Search results for '00 nissan sentra se'
-
Injector Dynamics ID1050X Injectors 14mm (Grey) Adaptor Top (Set of 4)
Regular Price: $546.00
Special Price $529.78
Injector Dynamics ID1050X Injectors 14mm (Grey) Adaptor Top (Set of 4) Direct fit on your 2002 and up Nissan The ID1050x is the evolution of the ID1000, and the latest addition to the X-Series. It is the most recent offering from the partnership of Injector Dynamics and Bosch Motorsport, and is the result of lessons learned during development of the ID1300x, and ID1700x. Like the ID1300x and ID1700x, the ID1050x is not a modified production component. It is a built to spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner. Compared to the original ID1000, the ID1050x offers numerous improvements, and is sure to become the new reference. Learn More -
B15 Garrett 60 Trim Turbo Kit (02-06) 450hp
Regular Price: $5,699.00
Special Price $3,998.97
Garrett 60 Trim Turbo Kit (02-06) Fits: 02-06 Sentra 2.5L (SE-R and SpecV) Gains: Up to 450whp Kit Includes: Garrett 60 Trim Stage 3 Journal Bearing Turbo Turbosmart WG38 Gen V Ultragate 38 7psi Blue Turbosmart BOV Vee Port Pro - Blue Bosch 850cc Injectors Stainless Downpipe Vibrant Hardware/Lines Treadstone TR8 Intercooler Turbosmart Boost Gauge Wastegate spring set to 7psi for 290whp out of the box. Higher rate springs can be spec'd for up to 450hp. Contact us after purchase. NOTES: You will need to move both fans to the front of the condensor/rad - slim fans required. Kit will fit larger radiators like Mishi without any mod. Standard kit comes with an open dump for the WG. Options include powdercoated piping / closed dump / larger injectors. You may need to relocate/remove foglights. Kit will need to be tuned after install. Contact your local tuner or 2J Learn More -
B15 2.5L Hi-Power 3" Cold Air Intake (CAI)
Regular Price: $299.99
Special Price $149.00
This is the highest HP producing intake we've ever tested. Over 8 hp more than a Nismo Cold Air intake!!. Makes Over 15 than the stock box. Refer to the dyno for Nismo vs 2JR. Can be used for supercharged or turbo applications if the customer chooses. Has a full 3" MAF section with the appropriate MAF spacing in the piping to prevent any unwanted air disturbance which would cause MAF spikes. Nissan MAFs are require a specific amount of straight pipe before and after the MAF for optimum performance. Power, design and function. And for less than any other cold air intake on the market. This is the highest HP producing intake for the Spec-V. It also sounds incredible at wide open throttle! Intake includes 1. 1 piece seamless high polished piping with integrated MAF housing / power section 2. 1 dry hi-flow filter 3. 1 coupler assy with band clamps 4. 1 VC to CAI hose 5. 1 round bushing for securing the intake (w hardware) Learn More -
Injen 2011-2014 Nissan Juke Short Ram Cold Air Intake (Red/Black/Polished)
Regular Price: $301.98
Special Price $259.78
Injen 2011-2014 Nissan Juke Short Ram Cold Air Intake (Red/Black/Polished) Direct fit for: 2011-2014 Nissan Juke L4-1.6L Turbo All Years for Nismo RS Models (2011-2017) The Injen SP Series Intake Systems Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. The Injen SP Series Intake System does not limit itself to just a Cold Air System or Short Ram System. The MR Technology process has its effects on both types. The Injen SP Series Intake is The World's First Tuned Intake System Available in Red, Black or Polished Learn More -
QR25 Upper Oil Pan - Turbo Drain
Regular Price: $299.99
Special Price $279.89
QR25 Upper Oil Pan - Turbo Drain We now offer a new OEM upper oil pan for the QR25 with a drilled, tapped and tig welded 10an oil drain, Inc a block off cap if you're not turbo yet. No more leaks. Approx 1-2 weeks from date order is placed. Subject to parts availability from Nissan. Pan's do not include baffle plate. They are as shown in the photo. You can also send in your pan for this service. The cost is $135 and includes the fittings. Shipping costs paid when you check out will be used to return your pan. Ship to the address below with your order receipt in the box. OEM B15 Pan: Nissan 11110-3Z000 (2002-2006) OEM B16 Pan: Nissan 11110-ET80A (2007-2012) < new OEM pan is +300 from Nissan Ship to: 2JRacing 1685 Redi Rd Cumming GA 30040 Learn More -
