Search results for '04'
-
UpRev MAF GT
Regular Price: $399.98
Special Price $379.98
UpRev MAF GT The UpRev MAF GT is an upgraded sensor for Nissan Vehicles. The sensor retains the same connector and pin-out as vehicles using the following part numbers Fits 2004-2012 QR25DE Sentra / Altima and Frontier 2003-2017 350/370Z 2011-2017 Nissan Juke Nissan – 22680-7S000 Hitachi – W0133-1723137 Hitachi – MAF0031 This sensor is not a factory replacement, ECU calibration is required in order to use the UpRev GT MAF. The GT MAF voltage scale has been changed to suite higher airflow and so the ECU should be calibrated to suit the different voltage curve. This MAF is capable of reading up to 600hp on a factory 350Z VQ35DE MAF housing, can read higher numbers with a bigger MAF housing. 3" or Larger MAF housing is preferred. Learn More -
Cobb Ford Focus ST/RS Accessport V3 A-Pillar Mount
Regular Price: $84.98
Special Price $69.99
Cobb Ford Focus ST/RS Accessport V3 A-Pillar Mount The AP V3 A-Pillar Mount attaches to the driver's side A-Pillar. The swivel allows the driver to set the angle of the AP for optimal viewing. Installation is simple and quick. The mount uses the spaces between the panels with no need to dismantle the interior and no damage is caused by proper installation. Mounting your AP to the A-Pillar with the ProClip USA Vehicle Mount will keep your device in the perfect location. View the data displayed on your AP without taking your eyes off the road! Features Ford Accessport V3 A-Pillar Mount Focus ST 2013-2018, Focus RS 2016-2018 Includes both swivel and mount Made of high grade ABS plastic Quick and simple installation Works for LHD Only Keep your Accessport within reach while in the driver's seat Learn More -
COBB Cold Air Intake System Redline Carbon Fiber Focus ST / RS
Regular Price: $750.00
Special Price $739.68
COBB Redline Carbon Fiber Cold Air Intake System Vehicle Fitment: - 2013-2018 Focus ST - 2016-2018 Focus RS If you are dreaming of freeing up the airflow and add a level of refinement under the hood of your 2013-2018 Focus ST or 2016-2018 Focus RS without any compromises, you have come to the right place! CJ Pony Parts is pleased to provide you with a brand new COBB Redline Carbon Fiber Cold Air Intake System (793150) for your 2013-2018 Focus ST or 2016-2018 Focus RS. The COBB Ford Focus ST/RS Redline Carbon Fiber Intake is a great way to dress up your engine bay while increasing engine performance at the same time! Features and Benefits: - 3k tow 2x2 Twill Carbon Fiber Construction - Large 3" piping for ideal flow - Pre-Oiled and Re-usable Dual Cone Air Filter - Black 4-ply Silicone Couplers - Black E-Coated 304 Stainless Steel Clamps - Made in the USA The carbon fiber tube and airbox lid are constructed of a 3k tow in a 2x2 twill weave pattern. Everything is held together with black 4-ply silicone couplers accompanied by black e-coated 304 stainless steel hardware. A gloss finish and bespoke Redline-specific badge keeps everything tidy under the hood. Included is a pre-oiled, dual cone, filter to increase airflow and amplify that great turbo sound. This intake is a complete factory replacement all the way to the turbo and is compatible with the original factory tune and all available COBB OTS maps. Tech Tip: To get the maximum performance out of your Focus ST or RS, pair this COBB Carbon Fiber Cold Air Intake System with a COBB Accessport V3 (P/N: AP3FOR001 and AP3FOR004). Learn More -
H&R Sport Springs | 2014+ Ford Focus ST
Regular Price: $439.98
Special Price $304.78
H&R Sport Springs | 2014+ Ford Focus ST Fun to drive, H&R Sport Springs are the number one upgrade for your vehicle. Features Reduces Body Roll for Better Handling Superior Ride Quality and Comfort Reduces Wind Resistance and Improves Fuel Economy Lowers 1.4in Front and 1.3in Rear Applications: 2014+ Ford Focus ST What's In The Box? 2 - Front Springs 2 - Rear Springs Learn More -
EBC 2019+ Toyota Corolla 2.0L Greenstuff Front Brake Pads
Regular Price: $113.53
Special Price $104.78
Designed for premium street driving offering better brake effect up to 600-degrees C (1100-degrees F). EBC Greenstuff has a high initial brake effect and gives drivers confidence from first application of the brake pedal. There is no such thing as a NO DUST pad. The very nature of how a brake works requires that some dust be generated to avoid rotor vibration (shimmying). The EBC pad creates less dust and dust is more easily washed off than most. All pads create more dust as they are bedding in especially if rotors are worn. Nominal friction coefficient 0.55. For heavier faster cars and vehicles above 200bhp we strongly recommend Redstuff which DOES offer much less dust. Fits Hatch and Sedan 2.0L Learn More -
