ceramic disc. This s the ultimate, extreme-duty street, or road/drag racing system. It is built using a special 4-wing Ceramic Button design disc for long life, outstanding holding capacity and high heat dissipation. SFI Approved for most race applications. *Warning:* The Ceramic disc engages very quickly and may chatter slightly upon starting from a stop. *Features* * Ultra heavy-duty street &racing system * Holding capacity 170% over stock * Heavy-Duty reinforced pressure plate * Hi-Leverage pressure ring design * Sprung hub/4-button * Ceramic friction material * SFI Approved on most race applications. *Includes* * Pressure Plate * Clutch Disc * Throw-out Bearing (when applicable) * Pilot Bearing or Bushing (when applicable) * Alignment Tool Learn More -
Cobb Tuning - Fiesta ST Stage I Package (2014-2019)
Regular Price: $760.00
Special Price $759.98
Accessport / RMM / Intake Filter The Accessport V3 is the world's best selling, most flexible ECU upgrade solution for Ford. Unlock power hidden within the vehicle by replacing conservative factory settings with more aggressive calibrations. Upgrade forever with off-the-shelf (OTS) calibrations for most bolt-on modifications. It's the last engine management solution you'll ever need. COBB High Flow Filters are designed to permit very high flow rates, minimize restriction, maximize filtration and provide a long life filter. Using propriety Woven cotton and metal mesh with a precision molded rubber base, the COBB High Flow Filter ensures that only clean air passes into your engine for maximum efficiency. Why not treat your car to fresh air with a COBB High Flow Filter and let it reward you with increased power, fuel economy and money savings! The COBB Ford Fiesta ST Rear Motor Mount is the best way to minimize engine movement, improve traction, and reduce wheel hop without major impact to NVH. Learn More -
Clutch Masters Nissan Juke FX400 Sprung 6-Puck Ceramic Clutch Kit
Regular Price: $603.75
Special Price $523.78
Clutch Masters Nissan Juke 6-Spd 1.6T FX400 HD PP Sprung 6-Puck Ceramic Clutch Kit FX400 Clutch Kit; Heavy Duty Pressure Plate; 6-Puck Ceramic Sprung Disc; Change Over Kit w/o Flywheel; Will Only Work w/ CM Flywheel Ceramic System, 170% over stock holding capacity Ultra Heavy Duty Street and/or Racing. The FX400 System uses the Power Plus I Pressure Plate with a Ceramic disc. This s the ultimate, extreme-duty street, or road/drag racing system. It is built using a special 4-wing Ceramic Button design disc for long life, outstanding holding capacity and high heat dissipation. SFI Approved for most race applications. *Warning:* The Ceramic disc engages very quickly and may chatter slightly upon starting from a stop. *Features* * Ultra heavy-duty street &racing system * Holding capacity 170% over stock * Heavy-Duty reinforced pressure plate * Hi-Leverage pressure ring design * Sprung hub/4-button * Ceramic friction material * SFI Approved on most race applications. *Includes* * Pressure Plate * Clutch Disc * Throw-out Bearing (when applicable) * Pilot Bearing or Bushing (when applicable) * Alignment Tool Learn More -
QR25DE Hitachi OEM Coil Pack Set (4) 02-06
Regular Price: $198.00
Special Price $184.99
QR25DE Hitachi OEM Coil Pack Set (4) 02-06
Complete set (4 included) of OEM Hitachi Coil Packs for your Gen 1 QR - fits all models Sentra/Altima/Frontier with the Gen1 QR engine (02-06)
