Search results for 'b15'
-
-
PRE ORDER 2JR 1.5" Drop Street-Spec Circuit Lowering Springs (01-06 Sentra)
Regular Price: $179.99
Special Price $129.78
After a year of testing to refine the spring rates and ride height, 2JR introduces our own line of street performance springs. Perfect for stock shocks or pair with aftermarket shocks like KYB or Koni Yellows. Our springs are progressive rate which generates a better overall appearance while making a significant improvement in performance.
Drops 1.5" over stock, with a perfect front to rear rake. These are probably the best springs we've ever encountered for the B15. Fits all models 02-06
Spring Rates - Front = 5.5K / Rear = 5.2K or 308lbs.in / 291lbs.in
Learn More -
PRE ORDER B15 V2 Long Runner Medusa UEL Header
Through continuous testing 2JR has improved the already dominate Medusa header with performance upgrades. Port changes to Oval Head Port Matched Flanges for a perfect seal - Longer runners by 4" over the V1 Medusa produce a higher mid-high rpm HP performance. And stepped runner design from 1.7" to 1.9" from the Spyder header help improve scavenging and broaden the torque curve. The V2 Medusa is UEL (unequal length) and provides a "boxer-like" rumble at idle and under throttle. Comes with Billet Aluminum Alternator Clearance Bracket. You will need one slim fan (included) to run this header because of its size and runner design. It will bolt to the OEM midpipe or the 2JR 2.5 or 3" midpipe. You can remove the fan and ACB option and save an additional $74! Make sure you have these parts already. For a quick install - select the 2JR Plug and Play Fan Wire kit To install the fan - the factory clip has 4 wires, the top two are position (looking at where the clip is) and the bottom two are neg. Connect the blue fan wire to the top two + pos wires and the black 2J fan wire to the bottom two - wires. Fits all 02-06 Sentras and Altimas - qr25de only. Learn More -
QR25 (B15) Pressure Plate Bolt/Washer Set
Regular Price: $36.99
Special Price $26.78
QR25 (B15) Pressure Plate Bolt/Washer Set OEM Pressure Plate Bolts/Washers for the QR25 OEM and aftermarket clutch kits. It is recommended you replace your OEM pressure plate bolts when doing a clutch replacement. TQ Spec is 24ft/lbs Learn More -
B15 (02-06) AEM Nissan Sentra SE-R Red Cold Air Intake
Regular Price: $399.98
Special Price $379.98
B15 (02-06) AEM Nissan Sentra SE-R Red Cold Air Intake 2.5L (02-06) Sentra Models CARB EO #: D-670-15 Our Cold Air systems are dyno-proven and tested against the competition to create more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. All AEM Cold Air systems are either 50-state legal or pending (excluding "Off Road" and "Hybrid" systems), include a lifetime DRYFLOW Synthetic air filter and come with a limited lifetime warranty. Learn More -
B15 Coil Pack Harness (4)
Regular Price: $46.98
Special Price $39.17
B15 Coil Pack Harness (4) Set of 4 Coil Pack Harness for the B15. May fit other nissan models, check your application to ensure fitment. Specs: B15 2002-2006 QR25DE Learn More -
SPAL 861 CFM 12in Fan - Pull - B15 Sentra
Regular Price: $92.87
Special Price $79.87
SPAL 861 CFM 12in Fan - Pull - B15 Sentra Hands down, the best fan upgrade for your B15. Made in Italy. Clears the medusa header and provides a significant upgrade over the Mishi Fans. Will fit on Mishi Fan shrouds or you can add the shroud in the options below. Sold as EACH. Learn More -
Tanabe Sustec Front Strut Tower Bar Juke (Gen 1)
Regular Price: $198.10
Special Price $188.78
Tanabe Sustec Front Strut Tower Bar Juke (Gen 1) Fits all 2011-2014 models and all RS years The Tanabe Strut Tower Bar is arguable one of the least expensive upgrades that can provide a very high degree of benefit that is felt immediately after installing. Often one of the first modifications performed on a vehicle, the strut tower brace improves handling and stability of a vehicle. The Sustec Tower Bar has been very popular due to its low price and high functionality. By connecting the strut towers, and creating a balance, the shocks are prevented from independently moving and causing small changes in suspension geometry. Learn More -
B15 Brembo StopTech Rotor Set (Front/Rear)
Regular Price: $729.98
Special Price $696.78
Fits all B15s with the Brembo Front and Rear brake kit (12" front / 11" Rear). Incs both front and rear pairs (4 rotors) Drilled and Slotted Front - 127.42083 / Rear - 127.42082 Optional: Semi Metallic / Hawk Pad Sets / Fluid / Stop Tech Brake Lines StopTech was founded in 1999 with a principal vision to manufacture high performance brake components and systems for street and track use. With racing in its DNA and a mission to become the leading manufacturer of high performance brake components and systems. Engineered to dramatically improve overall braking performance, the company is now a leader in Balanced Brake Upgrades™ for production cars with a strong presence in the SPEED World Challenge® Touring Car Series and the Grand-Am® Cup as well. Learn More -
