Search results for 'ac delete'

Cobb Ford Focus ST Sound Symposer Delete - Stealth Black The COBB Sound Symposer Delete kit for the 2013+ Ford Focus ST is a quick and easy solution for not only deleting your sound symposer to allow you to truly hear your car but also adds an easily accessible boost source for future modifications. Features Ford Focus ST Sound Symposer Delete 6061 Aluminum Construction Black Anodized Finish Laser Etched COBB Logo Easily Reversed Back to Stock Uses Factory Hardware Learn More

2JR Extreme Titanium Axleback (Sedan)

We proudly carry exclusive performance titanium exhaust options brought to you by Vibrant and Ticon. Made at our facility for your E210.

Can't decide if you want to hang this on your living room wall or on your E210? We get it, and we certainly won't argue with your choice. This is 2JR's Extreme Titanium Axle Back Exhaust System for the E210 Sedan. Featuring titanium construction for the axle back and stainless steel front and midsections. The axle back Ti section combines a larger piping diameter with smooth bends which also feature JDM-inspired pie cuts. The result is more horsepower and torque, a good amount in weight savings, all while producing a race-inspired exhaust note. A great investment for your daily driver, weekend show car, or purpose-built race car as it is an exclusive part that will add style, value, and performance.

MUST READ!!! IF YOU CURRENTLY OWN A 2JR CATBACK WHERE THE FRONT 2 SECTIONS OF PIPING MATCH THE PHOTO - YOU CAN DELETE THE PIPING AND ORDER THE AXLE BACK PORTION ONLY.  IF YOU ARE UNSURE OF WHICH KIT YOU HAVE - SEND US AN EMAIL AND WE WILL CONFIRM WITH YOU BEFORE SHIPPING YOUR ORDER

HIGHLIGHTS:

Full titanium 2.5" piping diameter - axle back portion
4" tip size / Stainless Steel Slip On Design
1mm Main pipe thickness
Stainless Steel Mid and Front sections
6mm Flange thickness
Racing Layout - minimal bends and curves allow exhaust gases to escape quickly
Dry Race Sound - provides a true race exhaust sound that titanium materials can provide
New hardware and gasket will be provided to make this exhaust system ready for the installation

Learn More

2JR Extreme XL Titanium Axleback (Sedan)

We proudly carry exclusive performance titanium exhaust options brought to you by Vibrant and Ticon. Made at our facility for your E210.

Can't decide if you want to hang this on your living room wall or on your E210? We get it, and we certainly won't argue with your choice. This is 2JR's Extreme XL Titanium Axle Back Exhaust System for the E210 Sedan.  Featuring titanium construction for the axle back and stainless steel front and midsections. The axle back Ti section combines a Vibrant Full Ti XL Muffler with smooth bends which also feature JDM-inspired pie cuts. The result is more horsepower and torque, a good amount in weight savings, all while producing a race-inspired exhaust note. A great investment for your daily driver, weekend show car, or purpose-built race car as it is an exclusive part that will add style, value, and performance.

Fits all Sedan Models

MUST READ!!! IF YOU CURRENTLY OWN A 2JR MAGNAFLOW CATBACK WHERE THE FRONT 2 SECTIONS OF PIPING MATCH THE PHOTO - YOU CAN DELETE THE PIPING AND ORDER THE AXLE BACK PORTION ONLY.  IF YOU ARE UNSURE OF WHICH KIT YOU HAVE - SEND US AN EMAIL AND WE WILL CONFIRM WITH YOU BEFORE SHIPPING YOUR ORDER.  IF YOU HAVE THE QUAD CARBON SEDAN CATBACK, YOU WILL NEED TO ORDER ALL THE PIPING.

HIGHLIGHTS:

Full titanium 2.5" piping diameter - axle back portion
Vibrant XL Ti Muffler
1mm Main pipe thickness
Stainless Steel Mid and Front sections
6mm Flange thickness
Racing Layout - minimal bends and curves allow exhaust gases to escape quickly
Dry Race Sound - provides a true race exhaust sound that titanium materials can provide
New hardware and gasket will be provided to make this exhaust system ready for the installation

Learn More

2JR Extreme Titanium Quad Carbon Axleback (Hatch)

We proudly carry exclusive performance titanium exhaust options brought to you by Vibrant and Ticon. Made at our facility for your E210.

