Search results for 'b15'
-
Cometic Tri Layer Metal Headgasket - B15 or B16
Regular Price: $159.99
Special Price $139.99
Now available! For the B15 or B16. .030" standard thickness, 89mm bore size. Custom sizes available but take several weeks to produce. Using 1mm oversize pistons, choose 90mm bore size. Provide maximum sealing performance for today’s high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements. Learn More -
B15/B16 2.5L 330cc Nissan OEM Fuel Injector Set (4)
Regular Price: $99.99
Special Price $86.99
Sold in a Set of 4 - OEM SpecV Fuel Injectors. Professional Cleaned / Hot Tanked / Benched Tested / New Orings by Fuel Injector Connection - OEM Learn More -
QR25DE - ARP Head Stud Kit (all years)
Regular Price: $179.99
Special Price $159.99
Application: QR25DE - All years / Models (b15, b16, altima, rogue)Pro series cylinder head studs from ARP are cold-forged to ensure molecular integrity. They are heat-treated prior to thread rolling and machining and are rated at a whopping 200,000 psi for the 8740 material and 220,000 psi for ARP2000. ARP Pro series kits are also available with 12-point nuts, and all kits come complete with hardened parallel washers for an even load distribution and accurate torque readings.
Learn More -
B15 QR25DE- ARP Flywheel Bolt Kit
Regular Price: $59.99
Special Price $39.99
These Pro series flywheel bolt kits from ARP give you all that you need to bolt in your flywheel with confidence. They're much stronger than OEM hardware, are forged from aerospace alloy, and are heat-treated prior to thread rolling and machining. These bolts feature an exclusive, flat 12-point head design and a larger-than-stock shank diameter for increased strength and improved flywheel register. These bolts will only fit Forged Steel Flywheels - will NOT fit aluminum flywheels (JWT, Fidanza). Will NOT fit OEM B15 Flywheels - use OEM bolts for these. Only fits Forged Steel Flywheels. Not OEM, JWT, Fidanza
Learn More -
B15 OEM or Full Race Axle Set QR25
Regular Price: $999.99
Special Price $589.00
Sold as a pair. You have the option of getting OEM axles - or Race axles. OEMs are good for up to 500whp, while the race axles are good to over 600whp. The race axles have 38mm upgraded center shafts, forged chromoly cages, increased ball/cup design, high temp race CV grease, Neoprene road race boots and vented center sections for handling speeds in excess of 150mph for continued use. For RACE axles - *Customer Must Supply OEM Axles* **Must be factory axles with 100AC stamped into the inner CV housings Learn More -
B15 SpecV Race Header + 3" Midpipe
Regular Price: $949.00
Special Price $698.78
Long awaited Race Header for the B15 SpecV. To unlock the highest hp gains and tq, you need a header that maximizes the QRs large port sizes and torquey midrange while maximizing horsepower on the top end. Tig welded in house using only 304 stainless - no corners were cut in the development of this header. Long runner design that merges into a 4-1 with massive 2" primaries into a 3" Merge collector with a 2.75" Spike and V-Band Connection. Includes and 3" resonated midpipe. The header requires the use of aftermarket fans moved in front of the AC condenser and the 2JR Alternator Clearance Bracket. Our header will clear OEM and Aftermarket Radiators. Comes with - 3 02 Bungs - All Stainless Construction - Vband Connection to Midpipe - Stainless Flex Section in Midpipe - 3" Resonated Midpipe - Header includes the midpipe. Will bolt up to a 2.5 / 2.75 / 3.0 catback without modification (inc the Nismo) - Stainless Header Gasket and hardware - Alternator clearance bracket Learn More -
Sentra/Maxima 2JR Nismo Short Throw Shifter / optional Shifter Bushings
Regular Price: $99.99
Special Price $65.98
