Search results for 'b13 sentra'
-
Nissan Sentra 2.5L ECU
Regular Price: $399.98
Special Price $349.98
Nissan Sentra 2.5L ECU Used/Tested ECUs for Nissan Sentra 2.5L 2002-2006 QR25DE SpecV 2.5L These can come STOCK or UpRev Flashed with a tune (NON TURBO ONLY). If your car has NATS (P8, GU, R5) the ECU WILL NOT WORK UNLESS the dealer codes the key to the new ECU or you select UPREV Flashed in the options and we turn off the security in the ECU. ECUs are tested before shipment. No returns. Learn More -
UpRev MAF GT
Regular Price: $399.98
Special Price $379.98
UpRev MAF GT The UpRev MAF GT is an upgraded sensor for Nissan Vehicles. The sensor retains the same connector and pin-out as vehicles using the following part numbers Fits 2004-2012 QR25DE Sentra / Altima and Frontier 2003-2017 350/370Z 2011-2017 Nissan Juke Nissan – 22680-7S000 Hitachi – W0133-1723137 Hitachi – MAF0031 This sensor is not a factory replacement, ECU calibration is required in order to use the UpRev GT MAF. The GT MAF voltage scale has been changed to suite higher airflow and so the ECU should be calibrated to suit the different voltage curve. This MAF is capable of reading up to 600hp on a factory 350Z VQ35DE MAF housing, can read higher numbers with a bigger MAF housing. 3" or Larger MAF housing is preferred. Learn More -
Hitachi OEM Throttle Body (QR25DE)
Regular Price: $198.99
Special Price $168.78
Hitachi OEM Throttle Body (QR25DE) Fits years 02-06 - All QR25DE Engines (First Gen) 02-06 Sentra 2.5L 02-06 Altima 2.5L 02-06 Xtrail 2.5L 02-06 Frontier 2.5L SUPERIOR: Hitachi Astemo is a Tier 1 OE supplier for Electric Throttle Bodies. Performs like OE to ensure quality you can depend on, right out of the box. PERFORMANCE: New throttle position sensor technology over OE design ensures smooth idle conditions and precise air flow metering. Restores original drivability characteristics. QUALITY: Application specific gear ratios and materials provide precise control with reduced wear and tear on the electric motor. Every individual part number is extensively tested for durability and consistent accuracy as part of the design process. ASSURANCE: 100% New, never remanufactured. No product wears the Hitachi logo until it has been carefully designed, precisely manufactured, and rigorously tested. SUPPORT: Hitachi Astemo's commitment to innovation and quality are unsurpassed. Likewise, is our commitment to product support. Please check the cross reference compatibility for your vehicle using the Amazon part selection tool located above the product images. Learn More -
Injen 2007-2012 Sentra SER V-Spec 2.5L Gloss Black Cold Air Intake
Regular Price: $400.89
Special Price $369.78
Injen 2007-2012 Sentra SER V-Spec 2.5L Gloss Black Cold Air Intake B16 2.5L QR25 ONLY - Manual and Auto The Injen SP Series Intake Systems Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. The Injen SP Series Intake System does not limit itself to just a Cold Air System or Short Ram System. The MR Technology process has its effects on both types. The Injen SP Series Intake is The World's First Tuned Intake System ... Learn More -
Injen 07-12 Nissan Sentra 2.0L Polished Cold Air Intake w/ MR Technology
Regular Price: $317.98
Special Price $291.78
Injen 07-12 Nissan Sentra 2.0L Polished Cold Air Intake w/ MR Technology B16 2.0L ONLY! Manual and Auto The Injen SP Series Intake Systems Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. The Injen SP Series Intake System does not limit itself to just a Cold Air System or Short Ram System. The MR Technology process has its effects on both types. The Injen SP Series Intake is The World's First Tuned Intake System ... Learn More -
BorgWarner EFR 6258 Turbo
Regular Price: $1,564.78
Special Price $1,199.78
Out of stock