Can't decide if you want to hang this on your living room wall or on your E210? We get it, and we certainly won't argue with your choice. This is 2JR's Extreme Titanium Quad Carbon Axleback Exhaust System for the E210 Hatch. Featuring titanium construction for the axle back and stainless steel front and midsections. The axle back Ti section combines a larger piping diameter with smooth bends which also feature JDM-inspired pie cuts. The result is more horsepower and torque, a good amount in weight savings, all while producing a race-inspired exhaust note. A great investment for your daily driver, weekend show car, or purpose-built race car as it is an exclusive part that will add style, value, and performance.

Designed to fit under your OEM Rear Bumper, Rear Diffuser or 2JR Bash Bar

MUST READ!!! IF YOU CURRENTLY OWN A 2JR CATBACK WHERE THE FRONT 2 SECTIONS OF PIPING MATCH THE PHOTO - YOU CAN DELETE THE PIPING AND ORDER THE AXLE BACK PORTION ONLY.  IF YOU ARE UNSURE OF WHICH KIT YOU HAVE - SEND US AN EMAIL AND WE WILL CONFIRM WITH YOU BEFORE SHIPPING YOUR ORDER

HIGHLIGHTS:

• Full titanium 2.5" piping diameter - axle back portion
• Quad Carbon Tips (Gold Center) - Stainless Steel Y Piping
• 1mm Main pipe thickness
• Stainless Steel Mid and Front sections
• 6mm Flange thickness
• Racing Layout - minimal bends and curves allow exhaust gases to escape quickly
• Dry Race Sound - provides a true race exhaust sound that titanium materials can provide
• New hardware and gasket will be provided to make this exhaust system ready for the installation

Learn More

2JR Extreme Titanium Center Exit Axleback (Hatch)

We proudly carry exclusive performance titanium exhaust options brought to you by Vibrant and Ticon. Made at our facility for your E210.

Can't decide if you want to hang this on your living room wall or on your E210? We get it, and we certainly won't argue with your choice. This is 2JR's Extreme Titanium Center Exit Axle Back Exhaust System for the E210 Hatch. Featuring titanium construction for the axle back and stainless steel front and midsections. The axle back Ti section combines a larger piping diameter with smooth bends which also feature JDM-inspired pie cuts. The result is more horsepower and torque, a good amount in weight savings, all while producing a race-inspired exhaust note. A great investment for your daily driver, weekend show car, or purpose-built race car as it is an exclusive part that will add style, value, and performance.

Designed to fit under your OEM Rear Bumper or 2JR Bash Bar

MUST READ!!! IF YOU CURRENTLY OWN A 2JR CATBACK WHERE THE FRONT 2 SECTIONS OF PIPING MATCH THE PHOTO - YOU CAN DELETE THE PIPING AND ORDER THE AXLE BACK PORTION ONLY.  IF YOU ARE UNSURE OF WHICH KIT YOU HAVE - SEND US AN EMAIL AND WE WILL CONFIRM WITH YOU BEFORE SHIPPING YOUR ORDER

HIGHLIGHTS:

• Full titanium 2.5" piping diameter - axle back portion
• Twin Vibrant Ti Resonators with Ti Turn Downs
• 1mm Main pipe thickness
• Stainless Steel Mid and Front sections
• 6mm Flange thickness
• Racing Layout - minimal bends and curves allow exhaust gases to escape quickly
• Dry Race Sound - provides a true race exhaust sound that titanium materials can provide
• New hardware and gasket will be provided to make this exhaust system ready for the installation

Learn More

2JR Extreme Titanium Axleback (Hatch)

We proudly carry exclusive performance titanium exhaust options brought to you by Vibrant and Ticon. Made at our facility for your E210.

