Search results for 'Heat Blanket'

2JR rod sets for the QR25 are extremely durable, lightweight and cost not much more than the factory B16 rod. All come with ARP rod bolts.

H-beam rod out of 4340 high tensile steel for QR turbo applications, good for up to 700whp. These are over 25mm in thickness. 

I-Beam rod is extremely lightweight I-beam rod from 4340 that is designed for all NA and low boost (less than 450whp) applications.

Principal Design Features AISI 4340 is a heat treatable, low alloy steel containing nickel, chromium and molybdenum. It is known for its toughness and capability of developing high strength in the heat treated condition while retaining good fatigue strength. Applications Typical applications are for structural use, such as aircraft landing gear, power transmission gears and shafts and other structural parts. Tapered to Fit OEM / B16 and Frontier Pistons perfectly - as well as forged wiseco/je

Learn More

Gains of 10hp and 12ft-lb of torque!
Average intake manifold temperature decrease of 40 degrees!

Prevent heat from transferring from your heads to intake manifold and throttle body.  Improve Airflow by eliminating the need for intake gaskets.  Each spacer is CNC Machined to the highest tolerances to ensure the best airflow possible



Learn More

Mishimoto 13+ Ford Focus ST Thermostatic Oil Cooler Kit Fits all Focus ST (all years) Turbocharged, high stress 4 cylinder engines like the 2.0L EcoBoost engine in the Focus ST can overheat their oil very quickly within a few laps on the track or aggressive street driving. Even with the stock liquid-liquid head exchanger, the engine can still run very hot and run the risk of overheating the engine's coolant as well. Aggressive tunes and some track miles can significantly overheat your oil wear down your engine. Leave it to Mishimoto to come up with an oil cooling solution to your Focus ST! The Mishimoto engineers started with a large 19-row oil cooler and mounted it in the front of the vehicle where it receives the most airflow. The oil cooler was mounted on the passenger side as to not interfere with some aftermarket air intake systems. Application specific braided stainless steel lines transfer the oil from the cooler to the engine and feature -10AN fittings for an easy installation. Mishimoto engineers saw consistent temperature decreases of over 30 F (16.7 C) using our non-thermostatic sandwich plate. Proving that this oil cooler kit can withstand the stresses of the most extreme applications. This oil cooler kit is available with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty. Focus ST Oil Cooler - Benefits: https://www.youtube.com/watch?v=bngb10smBvs Install Instructions: https://www.youtube.com/watch?v=5R5wBmrT8DM&feature=youtu.be Learn More

Looking for an effective solution that will eliminate inconsistent power delivery from your turbocharged vehicle? Look no further than the all new COBB Tuning Front Mount Intercooler. The factory top mounted intercooler can easily be over worked and over heated due to its smaller size. In return, the intake air temperatures rise causing a loss in power. Replacing the factory intercooler with the COBB Tuning Front Mount Intercooler will ensure that your engine is receiving the coolest possible air, allowing you to enjoy more power that is also much more consistent! Learn More

Upgrade your hoses to 2JR's 4 ply silicone full race hose kit for the QG18DE engine (02-06 Sentra SE-R and Spec-V). These are the best hoses on the market with double layer webbing on the inside for long life and durability. Only in gunmetal because it looks damn good. IN STOCK! FULL HOSE KIT!! You can use your stock hose clamps or add new worm clamps to the order. Learn More

Fiesta ST - COBB Tuning Front Mount Intercooler with Piping Kit COBB Tuning Front Mount Intercooler: Looking for an effective solution that will eliminate inconsistent power delivery from your turbocharged vehicle? Look no further than the all new COBB Tuning Front Mount Intercooler. The factory top mounted intercooler can easily be over worked and over heated due to its smaller size. In return, the intake air temperatures rise causing a loss in power. Replacing the factory intercooler with the COBB Tuning Front Mount Intercooler will ensure that your engine is receiving the coolest possible air, allowing you to enjoy more power that is also much more consistent! Learn More

Upgrade your hoses to 2JR's 4 ply silicone full race hose kit for the QR25 engine (02-06 Sentra SE-R and Spec-V). These are the best hoses on the market with double layer webbing on the inside for long life and durability. Comes as a complete set of 4 hoses. 2 for the rad and two for the heater hoses. New for 2021, we made the upper hose 1" longer for those with 2JR rad brackets - as it moves the rad away from the header/engine You can use your stock hose clamps or add new worm clamps to the order. Learn More

The Mishimoto performance aluminum radiator for the Nissan Sentra SE-R/Spec-V is designed and engineered to maximize cooling efficiency by up to 30%, boost engine functions, and most importantly, protect your car from overheating whether you drive your vehicle daily or take it for track runs. The Mishimoto aluminum 2000-2005 Sentra radiator features a lightweight dual core, 100% brazed aluminum, and polished end tanks, enhancing the overall performance of your engine. Every Mishimoto aluminum radiator is a direct OEM fit, making installation effortless with no cutting or modification required. This is the ideal upgrade to the stock Sentra radiator. Optional: 2JR Full Hose Kit - Red / Comes with Rad AND Heater hoses 2JR Radiator Brackets Mocool Radiator Additive Mishi Aluminum Shroud with Twin Fans Learn More