Garrett GT3076R Turbo
Regular Price: $1,725.98
Special Price $1,695.98
Garrett GT3076R Ported Shroud T04E 4" CompHsg + T3 .82 A/R Turbine Hsg w/ T31 (Narrow) 4 Bolt Exit PRODUCT DESCRIPTION: This is a full size GT3076R turbo with the 60mm Turbine and 76mm compressor wheel set up in the T3 Turbine housing and the native (T04E Frame) Compressor Housing with a Ported Shroud (Anti-Surge), 4” inlet and 2” outlet. Garrett GT3076R ball bearing turbocharger and the popular .82 A/R - T31 4 bolt Turbine Housing (Undivided Entry T3 .82 A/R Turbine Housing with the “Narrow” 4 bolt exit). 525+HP potential flow. The larger 60mm turbine wheel compliments the 76mm compressor to make power without compromise. PRODUCT FEATURES: Genuine Garrett GT Aero compressor wheel Genuine Garrett GT Inconel turbine wheel Dual ball bearing CHRA rotating assembly Compressor Wheel Inducer: 57mm / Compressor Wheel Exducer: 76mm / Compressor Wheel Trim: 56 / Compressor Housing A/R: 0.60 / Turbine Wheel Inducer: 60mm / Turbine Wheel Exducer: 55mm / Turbine Wheel Trim: 84 Learn More -
Nissan Juke FWD Midpipe
Regular Price: $299.99
Special Price $269.78
Nissan Juke FWD Midpipe Application: Nissan Juke FWD Front Wheel Drive - CVT and Manual SV, S and RS Models Years: 2011 to 2017 Material: Stainless Steel / Polished Size: 70mm Defouler included in the midpipe for no check engine luight 2JR introduces their 70mm Full 304 Stainless Steel Midpipe for the FWD Nissan Juke. Gains over 20wtq and 15whp without a tune!! Made from 4mm thick 304 Stainless Steel for long life, corrosion resistance and strength in the harshest environment. Direct bolt on with no modification required. And no check engine light because an 02 Spacer is built in to the midpipe! Removes the second cat in the midpipe - the primary cat remains in the downpipe. No smell, no noise - and over 20wtq!! Learn More -
Remark 2019+ Toyota Corolla Hatchback Quad-Exit Cat-Back Exhaust Stainless Steel
Regular Price: $995.98
Special Price $899.78
Remark 2019+ Toyota Corolla Hatchback Quad-Exit Cat-Back Exhaust Stainless Steel PRODUCT FEATURES : Direct bolt-on easy installation to the OEM factory piping 2.5inch, 16 gauge T304 stainless steel, mandrel bent pipe OEM factory style exhaust hanger rod construction 3.5inch quad tips (2 on each side) Burnt tip Double Wall tip design Gaskets and bolts are included High quality hand welding Learn More -
2JR 3" Performance Corolla GR Catback - IN STOCK
Regular Price: $1,498.98
Special Price $879.98
2JR Performance Corolla GR Catback Transform the driving experience of your GR Corolla with our Performance Street exhaust system; engineered to take your GR to the next level. Through our extensive development and testing process, we’ve been able to strike the perfect balance between sound and performance. Creating something very special for the giant-killing Corolla GR. Our Catback employs laser welded heat shielding to help keep the rear diff cool along with V-Band Tail Sections with Vibrant Front and Rear Twin Resonators. Whether you are running our GR Midpipe or the OEM Midpipe - this catback will produce a clean, deep and exotic sound with no rasp or annoying resonance/drone. It truly is unlike any GR you've heard before. Features: 3″ cat back system in brushed 304 stainless steel Twin V-Band Vibrant Resonators Large Center Resonator Brushed double rolled tips - with T bolt Clamps Stainless Steel Hardware and Gaskets Fits both OEM and 2JR Midpipe options Fitment: Toyota Corolla GR Learn More -
E210 Borla Resonated Midpipe (Hatch/Sedan) Ultra Quiet
Regular Price: $589.98
Special Price $449.78
E210 Borla Resonated Midpipe (Hatch/Sedan) Ultra Quiet Very Limited Production The quietest performance midpipe for your E210 Hatch or Sedan is now available in very limited quantities. 2JR pairs the largest Borla available with the option to add a high flow cat, allowing all the performance gains from a 2.5" midpipe (up from 1.6" stock) and none of the noise or rasp. Removes the rasp from your Remark or other catback to tame the loudness while driving. Made from 304 Stainless Steel and mandrel bends then tig welded to perfection. Will fit on the OEM and aftermarket exhausts as well as 2JR and OEM headers. Includes rear gasket, bolts and nuts. Fits Sedan and Hatchback Note: Does not fit Borla Brand Catbacks - they use a loose flange at the start of their catbacks that will not mate up to the 2JR Midpipes. You will have to weld the Borla Catback flange to the catback to make it work. NOTE: Production Time is 2-3 Weeks after the order is placed Learn More -