BorgWarner EFR 6258 Turbo BorgWarner EFR 6258 is the fastest Spooling EFR Turbo.. Ideal for small engines (2.5L) in single OR twin turbo configuration, this is an excellent turbocharger for autocross, rally, drift, road racing and street driven applications. A direct plug-n-play for SR20DET, its also popular for Subaru WRX and Nissan Sentra SpecVs. The 62mm OD compressor has a 49.6mm inducer rated at 44lb/min max flow – supporting up to 440hp. This compressor wheel is versatile with very large map width for outstanding power potential, even at high boost. The low inertia 58mm Gamma-Ti turbine wheel is optimally matched for maximum response and fast spool with the FMW compressor wheel. EFR 6258 uses the smallest-sized EFR compressor housing, making fitment in the tightest engine bays possible. Ideal for use in single turbo applications for the 260-440hp range, or as twin turbo applications 500-800+hp. Ceramic Ball Bearing only, watercooling recommended but not mandatory. COMPRESSOR SPECIFICATIONS Compressor Type: Forged-Milled Wheel (FMW) Extended Tip Compressor Wheel OD (exducer): 62mm Compressor Wheel Inducer: 49.6mm Max Flow Rate: 44 lb/min Built-in BOV: All EFR compressor housings incorporate an integrated BOV. Compressor Housing: 2.5″ inlet, 2.0″ hose coupler outlet. TURBINE SPECIFICATIONS Turbine Wheel Material: Low Inertia Gamma-Ti Turbine Wheel Turbine Wheel OD: 58mm (recommended) OR 55mm Turbine Housing Material: Stainless Steel Sand Cast Housing Turbine outlet: GT-Vband (aka small 3″ vband) ~92mm OD for all EFR turbos FEATURES Dual Row Ceramic Ball Bearings – lowest friction and fastest spool/response, most extreme durability, built-in 2mm oil restrictor Watercooled Center Section – watercooling is recommended, 14mm banjo bolts Learn More -
PRE ORDER 2JR 1.5" Drop Street-Spec Circuit Lowering Springs (01-06 Sentra)
Regular Price: $179.99
Special Price $129.78
After a year of testing to refine the spring rates and ride height, 2JR introduces our own line of street performance springs. Perfect for stock shocks or pair with aftermarket shocks like KYB or Koni Yellows. Our springs are progressive rate which generates a better overall appearance while making a significant improvement in performance.
Drops 1.5" over stock, with a perfect front to rear rake. These are probably the best springs we've ever encountered for the B15. Fits all models 02-06
Spring Rates - Front = 5.5K / Rear = 5.2K or 308lbs.in / 291lbs.in
Learn More -
McLeod Tuner Series Street Tuner Clutch Altima 2002-06 2.5L Sentra 2002-06 2.5L Spec V
Regular Price: $395.78
Special Price $359.78
McLeod Tuner Series Street Tuner Clutch Altima 2002-06 2.5L Sentra 2002-06 2.5L Spec V STREET POWER- The Street Power clutch kit is the newest offering in the Supremacy Line for the Sport Compact and European Markets, it's the perfect choice for street/track applications. We recommend it for cars up to 40-50%% more power(depending on part number) perfect for street cars with moderate bolt on's. Included is a high quality matched pressure plate, high torque ceramic 6 puck disc for smooth and even engagement. Our kits are complete, they come with pilot tool and throw out bearing (where applicable). If you are looking for a clutch that's a great replacement from your stock set up, the McLeod Street Power is your best option. Supremacy by McLeod Racing. Learn More -
OEM Nissan Factory Nismo RS Clutch Kit (Juke / B17)
Regular Price: $1,279.98
Special Price $829.78
OEM Nissan Clutch Kit (Juke / B17) Application: Fits All Models Nissan Juke with MR16DDT (1.6L) Manual Fits All Models Nissan B17 Sentra SR / Nismo MR16DDT (1.6L) Manual OEM Part Numbers: 12310-3YV0A: $1,084.77 Flywheel 30100-1KCOA: $214.86 Disk 30210-1KC0C: $234.85 Pressure Plate OEM New Nissan Complete Clutch Kit. Includes Flywheel, Disk, Pressure Plate and Pressure Plate Bolts. Optional - OEM LUK Concentric Slave Unit Removed from New Nismo RS Engines. Learn More -
B15 (02-06) AEM Nissan Sentra SE-R Red Cold Air Intake
Regular Price: $399.98
Special Price $379.98
B15 (02-06) AEM Nissan Sentra SE-R Red Cold Air Intake 2.5L (02-06) Sentra Models CARB EO #: D-670-15 Our Cold Air systems are dyno-proven and tested against the competition to create more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. All AEM Cold Air systems are either 50-state legal or pending (excluding "Off Road" and "Hybrid" systems), include a lifetime DRYFLOW Synthetic air filter and come with a limited lifetime warranty. Learn More -
Stage 3 - SR / Nismo Catback + Midpipe + CAI + FMIC
Regular Price: $1,679.98
Special Price $1,498.78