Nismo-style short throw billet shifter (STS) for the 2002-2006 Sentra B15 and 2002-2003 Altima/Maxima. Reduces throw by 30% without causing stress on the shifter cables which can lead to breakage. Provides a more direct, positive shift for each gear. Downside is a slight "tink" when shifting due to the billet shifter assembly. Excellent upgrade for your Nissan, especially when paired with 2JR's delrin Shifter Bushings Available in red or black The STS can used on stock Nissan shifter bushings or with 2JR's delrin shifter bushings as a combo kit. CNC'd from delrin. Replaces factory rubber bushings on the transmission with solid bushings for a more direct and crisp shift. These are the best bushings 2JR has ever produced. They will never wear out, never need grease, and never absorb water and corrode. Includes Interior and Transmission Bushings (6 pieces) ONLY FITS 2002-2006 Sentras 2002-2003 Maximas/Altimas (runs 04 interior bushing kit / 02 trans kit) Learn More -
B15 Handling Pack - RCK and UPGRADED Bump Steer Kit
Regular Price: $329.99
Special Price $199.98
NOTE! YOU MUST TRIM THE FRONT OF THE LCA TO CLEAR THE ROTOR WHEN USING THE RCK with Brembo OEM Brakes. 1mm-2mm of CLEARANCE REQUIRED! Our kit is designed to raise the front roll-center geometry by using specially engineered ball-joints in combination with our 2JR Bump Steer Kit Tie Rod Ends while still maintaining original steering geometry. Sentra McPherson front roll geometry gets worse and worse the lower you go with your B15. Coilovers, sway bars and our LCAs help but dont fix the problem. Our testing proved that raising the front roll-center resulted in a substantial increase to front roll resistance and a huge reduction in suspension compression of the outside front wheel during cornering (less roll). This improves weight distribution & maintains a better camber angle which ultimately improves front grip. The overall outcome is significantly reduced understeer through reduced front wheel compression as well as improved steering precision & vehicle stability. The 2JR RCK MUST be used with our UPGRADED BUMP STEER KIT. So the steering tie rod angle matches the lower control arm angle. Easily accomplished with our spacers included in the Bump Steer Kit. No more twitchy, hyper-active steering. This is for the street, drag, autox and track. For cars that are lowered more than 1/2" over stock. Learn More -
B15 Full-Race Solid Delrin Motor Mounts
Regular Price: $179.99
Special Price $149.99
Specially designed for the B15 Spec-V, 2JR introduces our Full Race Delrin motor mounts for the front and rear of the QR25. All of the engine's torque load gets applied to the front and rear mounts and no OEM or ES/Prothane mount can keep the motor in position like our mounts. Made from solid delrin for extra durability / long life and utilizing a tapered 2 piece design for easy install. These are the only mounts that will keep your motor in rock solid during hard acceleration. Designed for heavy street and competition use. Combo your order save an additional $10 with our Delrin Crossmember Bushings, staggered for front and rear mounts at the frame. Installs in 15min. In stock now! Learn More -
OEM Nissan B15 QR25 Full Engine Rebuild Kit (02-06)
Regular Price: $629.99
Special Price $589.98
Full rebuild kit for your Gen 1 (02-06 Sentra, Altima) QR25 that includes everything you need to rebuild your QR yourself. DOES NOT FIT THE FRONTIER
Headgasket
Intake manifold gasket
Exhaust manifold gasket
Valve cover gasket
Valve stem seals
All necessary O-rings
Front seal and rear main sealMain and Rod Bearings
10 Head Bolts
Oil Pump / Water Pump
Cam and Crank Sprockets
Main Timing Chain
Main Tensioner
All Chain Guide Rails
Learn More -
2JR Crossmember Delrin Bushings- Wheel Hop Aid (B13/B14/B15)
Regular Price: $59.99
Special Price $39.99
2002-2006 B15 Sentra 2.5L / Replace the old, worn out rubber OEM crossmember bushings with 2 piece delrin bushings from 2JR. Installed between the crossmember and chassis, at all four attachment points. Delrin absorbs some of the motor vibrations for a smoother ride. Zero flex, holds the motor solidly in place. SOLD as a set of 8 pieces, front and rear crossmember locations Can be used on a B13/14 - if you slightly open up the holes on the B13/14 crossmember. Very simple install
In Stock
Learn More -
SuperPro Rear Trailing Arm Bushings - Street/Track 95 Duro