12 Month / 12k Mile Warranty fr.
- Hitachi ENSURE FAST STARTS: this Hitachi Ignition Coil ensures fast starts, consistent engine performance, and optimized fuel efficiency. The coil is OE-engineered for a streamlined path to the spark plug and reduced shorts, and it eliminates the need for spark plug wires. High-quality wire coating ensure resilient, long-lasting functionality and minimal current fluctuation
- ENSURE EFFECTIVE COMBUSTION: the Hitachi Ignition Coil delivers optimal combustion and consistent, high-energy ignition output. These Hitachi Ignition Coils, also known as engine coils or spark plug coils, deliver the highest in durability and operational performance. Designed for exacting fitment and connectivity, you can install the Hitachi Ignition Coils with OE-confidence
- RELY ON PROVEN DURABILITY: Hitachi coil designs are developed in their test lab and proven tough at extreme conditions that are far beyond any operational environment that a vehicle would experience. Gold-plated connectors prevent corrosion
-
K&N 09-10+Nissan/Infiniti 370z/G37 V6-3.7L Typhoon Intake
Regular Price: $649.99
Special Price $629.99
The K&N 69-7078TS Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Nissan 370Z and Infiniti G37 models. The restrictive factory air filters and air intake housings are replaced by the K&N Typhoon air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intakes. More air means more usable power and acceleration throughout the engine's RPM range. The 69-7078TS air intake comes with dual black rubber topped K&N high-flow air filters and heat shields that install into the previous air box spaces. Air is directed through the intake tubes into the engine's throttle bodies for a guaranteed power gain. The intake tubes have an attractive silver powder-coated finish that's made to last and accommodate the factory mass air sensors and crank case vent hoses. The oversized cone shaped air filters can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake system is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a couple of screwdrivers, pliers, a ratchet set and several wrenches. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. Learn More -
aFe Twisted Steel Headers 03-06 Nissan 350Z /Infiniti G35 V6-3.5L
Regular Price: $1,064.98
Special Price $989.98
Features: •Constructed of 1-5/8in. 16-gauge 304 stainless steel primary tubing •Mandrel-bent for unrestricted flow •3-to-1 formed collectors decrease turbulence and increases exhaust velocity •Optimized Tube Lengths Improve Flow and Performance •100% hand TIG-welded construction ensures optimal stre ngth and durability Test Results •In testing; the headers produced a max gain of+9 horsepower and+12 ft. lbs. of torque verified by our in house dyno (tested on 2003 Nissan 350Z V6-3.5L with stock y-pipe) •Potential for up to+10 horsepower and+13 lbs. x ft. of torque when combined with aFe s per formance Y-Pipe (P/N 48-36104-YC) Factory Mounting Locations: These headers are a direct bolt-on installation which requires no cutting or drilling to provide a hassle-free installation. Formed Collectors: 3-to-1 formed collectors decrease turbulence and increases exhaust velocity. The result is in creased horsepower; torque and improved throttle response. Heavy Duty Flanges: 1-5/8in. Thick 1-piece flanges are used to prevent warpage to ensure a leak-free seal over the life of the vehicle. Optimized Tube Lengths: Tube lengths are optimized for true pulse control technology which improves flow and performance. aFe headers and exhaust are engineered and manufactured in our Corona; California manufacturing facility. Note: This system is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle. Learn More -
MagnaFlow Conv Univ 2.25inch
Regular Price: $209.00
Special Price $189.99
MagnaFlow specializes in superior catalytic converter and exhaust technology and has spent the past 30+ years earning its reputation as a global market leader. American engineered and manufactured, MagnaFlow Catalytic Converters combine efficient industrial design to produce a product that exceeds, rather than meets, the highest standards of product performance and efficiency in the industry. MagnaFlow uses both Ceramic and Metallic substrates with different combinations of cell density and wall thickness to meet vehicle specific requirements. MagnaFlow Universal Catalytic Converters form the basic building blocks for a comprehensive line of direct-fit applications. The main benefit of the universal catalytic converter is that one unit may cover a wide variety of vehicle makes and models. Installing universal converters often requires the use of welding, cutting and tube bending equipment that is readily available to most professional installers. Learn More -
MagnaFlow Conv Univ 2.25in Inlet/Outlet Center/Center Round 9in Body L x 5.125in W x 13in Overall L
Regular Price: $228.00
Special Price $219.99
MagnaFlow specializes in superior catalytic converter and exhaust technology and has spent the past 30+ years earning its reputation as a global market leader. American engineered and manufactured, MagnaFlow Catalytic Converters combine efficient industrial design to produce a product that exceeds, rather than meets, the highest standards of product performance and efficiency in the industry. MagnaFlow uses both Ceramic and Metallic substrates with different combinations of cell density and wall thickness to meet vehicle specific requirements. MagnaFlow Universal Catalytic Converters form the basic building blocks for a comprehensive line of direct-fit applications. The main benefit of the universal catalytic converter is that one unit may cover a wide variety of vehicle makes and models. Installing universal converters often requires the use of welding, cutting and tube bending equipment that is readily available to most professional installers. Learn More -
Weapon R 03-06 Nissan 350Z (Revised 3.5in Performance Pipe) Dragon Intake
Regular Price: $272.61
Special Price $218.99