Stage 3 - SR / Nismo Catback + Midpipe + CAI + FMIC Includes: 2JR Carbon Catback 2JR Midpipe w/defouler 2JR Full Cold Air Intake 2JR Full FMIC with Hard Piping Kit Big power gains / no check engine lights / retains the factory front cat / amazing sound without the rasp. Looking for the best sound, performance and quality for your 2017-2019 Nismo Sentra SR and Nismo (1.6L Turbo)? Look no further than our hand-tig welded 2.5" stainless catback with 3.5" Carbon/Blue tip. Includes a long front resonator to remove the rasp and produce that deep, clean sound you've been searching for. It also comes with 3 hard hangers for the tail section, stainless hardware and gaskets for a complete bolt-on system. Remember, the factory turbo exhaust is a mere 49mm - and highly restrictive under boost. Unless your car's potential with 2JR. 2JR Nismo Intake relocates the filter outside of the engine compartment to deliver cool air inlet temperatures. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horsepower and torque. 2JR Sprint Series FMICs are designed to be used on the street or track with no limitations in performance and to be a complete drop in kit. Kit includes all the hard piping! From the turbo to the throttle body. Complete kit! Features and Benefits: - Direct fit for the 2017-2020 Nissan Sentra B17 Turbo(SR and Nismo models) - 27" Long intercooler design optimized for maximum flow - No modification to front bumper and retains stock fog lights - Maximum cooling efficiency with minimal pressure drop - Max power gains of 19HP and 22 feet per pounds of torque - Drops intercooler outlet temperatures by 38°F - Increases core size by 138% and fin surface area by 42% All the hardware required to complete your installation is likewise included. Learn More -
Stage 2 - SR / Nismo Catback + Midpipe + Cold Air Intake
Regular Price: $929.98
Special Price $879.98
Stage 2 - SR / Nismo Catback + Midpipe + Cold Air Intake Includes: 2JR Carbon Catback 2JR Midpipe w/defouler 2JR Full Cold Air Intake Big power gains / no check engine lights / retains the factory front cat / amazing sound without the rasp. Looking for the best sound, performance and quality for your 2017-2019 Nismo Sentra SR and Nismo (1.6L Turbo)? Look no further than our hand-tig welded 2.5" stainless catback with 3.5" Carbon/Blue tip. Includes a long front resonator to remove the rasp and produce that deep, clean sound you've been searching for. It also comes with 3 hard hangers for the tail section, stainless hardware and gaskets for a complete bolt-on system. Remember, the factory turbo exhaust is a mere 49mm - and highly restrictive under boost. Unless your car's potential with 2JR. 2JR Nismo Intake relocates the filter outside of the engine compartment to deliver cool air inlet temperatures. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horsepower and torque. Learn More -
Stage 1 - SR Turbo / Nismo 304 Stainless Catback + Midpipe
Regular Price: $798.89
Special Price $729.78
Stage 1 - SR Turbo / Nismo 304 Stainless Catback + Midpipe Includes: 2JR Carbon Catback 2JR Midpipe w/defouler Big power gains / no check engine lights / retains the factory front cat / amazing sound without the rasp. Looking for the best sound, performance and quality for your 2017-2019 Nismo Sentra SR and Nismo (1.6L Turbo) and 1.8L Non Turbo. Look no further than our hand-tig welded 2.5" stainless catback with 3.5" Carbon/Blue tip. Includes a long front resonator to remove the rasp and produce that deep, clean sound you've been searching for. It also comes with 3 hard hangers for the tail section, stainless hardware and gaskets for a complete bolt-on system. Includes Remember, the factory turbo exhaust is a mere 49mm - and highly restrictive under boost. Unless your car's potential with 2JR. Sound Clip Learn More -
B16 Garrett 60 Trim Turbo Kit (07-12) 450hp
Regular Price: $6,298.78
Special Price $4,698.00