Can't decide if you want to hang this on your living room wall or on your E210? We get it, and we certainly won't argue with your choice. This is 2JR's Extreme Titanium Axle Back Exhaust System for the E210 Hatch. Featuring titanium construction for the axle back and stainless steel front and midsections. The axle back Ti section combines a larger piping diameter with smooth bends which also feature JDM-inspired pie cuts. The result is more horsepower and torque, a good amount in weight savings, all while producing a race-inspired exhaust note. A great investment for your daily driver, weekend show car, or purpose-built race car as it is an exclusive part that will add style, value, and performance.

NOTE: Built for the 2JR Bash Bar (not included)

MUST READ!!! IF YOU CURRENTLY OWN A 2JR CATBACK WHERE THE FRONT 2 SECTIONS OF PIPING MATCH THE PHOTO - YOU CAN DELETE THE PIPING AND ORDER THE AXLE BACK PORTION ONLY.  IF YOU ARE UNSURE OF WHICH KIT YOU HAVE - SEND US AN EMAIL AND WE WILL CONFIRM WITH YOU BEFORE SHIPPING YOUR ORDER

HIGHLIGHTS:

• Full titanium 2.5" piping diameter - axle back portion
• 4.5" tip size
• 1mm Main pipe thickness
• Stainless Steel Mid and Front sections
• 6mm Flange thickness
• Racing Layout - minimal bends and curves allow exhaust gases to escape quickly
• Dry Race Sound - provides a true race exhaust sound that titanium materials can provide
• New hardware and gasket will be provided to make this exhaust system ready for the installation

Learn More

B15 Triple Gauge Pod - Radio Delete/Pocket Built by Ortiz Custom Pods. B15 Triple Gauge Pod - Radio Delete/Pocket for the B15 Sentra. Fits 52mm Gauges. Radio can be moved to the pocket under the HVAC controls. Learn More

Fiesta ST - Mountune Sound Symposer Delete The mountune Sound Symposer Delete for the Fiesta ST easily installs with original hardware and provides a functional way to remove the symposer assembly allowing a more natural engine sound. High quality fittings are also included that allow an easily accessible source for boost pressure for additional modifications or engine monitoring. Easily mounts on intake tract. CNC Aluminum (HE30) Durable black anodized finish Machined mountune motorsport M logo High quality fittings included Easy installation Learn More

AC Delete Kit (Non-OEM) Fits all years, QR25 (02 and up) - removes the AC compressor and replaces it with free spinning pulley, bracket and hardware (included). NO NEW BELT CHANGE REQUIRED. Uses same size as stock belt. Free up some HP, less drag on the QR. Learn More

Titanium Extreme Sedan Apex Catback (Quad) Released in limited quantities, a Titanium Extreme Sedan Apex Catback (Quad) is now available for your E210 sedan. No rasp, just deep, clean sound and big performance gains - we use Ticon Industries Titanium Ultra Quiet Mufflers and all Titanium Tail Section to either quad polished or quad carbon tips. Built with only the best parts available - including twin Vibrant Ultra Quiet Mufflers, 2.5" Stainless Steel piping and integrated flex section. Designed to fit your OEM or 2JR Midpipe (Race or Borla) Add the 2JR Midpipe and Header for the most power, sound and performance. NOTE: YOU MUST TRIM YOUR BUMPER TO FIT ON THE DR SIDE. REMOVE THE OEM REAR HANGER (pass side) AND RUBBER GROMMETS (dr side) IN THE FRAME RAIL. USE THE INC'D 2JR BOX HANGERS AND 10x1.25 FINE THREAD BOLTS IN THE FRAME RAILS TO HOLD THE BOX HANGERS IN PLACE. Threaded holes exist in these locations. DO NOT USE THE 10x1.5 BOLTS IN THE FRAME RAILS HIGHLIGHTS: Full titanium 2.5" piping diameter - axle back portion Quad tips size / Stainless Steel Slip On Design 1mm Main pipe thickness Stainless Steel Mid and Front sections 6mm Flange thickness Racing Layout - minimal bends and curves allow exhaust gases to escape quickly Dry Race Sound - provides a true race exhaust sound that titanium materials can provide New hardware and gasket will be provided to make this exhaust system ready for the installation E210 Sedan APEX ONLY - fits Manual and CVT Learn More