Hard Race Exhaust Hangers (Set of 4)
Regular Price: $29.87
Special Price $22.99
Hard Race Exhaust Hangers (Set of 4) Fits Nissan / Toyota / Subaru / Ford Dimensions: Length: 2-7/8, Width: 1-7/8, Height: 13/16. 12mm Holes * use Brake Cleaner to aid in installation (acts as a quick drying lubricant) High Durometer EPDM material with better abrasion resistance, high-temperature resistance and strength 1. Strong Lateral (side load) control 2. Reduce the height and contact surface b/w exhaust and chassis 3. Dampens vibrational interference b/w the hanger and exhaust Learn More -
Nissan Juke Oil Feed Line - Turbo
Regular Price: $89.95
Special Price $68.39
Juke Oil Feed Line - (2011-2014) and all RS models (any year) Replacement Oil Feed Line for your Gen 1 Nissan Juke. Its very common for this line to become clogged over time and damage the turbo. Don't take a chance and replace it with a new line, hardware and copper seals. Install time is approx 30m and best performed during an oil change. It is also recommended to add a catch can to capture and filter the oil blow by before it enters back into your engine. Learn More -
2JR UpRev Turbo/Boosted ROM Files (Non-Juke)
Regular Price: $399.98
Special Price $349.98
2JR UpRev Turbo/Boosted ROM Files (not Nissan Juke) If you already have a USB Interface cable and license, and wish to have us tune your vehicle, this is the first step. After you place the order for the E-Tune, you'll need to email info@2j-racing.com and provide your order number (this will be supplied to you once checkout is completed). Our E-Tuner will look at the information you provided and start the process with you. Your E-Tune will be created using datalogs that you provide and the E-Tuner will be available to help you along the way. There will be a maximum of 3 updates to the initial tune before it's considered completed. Please allow 2-3 days for a response from the E-Tuner, he provides tunes in the order they were received. You have 1 year from the date of purchase to redeem your tune. E-Tunes are non-transferable and non-refundable if you made contact with our E-Tuner and received any files from him. Learn More -
Clutch Masters Nissan Juke 1.6T 6 Speed FX250 Clutch Kit
Regular Price: $577.50
Special Price $498.78
Clutch Masters Nissan Juke 1.6T 6 Speed FX250 Clutch Kit The FX250 System uses the Power Plus I Pressure Plate and a hybrid combination of Clutch Masters New Formula Button on one side and a heavy-duty Steel Back Organic friction lining on the other. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and have a spirited driving style. The FX250 clutch system has a higher holding capacity than a traditional full faced Kevlar without compromising the street friendly characteristics Clutch Masters is known for *Features* * High performance street system * Holding capacity 110% over stock * Heavy-Duty reinforced pressure plate * Hi-Leverage pressure ring design * Sprung hub/cushioned disc * Steel backed organic friction material *Includes* * Pressure Plate * Clutch Disc * Throw-out Bearing (when applicable) * Pilot Bearing or Bushing (when applicable) * Alignment Tool Learn More -
Sentra 2.5L Denso Oxygen Sensors (Pair/Single)
Sentra 2.5L Denso Oxygen Sensors (Pair/Single) Select Year 02 through 06. Then Upstream / Downstream or Both Superior Design Maximizes Engine Performance and Fuel Efficiency DENSO's light duty oxygen sensor started to appear on vehicles with the development of fuel injection systems. The basic job of the sensor is to monitor the air fuel mixture under idle, moderate acceleration and cruise conditions. Under heavy acceleration the oxygen sensor goes into "open loop," which basically means that the engine management computer system ignores the oxygen sensor. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio. Learn More -
B16 Sentra Goodridge Brake Lines (07-12)
Regular Price: $198.77
Special Price $139.98