B16 Garrett 60 Trim Turbo Kit (07-12) 450hp Fits: 07-12 Sentra 2.5L (SE-R and SpecV) Gains: Up to 450whp 2JR is the only B16 Turbo Kit that includes the 02 Sensor ports - before the turbo, in their respective bank - for perfect driveability and tuning. No other kit offers this option. The ECU must see Bank 1 and 2 separately. Kit Includes: Garrett 60 Trim Stage 3 Journal Bearing Turbo Turbosmart WG38 Gen V Ultragate 38 7psi Blue Turbosmart BOV Vee Port Pro Bosch 850cc Injectors Stainless Downpipe Vibrant Hardware Same Side Intercooler Turbosmart Boost Gauge Wastegate spring set to 7psi for 320whp out of the box. Higher rate springs can be spec'd for up to 450hp. Contact us after purchase. NOTES: You will need to move your battery to the trunk and lower the ECU (see photo). You will also need to remove your tow hook from the crash bar to fit the FMIC. Standard kit comes with an open dump for the WG. Options include powdercoated piping / closed dump / larger injectors. You may need to relocate/remove foglights. Kit will need to be tuned after install. Contact your local tuner or 2J Learn More -
Prothane 02-06 Nissan Sentra SE-R Rear Motor Mount Insert - Red
Regular Price: $45.97
Special Price $42.69
Prothane 02-06 Nissan Sentra SE-R Rear Motor Mount Insert - Red Serves as an upgrade to your old, worn-out mounts Precision-formed for solid fit Made with sturdy, superior-quality polyurethane that far outperforms rubber Provides ideal stiffness and encourages better handling and performance **You must press out your old mount and press in the Prothane** Mount is on the Rear of the crossmember Learn More -
Prothane 02-06 Nissan Sentra SE-R Front Motor Mount Insert - Red
Regular Price: $39.63
Special Price $34.77
Prothane 02-06 Nissan Sentra SE-R Front Motor Mount Insert - Red Serves as an upgrade to your old, worn-out mounts Precision-formed for solid fit Made with sturdy, superior-quality polyurethane that far outperforms rubber Provides ideal stiffness and encourages better handling and performance **You must press out your old mount and press in the Prothane** Mount is on the front of the crossmember Learn More -
SPAL 861 CFM 12in Fan - Pull - B15 Sentra
Regular Price: $92.87
Special Price $79.87
SPAL 861 CFM 12in Fan - Pull - B15 Sentra Hands down, the best fan upgrade for your B15. Made in Italy. Clears the medusa header and provides a significant upgrade over the Mishi Fans. Will fit on Mishi Fan shrouds or you can add the shroud in the options below. Sold as EACH. Learn More -
Fidanza 2007+ Nissan Sentra Spec-V Short Throw Shifter (B16)
Regular Price: $129.96
Special Price $124.16
Fidanza 2007+ Nissan Sentra Spec-V Short Throw Shifter (B16) Fidanza Performance offers a large line of short throw shifters for both Import and Domestic applications. Fidanzas short shift kits are made precisely with 6061 aluminum and hardened steel. Many Fidanza shifters include all necessary hardware for installation, depending on application. Fits all B16 SpecVs from 2007-2012 Learn More -
MagnaFlow 02-06 Nisssan Altima/Sentra V4 2.5L Manifold Direct Fit Catalytic Converter
Regular Price: $1,102.98
Special Price $1,058.96
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 50805. With features including free-flowing mandrel-bent tubing and highly corrosion resistant, stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2002-2006 Nissan Altima and 2002-2006 Nissan Sentra, this direct-fit catalytic converter also interchanges with OE parts 14002-9J310, 14002-9J30B, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems. Learn More -
JE RTR High Comp Piston Set - QR25 (10.8-1)
Regular Price: $821.98
Special Price $782.19
JE High Comp Piston Set - QR25 Fits ALL QR25s / Bore 89.0mm, Stroke 100mm, Rod Length 143mm, Flat Top -0.6cc, Grams 338, Set of 4 Compression Ratio: 10.8:1 JE Pistons are machined by the most advanced CNC machining technologies available. JE forged Pistons are trusted by racers and engine builds for dependability. JE Pistons are compatible with boost and nitrous. Crown requires no deburring or preparation 2618 T6 high tensile forged aluminum JE designs are specifically engineered for extreme applications up to, and including, professional competition. In this environment, the higher compression ratios, highest boost, or heavy nitrous usage necessitate the higher tensile strength 2618 aluminum alloy. Crown design features smooth flowing radii for excellent flame travel. 1.0 x 1.2 x 2.8mm ring widths. .787 x 2.250 straight wall carbon steel wrist pin provided. Pin fitting, wire locks and rings included Compression ratio calculated at .020" deck clearance with .025" thick head gasket Learn More