Regular Price: $159.00
Special Price $110.99
After testing 1 set with excellent results, we have asked SuperPro to make a select set of only 10 sets of axle pivot bushings in 95K durometer for us. This is nearly 300% stronger than their normal Super Pro hardness and have grooved inner races for quiet operation to hold grease. And you reuse your original shell so install is fairly easy. Fits P10, P11, B15, N15, N16 Improve rear balance, turn in and eliminate understeer. Build for the street for no noise and track ready for full stiffness. LIMITED TO JUST 10 SETS. Learn More -
2JR QR25 High Performance Cast Piston Set with Rings 9.5-1
Regular Price: $349.99
Special Price $249.99
2JR produced turbo pistons with hastings racing ring set. Hard anodized piston domes to resist detonation. Thicker ring lands to prevent cracking. Moly coating on the skirts to lubricate piston walls. 9.5-1 Comp with the best anti-detonation quench pads on the piston tops. Good for up to 350whp. Can also be used on all NA projects since these pistons have the same comp ratio as the poorly designed B15 pistons. INCLUDES HASTINGS PISTON RINGS - Made in the USA Will fit on 2JR Forged I or H beam rods with tapered ends. Rods include ARP Rod bolts at no add't cost. Comes in the following sizes - standard .5 mm overbore (20 over) INCLUDES: 4 pistons Oil Ring and Comp Ring Set Piston Wrist Pins Wrist Pin Clips Learn More -
2JR Stage II Sprung Clutch Kit (350whp) - B15
Regular Price: $429.99
Special Price $369.99
No other clutch is built this well at this price and comes with a very easy clutch pedal. Not stiff or harsh, feels like STOCK! 2JRacing has partnered with the best American Made clutch manufacturer that specializes in sport compact clutches from street driven to full race applications. These clutches are proudly used in some of the fastest sport compact race cars in the county, including a number of the most recognized industry icon vehicles. These clutches represent the finest materials, workmanship and the best customer service in the industry. Offering the higher clamping force, stronger disk designs and uncompromised satisfaction, all at the most competitive pricing. Stage II High Performance Carbon Ceramic Clutch Kit 125% Increase in clamping force Carbon and ceramic material with a performance pressure plate provides the best streetable clutch on the market today for your Nissan. This assembly is suited for 350whp and provides extended life, easy engagement and great drivability Optional Rigid Disk for more longevity and clamping power while feeling stock - Our Choice! ALL CLUTCH KITS COMES WITH THROW OUT BEARING AND ALIGNMENT TOOL Learn More -
Mail In UpRev Reflash Service - Send in your ECU
Regular Price: $479.00
Special Price $399.00
Whether you are normally aspirated with bolt ons or turbocharged, with over 300 ROM tunes in our library we can make your Nissan run faster and make more power. We have logged 1000+ dyno pulls with different mod combinations. Send your ECU to 2JR, and in 24hrs (1 business day) we will ship back to you a Uprev/2JR tuned ECU. Ship to: 2J-Racing 1685 Redi Rd Cumming GA 30040 Parameters that we will tune include: Idle RPM Speed Limiter Electronic Throttle Control to achieve Wide Open Throttle at all speeds. Rev Limiter DTC disable AFR Targets Fuel Compensation (for NA or Turbo cars) Ignition Timing Advance Cam Phasing Learn More -
2JR SuperPro Front LCA Bushing Kit ONLY
Regular Price: $314.99
Special Price $251.99
2JR introduces a special line of Front Lower Control Arm bushings for your B15 (all models). We contracted SuperPro to make the front LCA bushings in its highest durometer available at 95K for the front bushings. This is a 200% improvement over stock and 140% stronger than ES bushings and standard SuperPro bushings. For the rear section of the LCA we added double caster offset bushings set in a steel sleeve with 95K duro interference bushing to keep the Rear LCA mount solid and prevent any flex under load. Increased caster provides straight line stability. These are the best street/strip LCA bushings we've ever tested. In stock and shipping daily. The kit includes the front and rear bushings ONLY. We also offer these bushings installed in new LCAs Learn More -