Injen Cold Air Intake 2007-2012 Nissan Altima L4-2.5L Fits all 07-09 Altimas with the QR25 2.5L - Aggressive engine tone under full throttle Available in Black or Polished Direct fit for 2007-2012 Nissan Altima L4-2.5L / Dyno Proven gains of up to 10 hp and 11 lb-ft. of torque Features Injen’s patented MegaRam (MR) Technology / Features Injen’s patented Air Fusion Technology / Provides power gains while maintaining A/F ratios No additional tuning required / Includes Universal Heat shield / Fully serviceable Injen SuperNano-Web dry air filter / Replacement air filter part number X-1014-BB Optional hydroshield part number 1033BLK or 1033RED CARB EO #: D-476-8 Learn More

UpRev MAF GT The UpRev MAF GT is an upgraded sensor for Nissan Vehicles. The sensor retains the same connector and pin-out as vehicles using the following part numbers Fits 2004-2012 QR25DE Sentra / Altima and Frontier 2003-2017 350/370Z 2011-2017 Nissan Juke Nissan – 22680-7S000 Hitachi – W0133-1723137 Hitachi – MAF0031 This sensor is not a factory replacement, ECU calibration is required in order to use the UpRev GT MAF. The GT MAF voltage scale has been changed to suite higher airflow and so the ECU should be calibrated to suit the different voltage curve. This MAF is capable of reading up to 600hp on a factory 350Z VQ35DE MAF housing, can read higher numbers with a bigger MAF housing. 3" or Larger MAF housing is preferred. Learn More

Hitachi OEM Throttle Body (QR25DE) Fits years 02-06 - All QR25DE Engines (First Gen) 02-06 Sentra 2.5L 02-06 Altima 2.5L 02-06 Xtrail 2.5L 02-06 Frontier 2.5L SUPERIOR: Hitachi Astemo is a Tier 1 OE supplier for Electric Throttle Bodies. Performs like OE to ensure quality you can depend on, right out of the box. PERFORMANCE: New throttle position sensor technology over OE design ensures smooth idle conditions and precise air flow metering. Restores original drivability characteristics. QUALITY: Application specific gear ratios and materials provide precise control with reduced wear and tear on the electric motor. Every individual part number is extensively tested for durability and consistent accuracy as part of the design process. ASSURANCE: 100% New, never remanufactured. No product wears the Hitachi logo until it has been carefully designed, precisely manufactured, and rigorously tested. SUPPORT: Hitachi Astemo's commitment to innovation and quality are unsurpassed. Likewise, is our commitment to product support. Please check the cross reference compatibility for your vehicle using the Amazon part selection tool located above the product images. Learn More

Power Stop 11-17 Nissan Juke Front Autospecialty Brake Kit 2011 - 2013 Nissan Juke | 2014 - 2017 Nissan Juke [S; SL; SV; Nismo] Does not fit Nismo RS models Everything You Need in 1 Box Includes 2 OE Replacement brake rotors, one set of Z17 Evolution Plus Ceramic Brake Pads and Upgraded Installation Hardware Components are designed to match the OE performance of your brakes. Z17 Evolution Clean Ride ceramic formula keeps your wheels dust free. Brake pads tested to ensure noise-free braking. Rotors use G3000 castings and are 100% mill balanced for stock performance and safety. Includes all hardware necessary for a complete installation. Learn More

Power Stop 11-17 Nissan Juke Rear Autospecialty Brake Kit 2011 - 2013 Nissan Juke | 2014 - 2017 Nissan Juke [S; SL; SV; Nismo] Does not fit Nismo RS models Everything You Need in 1 Box Includes 2 OE Replacement brake rotors, one set of Z17 Evolution Plus Ceramic Brake Pads and Upgraded Installation Hardware Components are designed to match the OE performance of your brakes. Dual-Layer Rubberized Shims Z17 Evolution Clean Ride ceramic formula keeps your wheels dust and noise free Rotors use G3000 castings and are 100 percent mill balanced for stock performance and safety Includes all hardware necessary for a complete installation. Bolt-On Ready: No modifications needed to your vehicle Learn More