G-STOP SS Braided Brake Line Kit B16 Sentra Goodridge Brake Lines (07-12) 2007-2012 Fits all B16 Sentras with front and rear disk brakes, including SpecV models. Goodridge G-Stop Brake Line Kits are constructed from the finest quality hose, consisting of a PTFE inner and stainless steel overbraid. Replacing OE brake lines with -03 PTFE hose improves brake feel over factory lines, eliminates sponginess, and provides shorter stopping distances and consistent braking in performance applications. The shorter stopping distances and improved pedal response provide safety features as well as performance advantages. All G-Stop lines go through a nine-point quality assurance testing including the materials tensile strength and 3000 psi pressure ratings. When used with an ABS braking system they virtually eliminate brake pedal “chatter”. All G-Stops conform to FMVSS106-Federal Motor Vehicle Safety Standard- making them DOT compliant and are TUV approved-the German standard that most international regulations follow. *Features* * Performance Enhancement & Safety Improvement * Eliminates Sponginess Under Braking * Increases Braking Efficiency * Abrasion and Corossion Resistent Learn More -
Cusco Sway Bar 16mm Rear Juke - 2WD ONLY
Regular Price: $334.00
Special Price $298.78
Cusco Sway Bar 16mm Rear Juke - 2WD ONLY (FWD) Vehicle Fitment Nissan Juke - All Years Vehicle Notes 2WD - Turbo model Car Position Rear Product Notes 16mm Rear Sway Bar - Add-on Type, Bolt-on kit Solid Steel BENEFITS Increased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component. Learn More -
QR25 Fully Counterweighted and Knife Edged Crankshaft
Regular Price: $1,260.98
Special Price $499.00
QR25 Fully Counterweighted and Knife Edged Crankshaft GEN 1 - QR25DE Will need to be turned/polished (journals)Normally reserved for racing applications, a knife edged crankshaft can help the engine produce more horsepower. Removing this material and bringing it to a sharp edge does a couple of things. First, knife edging can often remove pounds of weight. Less weight equates to a rotating assembly that spins with less resistance, and this in itself is responsible for some gains in horsepower.
The counterweights on a Stock Nissan crank is flat on the ends. As the crankshaft rotates, these counterweights come into direct contact with the engine's oil. This contact creates friction and splashes oil all over the bottom end of the engine. A knifed edged crankshaft actually glides through the oil much easier and encounters far less friction. Anytime friction can be reduced in an engine's rotating assembly or valvetrain, additional horsepower gains are realized. Excellent for turbo or NA applications.
IN STOCK NOW!
Learn More -
Juke "Sprint Series" Front Mount Intercooler Kit
Regular Price: $949.99
Special Price $729.98
Juke "Sprint Series" Front Mount Intercooler Kit 2JR Sprint Series FMICs are designed to be used on the street or track with no limitations in performance and to be a complete drop in kit. Can be used with Stock OEM Nissan Intercooler piping or Injen to 2JR hardpiping kit. Features and Benefits: - Direct fit for the 2011-2015 Nissan Jukes (CVT, 6MT, FWD and AWD) - all RS models all years - 27" Long intercooler design optimized for maximum flow - No modification to front bumper and retains stock fog lights - Maximum cooling efficiency with minimal pressure drop - Max power gains of 19HP and 22 feet per pounds of torque - Drops intercooler outlet temperatures by 38°F - Increases core size by 138% and fin surface area by 42% All the hardware required to complete your installation is likewise included. Learn More -
Juke FWD Downpipe (2011-2014 & RS)
Regular Price: $479.00
Special Price $398.78
Juke FWD Downpipe (2011-2014 & RS) 2JR releases their Juke Downpipe for the Nissan Juke with huge upgrades over the prev version. New stainless encased flex section, thicker 1/2" flanges, all 304 Brushed stainless. Now includes billet aluminum bracket to limit exhaust flex under load. A defouler is not required with this downpipe. If you want to make big power, this is the upgrade for you. Free flowing turbo spool, less lag and more response. Direct Fitment - no modifications to the exhaust or engine required. Up to 305wtq - stock turbo +330wtq - Mamba 21TK +440 whp - Garrett G Series Turbo Learn More -