2JR Hi-Power Intake Plenum-Full Kit
Regular Price: $899.99
Special Price $699.00
2JR introduces the best intake plenum for your 1st gen QR with custom CNC milled throttle plates, machined and decked head surfaces to maximize power and gains while providing no ECU fault codes or issues. Huge mid range gains with excellent top end performance. No tune is required. For both NA (low and high comp) and forced induction applications (up to 20psi). Expect quicker throttle response and improved driveability. Both on and off the street. Includes a new high-capacity fuel rail and all hardware necessary for a complete install. Optional is our 2JR 1-piece Moto-style cold air intake. Save over $45 when you purchase both together. NOTE! IF YOU ADD THE 76MM PLENUM SPACER MOD - YOU DONT NEED THE 5" SILICON COUPLER. The plenum spacer mod adds a ton of volume to the hi-power plenum. Its a MUST HAVE! OVER 28whp in the midrange. The highest hp mod available for the B15. Install instructions: https://www.facebook.com/206550699368164/videos/148839433766275 Learn More -
2JR Underdrive Lightweight Power Steering Pulley (QR25)
Regular Price: $89.99
Special Price $69.98
2JR releases the lightest power steering pulley ever made for the B15. The underdrive size increases the torque and horsepower output of the QR25 by reducing parasitic drag caused by the belt-driven power steering, but more importantly by reducing the moment of inertia. Excellent steering feel and with a more weighted response in the wheel. No more pump cavitation during extreme cornering. Color:Blue, Black or Red Hard Anodized, 2JR Logo Weighs just 11oz!! Dayco poly rib #5060895 belt REQUIRED. Or similar 89.5" length belt Fits 02-06 Nissan Sentra SE-R & Spec-V (2.5L) 02-06 Nissan Altima 2.5L Does not fit B16s Learn More -
2JR Lower Control Arms with SuperPro Bushings
Regular Price: $501.99
Special Price $439.98
STAGE I - Custom for 2JR, 95 Duro SuperPro Bushing set - already installed in new LCAs with NEW 555 Japanese (JDM) Ball Joints. STAGE II - You can also add the 2JR Full Race Tall Ball Joints (Roll Center Kit RCK) See options below. The RCK and Bump Steer Kit must be used together as they MUST work in tandem to align the suspension correctly. If the RCK/Bump option isnt check, the LCAs will ship with 555 JDM ball joints. Includes both Left and Right Arms, all new arms, ball joints and SuperPro double offset caster bushings. SuperPro: 2JR introduces a special line of Front Lower Control Arm bushings for your B15 (all models). We contracted SuperPro to make the front LCA bushings in its highest durometer available at 95K for the front bushings. This is a 200% improvement over stock and 140% stronger than ES bushings and standard SuperPro bushings. For the rear section of the LCA we added double caster offset bushings set in a steel sleeve with 95K duro interference bushing to keep the Rear LCA mount solid and prevent any flex under load. Increased caster provides straight line stability. These are the best street/strip LCA bushings we've ever tested. Allow 7-10 days for production of the LCAs. These are made to order Learn More -
2JR 25mm Fully Adjustable Rear Sway Bar (B15)
Regular Price: $349.99
Special Price $299.98
2JR 25mm Fully Adjustable Rear Sway Bar (B15)The best rear sway bar ever created for the B15 chassis (fits all models) is now available through 2JR. Massive 25mm fully adjustable rear bar, installs in under 45m with no drilling required. Improve lateral stiffness and cornering. 200% more torsional rigidity than the Eibach rear sway bar. For the best street and track performance, this is the bar you want. Only available in a limited run.
Now Combo Options with either SuperPro Rear Bushings or Full SuperPro Rear Bushing Kit that includes the Rear Trailing Arm bushings and all the bushing in the Scott Russell Link/ - inc the dog bone Learn More