Sentra 04-06 B15 2.5L Hi-Power 3" Cold Air Intake (CAI)
Regular Price: $249.98
Special Price $199.99
This is the highest HP producing intake we've ever tested. Over 8 hp more than a Nismo Cold Air intake!!. Makes Over 15 than the stock box. Refer to the dyno for Nismo vs 2JR. Can be used for supercharged or turbo applications if the customer chooses. Has a full 3" MAF section with the appropriate MAF spacing in the piping to prevent any unwanted air disturbance which would cause MAF spikes. Nissan MAFs are require a specific amount of straight pipe before and after the MAF for optimum performance. Our intake is a full mandrel bent, completely seamless, power section cold air intake. The MAF is hidden on the backside and it has just one coupler, at the TB. It fits around your Stock battery. Can be shortened by the owner for a short ram setup. Power, design and function. And for less than any other cold air intake on the market. This is the highest HP producing intake for the Spec-V. It also sounds incredible at wide open throttle! Intake includes 1. 1 piece seamless high polished piping with integrated MAF housing / power section 2. 1 dry hi-flow filter 3. 1 coupler assy with band clamps 4. 1 VC to CAI hose 5. 1 round bushing for securing the intake (w hardware) Colors add 2-3 weeks to shipping time Learn More -
Sentra 02-03 B15 2.5L Hi-Power 3" Cold Air Intake (CAI)
Regular Price: $249.98
Special Price $199.99
This is the highest HP producing intake we've ever tested. Over 8 hp more than a Nismo Cold Air intake!!. Makes Over 15 than the stock box. Refer to the dyno for Nismo vs 2JR. Can be used for supercharged or turbo applications if the customer chooses. Has a full 3" MAF section with the appropriate MAF spacing in the piping to prevent any unwanted air disturbance which would cause MAF spikes. Nissan MAFs are require a specific amount of straight pipe before and after the MAF for optimum performance. Our intake is a full mandrel bent, completely seamless, power section cold air intake. The MAF is hidden on the backside and it has just one coupler, at the TB. It fits around your Stock battery. Can be shortened by the owner for a short ram setup. Power, design and function. And for less than any other cold air intake on the market. This is the highest HP producing intake for the Spec-V. It also sounds incredible at wide open throttle! Intake includes 1. 1 piece seamless high polished piping with integrated MAF housing / power section 2. 1 dry hi-flow filter 3. 1 coupler assy with band clamps 4. 1 VC to CAI hose 5. 1 round bushing for securing the intake (w hardware) Learn More -
B15 Garrett 60 Trim Turbo Kit (02-06) 450hp
Regular Price: $5,699.00
Special Price $3,998.97
Garrett 60 Trim Turbo Kit (02-06) Fits: 02-06 Sentra 2.5L (SE-R and SpecV) Gains: Up to 450whp Kit Includes: Garrett 60 Trim Stage 3 Journal Bearing Turbo Turbosmart WG38 Gen V Ultragate 38 7psi Blue Turbosmart BOV Vee Port Pro - Blue Bosch 850cc Injectors Stainless Downpipe Vibrant Hardware/Lines Treadstone TR8 Intercooler Turbosmart Boost Gauge Wastegate spring set to 7psi for 290whp out of the box. Higher rate springs can be spec'd for up to 450hp. Contact us after purchase. NOTES: You will need to move both fans to the front of the condensor/rad - slim fans required. Kit will fit larger radiators like Mishi without any mod. Standard kit comes with an open dump for the WG. Options include powdercoated piping / closed dump / larger injectors. You may need to relocate/remove foglights. Kit will need to be tuned after install. Contact your local tuner or 2J Learn More -
*Limited* Carbon Fiber V2 High Performance Twin Tip Catback 3"
Regular Price: $899.00
Special Price $729.98
*Limited* Carbon Fiber V2 High Performance Twin Tip Catback The V2 High Performance Catback for the 02-06 Sentra SE-R is now available. Handmade using the highest quality 3" Stainless Steel and Tig welded for long life and amazing looks. Our V2 Catback exhaust system has the largest rear muffler we could stuff under the B15 chassis. Pair this with the venerable Medusa Header and Resonated 3" stainless midpipe for the ultimate in performance, power and looks. Materials: Vibrant Rear Muffler w/ 2JR Carbon Resonated Tips Magnaflow Center Resonator Includes 3 gaskets / hardware kit. Made for your B15 by the folks that race their B15. Learn More -
B15 2.5L Hi-Power 3" Cold Air Intake (CAI)
Regular Price: $299.99
Special Price $149.00