Juke Stage I Clutch and Forged Flywheel - OEM Stock Upgrade (325hp)
Regular Price: $696.71
Special Price $629.78
Stage I Performance Carbon Ceramic Clutch and Forged Flywheel Kit Fits Nissan Juke - All Years (MR16DDT), including Nismo Models Includes Stage 1 Clutch, Flywheel and CSC (concentric slave unit) DOES NOT INCLUDE ALIGNMENT TOOL 34% Increase in clamping force Carbon and ceramic material with a performance pressure plate provides the best streetable clutch on the market today for your Nissan. This assembly is suited for bolt on upgrades up to 325hp. It provides extended life, easy engagement and great drivability. Not stiff or harsh, feels like stock. Optional LIQUI MOLY 3L Fully Synthetic Hypoid Gear Oil (GL4/5) 75W90 2JRacing has partnered with the best American Made clutch manufacturer that specializes in sport compact clutches from street driven to full race applications. These clutches are proudly used in some of the fastest sport compact race cars in the county, including a number of the most recognized industry icon vehicles. These clutches represent the finest materials, workmanship and the best customer service in the industry. Offering the higher clamping force, stronger disk designs and uncompromised satisfaction, all at the most competitive pricing. Learn More -
H&R 07-12 Nissan Altima Sport Spring
Regular Price: $439.78
Special Price $329.78
Fitment Information Nissan Altima Coupe/Sedan 4 Cyl/6 Cyl (2007, 2008, 2009, 2010, 2011, 2012 ) Specs & Features Coupe: Lowers 1.2" Front and 1.2" Rear Sedan: Lowers 1.5" Front and 1.2" Rear Includes all lowering springs Works with factory shocks or aftermarket shocks that fit stock springs. H&R Sport Springs offer superb ride quality and are H&R's number one selling product. These lowering springs offer some of the best ride characteristics of any lowering spring and offer enhanced handling while giving your car just the right amount of lowering to close the fender gap. H&R Sport lowering springs lower the vehicle center of gravity and reduce body roll for incredible handling improvements. H&R Sport springs are progressive rate and work fantastic with aftermarket, factory or performance shocks. On older vehicles we do recommend to upgrade the shocks at the same time. Includes all 4 springs for a complete setup. Learn More -
QR25 Main / Rod Bearing Set w Thrust
Regular Price: $168.40
Special Price $139.14
QR25 Main and Rod Bearing Set with Thrust Washers Fits ALL QR25 engines. Bearings are Japan Made Daido Metal OEM Spec. Thrust Washers are OEM Nissan. Bearings can be ordered in standard, +25, +50, +75 Daido Metal Engine bearings are the mainstay of Daido Metal’s operations, and have been adopted by all Japanese automobile manufacturers, as well as the majors in other countries. We have the leading market share in Japan for plain bearings for engines. Today’s sophisticated, high-technology engines pose demands for high performance and efficiency. Our bearings are also used for the high-speed engine of race cars, including Formula 1, and provide an ultra-high-tech edge in motor sports applications. Learn More -
Gen1 QR25DE OEM Headgasket Kit
Regular Price: $146.71
Special Price $118.41
Gen1 QR25DE OEM Headgasket Kit Includes OEM Nissan Headgasket and headbolts for the Gen1 QR25DE (2002-2006). 2JR also includes the copper grease for the threads of the bolts. NOTE: you will need a E20 torx bit to remove and install the OEM Bolts and a Angle Gauge - both can be added in the options below Headbolt TQ Sequence https://f01.justanswer.com/JACUSTOMERj34ssqqy/2013-03-05_013940_em_01.jpg Learn More -
OEM QR25DE Engine Timing Kit
Regular Price: $209.14
Special Price $198.71
Complete Engine timing kit for the Gen 1 QR25DE motor (2002-2006) - fits all Gen 1 QRs OEM Nissan Parts include 1. Left and Right Guide Rails 2. Chain Tensioner 3. Main Chain 4. Exhaust Sprocket 5. Lower Main Sprocket 6. Orings for Upper Pan, Front Cover and Timing Cover Does not include Intake Cam Sprocket/Phaser (can be purchased separately) or the lower chain for the balance shafts - we suggest adding the BSR Kit Learn More