Weapon*R Dragon Intake Systems are one of the mostly highly rated intake systems in the world. Used in many countries in many different forms of racing. Also recently rated "Best Overall Performer", outperforming Cold Air & Short Ram Intake systems, in the 2003 Tuner Performance Reports, Intake system Battle. Our Intake Systems are CNC Mandrel Bent out of 6061 aluminum, and then Hand Tig Welded to ensure a positive seal and proper fitment. Each one of our intake systems is carefully tuned, by matching the engines displacement, air intake capacity and airspeed to the intake systems tube size and length, maximizing every engines performance output. This Intake is matched with our World Famous Dragon Filter, which provides maximum airflow, with the protection of high quality dense Poly Urethane Foam. Many studies have shown Flow rates of up to 80% more Air and Better Dirt Filtration with Foam Filter than the conventional cotton filter. The Dragon Filter features a Computer CAD Designed and Flow benched Tested Velocity Stack, which greatly increases airflow and air volume into the engine, therefore increasing engine performance. Another one of the Dragon Filters positive features are the capability to be disassembled to be cleaned and then re-assembled after cleanings or to change the color of the foam filtering element. Learn More -
Turbosmart BOV Kompact Shortie Plumb Back - Ford Focus RS 2.3L
Regular Price: $179.99
Special Price $149.99
Like all Turbosmart blow off valves, the new Kompact Shorties have been machined in-house, from solid billet aluminium. Keeping the process in-house, ensures only the best quality, and none of the cracking or leaking that plague the factory plastic valves. Like their predecessors, they’ve been engineered with a light-weight, brass/aluminium, two-piece piston. Carefully engineered springs make these the most responsive valves of their kind. The Kompact Shortie fits a huge range of turbos, and their tiny dimensions make them a breeze to fit. To make things even easier, Shorties are supplied with both a swivel “banjo” nipple and a straight nipple, meaning you can tailor the valve to better suit your application. Larger o-rings have been fitted in the base to aid ease of installation – another modification made after talking to our authorized dealers and installers. Small design means Shortie is easy to install. All billet construction, and well-designed internals mean it will hold as much boost as you want to throw at it, for as long as you need it to. The Plumb Back version is as quiet as a factory valve, or if you’re looking to make a little noise, the Dual Port version’s superior flow characteristics will safely provide that BOV sound you’re looking for. The new twin fixed ports flow more than ever before. You just can’t lose with Turbosmart’s Shortie. Learn More -
Turbosmart BOV Kompact Dual Port - Ford Focus RS 2.3L
Regular Price: $206.99
Special Price $199.99
Like all Turbosmart blow off valves, the new Kompact Shorties have been machined in-house, from solid billet aluminium. Keeping the process in-house, ensures only the best quality, and none of the cracking or leaking that plague the factory plastic valves. Like their predecessors, they’ve been engineered with a light-weight, brass/aluminium, two-piece piston. Carefully engineered springs make these the most responsive valves of their kind. The Kompact Shortie fits a huge range of turbos, and their tiny dimensions make them a breeze to fit. To make things even easier, Shorties are supplied with both a swivel “banjo” nipple and a straight nipple, meaning you can tailor the valve to better suit your application. Larger o-rings have been fitted in the base to aid ease of installation – another modification made after talking to our authorized dealers and installers. Small design means Shortie is easy to install. All billet construction, and well-designed internals mean it will hold as much boost as you want to throw at it, for as long as you need it to. The Plumb Back version is as quiet as a factory valve, or if you’re looking to make a little noise, the Dual Port version’s superior flow characteristics will safely provide that BOV sound you’re looking for. The new twin fixed ports flow more than ever before. You just can’t lose with Turbosmart’s Shortie. Learn More -
aFe Takeda 3in 304 SS Cat-Back Exhaust w/ Polished Tip Ford Focus RS 2.3L (t)
Regular Price: $1,074.99
Special Price $999.99
Power, sound and good looks is what this Takeda cat-back exhaust delivers. Power gains of up to +11 horsepower and +15 lbs. x ft. torque as shown on our in-house dyno. 3"- 2-1/2" mandrel bent 304 stainless steel tubing and high flow transverse muffler offers maximum exhaust flow and incorporates a factory style exhaust valve to control the exhaust note. The valve utilizes the factory valve motor and factory performance modes. When closed, it directs the exhaust through the high flow muffler for a smooth, tuned exhaust note. When opened, the exhaust is allowed to bypass the muffler and unleash the sound and performance of your RS. The high flow, stainless steel muffler is finished in high temp, metallic black powder coating for long lasting good looks. Dual 4 1/2" stainless steel exhaust tips with laser etched Takeda brand logo for a custom finish. Learn More -
aFe Takeda Stage-2 P5R AIS Ford Focus RS L4-2.3L EcoBoost
Regular Price: $452.99
Special Price $399.00
Large 3-Layer Performance Air Filter: This intake system utilizes an oil-free, large 6" tall conical 360 degree radial flow performance air filter with 3-Layer progressively finer porosity synthetic media for maximum convenience. One-Piece Heat Shield: Sturdy 18 Gauge Powder-Coated One-Piece Heat Shield blocks performance-robbing engine heat. This heat shield requires no assembly and uses factory mounting locations for fast and easy installation. Mandrel-Bent Tubing: Two Piece 3" Mandrel-Bent Powder-Coated Aluminum Intake Tube directs unrestricted airflow from the massive filter to the turbo for more horsepower and torque. Premium Hardware: Premium hardware and clamp are used to securely mount the high flow air filter and the intake tube. Learn More -
K&N Typhoon Performance Intake Kit (2011-2014) Juke
Regular Price: $399.98
Special Price $378.98
K&N Typhoon Performance Intake Kit (2011-2014) Juke Fits all turbo (MR16DDT) Juke Models 2011-2014 Fits all RS Models, all years The K&N 69-7079TS Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Nissan Juke models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-7079TS air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive silver powder-coat finish that's made to last and it accommodates the factory mass air sensor and fresh air intake tube. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a couple of screwdrivers, pliers, a ratchet set and an Allen wrench. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. Learn More