Cobb Ford Focus ST/RS Accessport V3 A-Pillar Mount The AP V3 A-Pillar Mount attaches to the driver's side A-Pillar. The swivel allows the driver to set the angle of the AP for optimal viewing. Installation is simple and quick. The mount uses the spaces between the panels with no need to dismantle the interior and no damage is caused by proper installation. Mounting your AP to the A-Pillar with the ProClip USA Vehicle Mount will keep your device in the perfect location. View the data displayed on your AP without taking your eyes off the road! Features Ford Accessport V3 A-Pillar Mount Focus ST 2013-2018, Focus RS 2016-2018 Includes both swivel and mount Made of high grade ABS plastic Quick and simple installation Works for LHD Only Keep your Accessport within reach while in the driver's seat Learn More

COBB Redline Carbon Fiber Cold Air Intake System Vehicle Fitment: - 2013-2018 Focus ST - 2016-2018 Focus RS If you are dreaming of freeing up the airflow and add a level of refinement under the hood of your 2013-2018 Focus ST or 2016-2018 Focus RS without any compromises, you have come to the right place! CJ Pony Parts is pleased to provide you with a brand new COBB Redline Carbon Fiber Cold Air Intake System (793150) for your 2013-2018 Focus ST or 2016-2018 Focus RS. The COBB Ford Focus ST/RS Redline Carbon Fiber Intake is a great way to dress up your engine bay while increasing engine performance at the same time! Features and Benefits: - 3k tow 2x2 Twill Carbon Fiber Construction - Large 3" piping for ideal flow - Pre-Oiled and Re-usable Dual Cone Air Filter - Black 4-ply Silicone Couplers - Black E-Coated 304 Stainless Steel Clamps - Made in the USA The carbon fiber tube and airbox lid are constructed of a 3k tow in a 2x2 twill weave pattern. Everything is held together with black 4-ply silicone couplers accompanied by black e-coated 304 stainless steel hardware. A gloss finish and bespoke Redline-specific badge keeps everything tidy under the hood. Included is a pre-oiled, dual cone, filter to increase airflow and amplify that great turbo sound. This intake is a complete factory replacement all the way to the turbo and is compatible with the original factory tune and all available COBB OTS maps. Tech Tip: To get the maximum performance out of your Focus ST or RS, pair this COBB Carbon Fiber Cold Air Intake System with a COBB Accessport V3 (P/N: AP3FOR001 and AP3FOR004). Learn More

Cobb Ford 16-18 Focus RS / 13-18 Focus ST Redline Carbon Fiber Air Scoop Fitment Information: 2013-2018 Ford Focus ST 2016-2018 Ford Focus RS This piece channels air from the large grille opening directly into the factory snorkel feeding the stock airbox. Features: 2x2 Twill Carbon Fiber Weave Debossed COBB Logo Easy Installation Installation Guide An increased amount of cooler airflow is key in making the most efficient power out of your Focus ST or Focus RS! Pulling in fresh air from the grill ensures that air entering into the intake system is as close to ambient as possible. Learn More

Cobb 13-18 Ford Focus ST Cold Air Intake Fitment Information: 2013-2018 Ford Focus ST The COBB Focus ST Intake maintains the best qualities of the factory intake while improving on the rest, it is a bold, performance driven addition to your vehicle that will add a kick to your overall driving experience. Features: 3" Mandrel Bent Aluminum Tube Powdercoated Wrinkle Black Pre-Oiled Dual Cone Air Filter 4-ply Black Silicone Couplers C.A.R.B. Certified Easy to Intermediate Installation Effort Installation Guide The COBB Focus ST Intake takes a great airbox design and makes it even better! They improved upon the factory airbox ram air ducting by including an oiled dual cone filter to increase airflow and to hear that great turbo sound. The constrained piping to the turbo is replaced with 3" mandrel bent aluminum tubing to maximize air flow and uses custom silicone couplers to fasten everything together. This is the next generation Focus ST Intake which features OEM-like fitment across all model years and an updated wrinkle black powdercoat finish. The COBB Focus ST Intake is the perfect first step towards Stage 2 power levels when paired with the COBB FMIC! Learn More