(Hatch) Race Side Exit Catback Exhaust
Regular Price: $420.00
Special Price $399.78
(Hatch) Race Side Exit Catback Exhaust Weighs under 10lbs! Designed for track use with hard chassis mount w/isolator and sits tucked up high for extreme low E210s. Options include: - Full Race without a Resonator - 8DB Quieter with Optional Resonator (+$45) Tip Style: - Stainless Oval Single Tip - NASCAR 10" Boom Tube with 2JR Logo (+$95) - Quad (4) 1 3/4" Stainless Tips (+120) Exhaust is full stainless steel for long life. Refer to the attached photo for install tips! Specs: 2.5" 304SS with Flex Race Spec Resonator (optional) Hard Chassis Mount with Rubber Isolator Bolts directly to OEM Midpipe or 2JR Midpipe No cutting or Fab work required Note: You must remove the heat shielding and plastic where the exhaust routes. This easily unbolts from the chassis. Heat Shielding around the gas tank remains. Learn More -
EBC Racing 2023 Toyota Corolla GR RP-1 Race Front Brake Pads
Regular Price: $249.00
Special Price $239.78
EBC Racing 2023 Toyota Corolla GR RP-1 Race Front Brake Pads DP82430RP1 - EBC RP-1 Brake Pads; Front EBC Racing's RP‑1 compound is an ultra‑high performance track and race pad designed for high performance vehicles driven hard on track. Designed for vehicles driven hard on track, RP-1 possesses a moderately high friction level of 0.45 between 100 – 750°C. The more progressive response characteristic of RP-1 makes it well suited for inherently ‘over-servoed’ vehicles where a softer pad material is desirable to allow greater finesse when on the brakes. The RP-1 pads provide superb modulation giving unprecedented control and feel, come thermally-bedded, eliminating “early life” fade and have an extremely low wear rate making them a true “plug and play” track pad. Specifications: More Information Manufacturer EBC UPC/EAN Code 5039222824304 Brake Pads Type Race Package Contents 1 set of pads for two calipers Pad Quality Premium Inner Pad Thickness (mm) 14,70 Inner Pad Height (mm) 85,70 Inner Pad Width (mm) 133,50 Outer Pad Height (mm) 85,70 Outer Pad Thickness (mm) 14,70 Outer Pad Width (mm) 133,50 Pad Label RP-1 Learn More -
MBRP Toyota Corolla GR 1.6L T304 SS 3in Cat-Back Dual Center Rear w/ Burnt End Tips
Regular Price: $988.12
Special Price $899.78
MBRP 2023 Toyota Corolla GR 1.6L T304 SS 3in Cat-Back Dual Center Rear w/ Burnt End Tips T304 Stainless Steel, 3" Cat Back, Dual Center Rear Outlet with Dual Burnt End Tips THE ONLY EXHAUST YOU"LL EVER NEED - MBRP Armor Pro Series exhaust systems are backed by a Lifetime Warranty and crafted out of T304 Stainless Steel - the most durable material grade that money can buy. The T304 Stainless Steel tubing is easy to clean and maintain. It’s the obvious choice for you if you operate your vehicle in extreme conditions. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great. Learn More -
MBRP Toyota Corolla GR 1.6L T304 Stainless Steel 3in Cat-Back Dual Split Rear w/ Burnt End Tips
Regular Price: $1,129.78
Special Price $1,098.78
MBRP Toyota Corolla GR 1.6L T304 Stainless Steel 3in Cat-Back Dual Split Rear w/ Burnt End Tips T304 Stainless Steel, 3" Cat Back, Dual Rear Outlet with Dual Burnt End Tips THE ONLY EXHAUST YOU"LL EVER NEED - MBRP Armor Pro Series exhaust systems are backed by a Lifetime Warranty and crafted out of T304 Stainless Steel - the most durable material grade that money can buy. The T304 Stainless Steel tubing is easy to clean and maintain. It’s the obvious choice for you if you operate your vehicle in extreme conditions. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great. Learn More -
MBRP Toyota Corolla GR 1.6L T304 SS 3in Cat-Back Dual Split Rear w/ Carbon Fiber Tips
Regular Price: $1,199.78
Special Price $1,059.78
MBRP 2023 Toyota Corolla GR 1.6L T304 SS 3in Cat-Back Dual Split Rear w/ Carbon Fiber Tips T304 Stainless Steel, 3" Cat Back, Dual Rear with Carbon Fiber Tips THE ONLY EXHAUST YOU"LL EVER NEED - MBRP Armor Pro Series exhaust systems are backed by a Lifetime Warranty and crafted out of T304 Stainless Steel - the most durable material grade that money can buy. The T304 Stainless Steel tubing is easy to clean and maintain. It’s the obvious choice for you if you operate your vehicle in extreme conditions. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great. Learn More -