This is the highest HP producing intake we've ever tested. Over 8 hp more than a Nismo Cold Air intake!!. Makes Over 15 than the stock box. Refer to the dyno for Nismo vs 2JR. Can be used for supercharged or turbo applications if the customer chooses. Has a full 3" MAF section with the appropriate MAF spacing in the piping to prevent any unwanted air disturbance which would cause MAF spikes. Nissan MAFs are require a specific amount of straight pipe before and after the MAF for optimum performance. Power, design and function. And for less than any other cold air intake on the market. This is the highest HP producing intake for the Spec-V. It also sounds incredible at wide open throttle! Intake includes 1. 1 piece seamless high polished piping with integrated MAF housing / power section 2. 1 dry hi-flow filter 3. 1 coupler assy with band clamps 4. 1 VC to CAI hose 5. 1 round bushing for securing the intake (w hardware) Learn More -
QR25 Upper Oil Pan - Turbo Drain
Regular Price: $299.99
Special Price $279.89
QR25 Upper Oil Pan - Turbo Drain We now offer a new OEM upper oil pan for the QR25 with a drilled, tapped and tig welded 10an oil drain, Inc a block off cap if you're not turbo yet. No more leaks. Approx 1-2 weeks from date order is placed. Subject to parts availability from Nissan. Pan's do not include baffle plate. They are as shown in the photo. You can also send in your pan for this service. The cost is $135 and includes the fittings. Shipping costs paid when you check out will be used to return your pan. Ship to the address below with your order receipt in the box. OEM B15 Pan: Nissan 11110-3Z000 (2002-2006) OEM B16 Pan: Nissan 11110-ET80A (2007-2012) < new OEM pan is +300 from Nissan Ship to: 2JRacing 1685 Redi Rd Cumming GA 30040 Learn More -
2JR Donut Gasket
Regular Price: $24.80
Special Price $22.45
2JR Donut Gasket We offer different sizes of the donut gasket for the following parts B15 Spyder Header B15 Medusa Header E210 Header E210 Midpipe GR Corolla Midpipe Sold as EACH Learn More -
Sentra 2.5L Denso Oxygen Sensors (Pair/Single)
Sentra 2.5L Denso Oxygen Sensors (Pair/Single) Select Year 02 through 06. Then Upstream / Downstream or Both Superior Design Maximizes Engine Performance and Fuel Efficiency DENSO's light duty oxygen sensor started to appear on vehicles with the development of fuel injection systems. The basic job of the sensor is to monitor the air fuel mixture under idle, moderate acceleration and cruise conditions. Under heavy acceleration the oxygen sensor goes into "open loop," which basically means that the engine management computer system ignores the oxygen sensor. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio. Learn More -
B15 to B16 Throttle Body Spacer - Star
Regular Price: $99.49
Special Price $79.89
B15 to B16 Throttle Body Spacer - Star Allows you to mount a B15 Throttle Body on a Gen2 Composite OEM Plenum (B16 SpecV / Altima / Rogue). Includes the Stainless Hardware. Learn More -
CXRacing Coilovers for B15 Sentra
Regular Price: $849.78
Special Price $729.78
CXRacing Damper CoilOver Suspension Kit for 2000-2006 NISSAN Sentra B15 Mono-Tube, Top Mount, 32 Step Damper & Ride Height Adjustable Street Sport Spring Rate: Front 8kg(447 lb/in) / Rear 6kg(335 lb/in) Optional Swift Springs Available One year Warranty* We offer one year warranty for manufacturing defective parts. Professional Installation is a must for this warranty, without a professional installation receipt, warranty is voided. Bad part must be returned for inspection for exchange new part. Highlights: -32 Step Damper Adjustable -Precise control damp valve, Operates smoothly on all road surfaces -Expansion/Suppression of shock adjustment -Height and low adjustable, Superb road holding qualities and great looks -Single Cylinder, or Mono-Tube Design, with Larger cylinder and piston design, advances driving stability and dexterity -ARTC Durability Test & Salt Spray Fog Test, Guaranteed with Top Quality Material and Long Durability Learn More -
PREORDER B15 QR Stainless Flex Resonated Midpipe 2.5"
Regular Price: $299.98
Special Price $239.78
Limited Run of Resonated Midpipes for the QR B15 Chassis with a flex section are now available in 2.5". Made from 304 Stainless Steel and mandrel bent to ensure the highest flow then paired with a stainless flex section and resonator to reduce rasp and noise. Will fit on the OEM and aftermarket exhausts as well as 2JR and aftermarket 4-1 headers. Includes rear gasket, bolts and nuts. You can add an optional OEM donut gasket or reuse your existing one. Made by 2JR and hand welded to perfection. We use only the best exhaust components for a complete full stainless system. Stainless perforated core for extra long life. The resonator can be subbed out for a cat in the options. This will add about 1 week production time. Sounds absolutely AMAZING