MBRP Toyota Corolla GR 1.6L T304 SS 3in Cat-Back Dual Center Rear w/ Carbon Fiber Tips
Regular Price: $999.98
Special Price $989.78
MBRP 2023 Toyota Corolla GR 1.6L T304 SS 3in Cat-Back Dual Center Rear w/ Carbon Fiber Tips T304 Stainless Steel, 3" Cat Back, Dual Center Rear with Carbon Fiber Tips THE ONLY EXHAUST YOU"LL EVER NEED - MBRP Armor Pro Series exhaust systems are backed by a Lifetime Warranty and crafted out of T304 Stainless Steel - the most durable material grade that money can buy. The T304 Stainless Steel tubing is easy to clean and maintain. It’s the obvious choice for you if you operate your vehicle in extreme conditions. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great. Learn More -
PRE ORDER 3" Resonated Midpipe Corolla GR
Regular Price: $479.98
Special Price $359.78
3" Resonated Midpipe Corolla GR Limited Run of GR Race Resonated 3" Midpipes opens now for the Corolla GR. Made from 304 Stainless Steel and Tig Welded (back-purged) to ensure the highest flow, then paired with a large resonator to reduce rasp and noise. Bolts directly to the OEM Downpipe and designed to fit on the OEM and aftermarket catback exhausts. Increases sound levels by 4-6DB over stock with OEM Catback. Includes HD Front Donut gasket to Downpipe. You will reuse your OEM Spring Bolts for the Fr / Rr of the midpipe as well as the rear OEM Donut gasket. * CNC'd 1/2" Rear Flange for Heavy Use * Race Spec Resonator / Stainless Learn More -
Stage 1 - SR Turbo / Nismo 304 Stainless Catback + Midpipe
Regular Price: $798.89
Special Price $729.78
Stage 1 - SR Turbo / Nismo 304 Stainless Catback + Midpipe Includes: 2JR Carbon Catback 2JR Midpipe w/defouler Big power gains / no check engine lights / retains the factory front cat / amazing sound without the rasp. Looking for the best sound, performance and quality for your 2017-2019 Nismo Sentra SR and Nismo (1.6L Turbo) and 1.8L Non Turbo. Look no further than our hand-tig welded 2.5" stainless catback with 3.5" Carbon/Blue tip. Includes a long front resonator to remove the rasp and produce that deep, clean sound you've been searching for. It also comes with 3 hard hangers for the tail section, stainless hardware and gaskets for a complete bolt-on system. Includes Remember, the factory turbo exhaust is a mere 49mm - and highly restrictive under boost. Unless your car's potential with 2JR. Sound Clip Learn More -
Race Spec Catted / Resonated Midpipe (Hatch/Sedan)
Regular Price: $469.98
Special Price $398.78
Limited Run of Catted/Resonated Midpipes for the E210 Hatch and Sedan. Made from 304 Stainless Steel and mandrel bent to ensure the highest flow then paired with a stainless flex section and resonator to reduce rasp and noise. Will fit on the OEM and aftermarket exhausts as well as 2JR and OEM headers. Includes rear gasket, bolts and nuts. CNC Front Flange for Track Abuse Smaller Core / Free Flow Cat Race Spec Resonator / Preforated Caged Rear Flex Section for Hard Launches Made by 2JR and hand welded to perfection. We use only the best exhaust components for a complete full stainless system. Stainless perforated core for extra long life. Sounds absolutely AMAZING Fits Sedan and Hatchback Note: Does not fit Borla Brand Catbacks - they use a loose flange at the start of their catbacks that will not mate up to the 2JR Midpipes. You will have to weld the Borla Catback flange to the catback to make it work. Learn More -
Corolla Hatch and GR 9LR Wing
Regular Price: $1,049.98
Special Price $969.78
Corolla Hatch and GR 9LR Wing Limited to 10 Sets 2JR and 9LR paired up to create a fully functional and exceptionally sexy wing for the E210 Hatch/GR. Designed for Track Use - increases grip by over 35% above 80mph. Can be used with the OEM High Upper wing, although its not suggested for proper downforce. You must drill through your composite hatch to install the wing. It's not difficult if you're handy with the tools. Take your time and measure correctly. Install Time - 2 Hours. Features Light Aluminum construction. 0.2lbs per inch Gurney flap ready Up to 15.2:1 Lift-to-Drag ratio* Low drag = More top speed! American Made Built to meet rules set by PCA, NASA, GTA, and Gridlife. Track Tested Learn More