Search results for: 'rev'

Nissan Sentra 2.5L ECU

Regular Price: $399.98

Special Price $349.98

Nissan Sentra 2.5L ECU Used/Tested ECUs for Nissan Sentra 2.5L 2002-2006 QR25DE SpecV 2.5L These can come STOCK or UpRev Flashed with a tune (NON TURBO ONLY). If your car has NATS (P8, GU, R5) the ECU WILL NOT WORK UNLESS the dealer codes the key to the new ECU or you select UPREV Flashed in the options and we turn off the security in the ECU. ECUs are tested before shipment. No returns. Learn More

UpRev MAF GT

Regular Price: $399.98

Special Price $379.98

UpRev MAF GT The UpRev MAF GT is an upgraded sensor for Nissan Vehicles. The sensor retains the same connector and pin-out as vehicles using the following part numbers Fits 2004-2012 QR25DE Sentra / Altima and Frontier 2003-2017 350/370Z 2011-2017 Nissan Juke Nissan – 22680-7S000 Hitachi – W0133-1723137 Hitachi – MAF0031 This sensor is not a factory replacement, ECU calibration is required in order to use the UpRev GT MAF. The GT MAF voltage scale has been changed to suite higher airflow and so the ECU should be calibrated to suit the different voltage curve. This MAF is capable of reading up to 600hp on a factory 350Z VQ35DE MAF housing, can read higher numbers with a bigger MAF housing. 3" or Larger MAF housing is preferred. Learn More

2JR Titanium Greddy Turndown Catback (Hatch)

Regular Price: $1,249.98

Special Price $929.78

2JR Titanium Greddy Turndown Catback (Hatch) Greddy Turndown Titanium Catback for your E210 Hatch are now available for custom order! Built to your specs, hand tig welded only using the highest quality stainless piping and flanges. Greddy Revolution Muffler. You can choose which side you want the exhaust to exit on - Driver or Pass. Add a resonator in the options to tone things down a bit. And pair it up with the 2JR Midpipe for the most aggressive performance and sound or the OEM midpipe. Options for style include: OEM Bumper with the Chrome Trim Removed OEM Bumper with Diffuser 2JR Bash Bar with "JDM Angle" on the Greddy Learn More

Ford Focus ST Stage 1 Power Package w/V3

Regular Price: $750.00

Special Price $745.00

Ford Focus ST Stage 1 Power Package w/V3 The Accessport V3 is the world's best selling, most flexible ECU upgrade solution for Ford. Unlock power hidden within the vehicle by replacing conservative factory settings with more aggressive calibrations. Upgrade forever with off-the-shelf (OTS) calibrations for most bolt-on modifications. It's the last engine management solution you'll ever need. COBB High Flow Filters are designed to permit very high flow rates, minimize restriction, maximize filtration and provide a long life filter. Using propriety Woven cotton and metal mesh with a precision molded rubber base, the COBB High Flow Filter ensures that only clean air passes into your engine for maximum efficiency. Why not treat your car to fresh air with a COBB High Flow Filter and let it reward you with increased power, fuel economy and money savings! The COBB Rear Motor Mount is the best way to minimize engine movement, improve traction, and reduce wheel hop without major impact to NVH. Typical bushing designs can rattle your teeth out at idle or during throttle input. The COBB RMM utilizes unique voids custom molded into the 85A durometer bushing to absorb vibrations, but still reduce engine movement to aid getting all the power to the ground. The beautifully machined 6061 billet aluminum mount with zinc hardware will make you sad you have to hide it under your car, but you will be grinning at every stop light! Learn More

Cobb Ford Focus ST Sound Symposer Delete - Stealth Black

Regular Price: $55.00

Special Price $53.78

Cobb Ford Focus ST Sound Symposer Delete - Stealth Black The COBB Sound Symposer Delete kit for the 2013+ Ford Focus ST is a quick and easy solution for not only deleting your sound symposer to allow you to truly hear your car but also adds an easily accessible boost source for future modifications. Features Ford Focus ST Sound Symposer Delete 6061 Aluminum Construction Black Anodized Finish Laser Etched COBB Logo Easily Reversed Back to Stock Uses Factory Hardware Learn More

Cobb 07-13 Mazdaspeed3 / 13-18 Ford Focus ST Rear Motor Mount

Regular Price: $180.00

Special Price $170.00

Cobb 07-13 Mazdaspeed3 / 13-18 Ford Focus ST Rear Motor Mount Description The COBB Rear Motor Mount is the best way to minimize engine movement, improve traction, and reduce wheel hop, all without major impact to Noise, Vibration, or Harshness (NVH). Typical bushing designs can rattle your teeth out at idle or during throttle input. This improved version of the COBB RMM minimizes NVH over the previous design caused by resonance. Its 85A durometer bushing absorbs more vibration and further reduces engine movement to aid getting all the power to the ground. The beautifully machined 6061 billet aluminum mount with zinc hardware will make you sad you have to hide it under your car. Learn More

Revel VLS 52mm 50-300 Deg F Dual Intercooler Temperature Gauge

Regular Price: $288.98

Special Price $259.98

REVEL VLS Dual Temp Intercooler Gauge 52mm Universal This is the Revel VLS Dual Temperature Intercooler Gauge. This gauge displays both the incoming air charge and the outgoing air charge to determine how effective your intercooler is at operation. For those of you who are new to Revel, they are Tanabe's brand of exclusive gauges designed to provide fast and accurate readings. 52mm diameter gauge (2 1/16 in.) Monitor both enter & exit temperatures 50 ºF to 300 ºF readings Digital OLED display 14 LED outer ring per side Air temperature sensors included (3/8 NPT thread pitch) Mounting kit included Requires weld-in bung (not included) Learn More

2JR 2015+ Focus ST Cowl Induction Intake

Regular Price: $349.99

Special Price $249.98

WE KNOW IT'S A LOT - BUT PLEASE READ BEFORE ORDERING! Template for the cowl cutout - use only as a reference https://1drv.ms/u/s!AjQkUN52fS1SkYsxogJlFVCW9jLMrw Check out the full install of the 2J Racing cowl induction intake for the Focus St here: https://youtu.be/MtipNgHJUX0 Check out the complete unboxing of the NEW 2J Racing cowl induction intake for the Focus ST and RS here: https://youtu.be/zhqUlagPoRI Check out the Comparison between the NEW 2J Racing cowl induction intake and my old depo intake here: https://youtu.be/GoTbfZnQ3EI 2JR introduces the world's first and only cowl induction intake for your Focus ST. Most intakes place the air filter behind the stock fans to pull heated air directly into the engine (after being heated again by the compression of the turbo). 2JR places the filter inside the cowl, where it only receives ambient cold air from beneath the windshield - in a very high pressure area (another benefit). NOTE - this intake IS LOUD. To us tho, it sounds amazing. Please refer to the "production photos" listed to the left of the final version of the intake. You will lose your sound symposer - you do not need a block off plate (you can just remove the tube). The 2JR Cowl intake does include the provision for the EVAP hardline. Its completely plug and play - the OEM hardline clips in to our machined fitting - we have an extension hose that connects to the cowl intake. Same for the IAT sensor - instead of the silly grommet ours is a machined fitting the sensor rotates into - just like stock. So it'll never come lose or leak. - Install time - 2 hours. A tune is not required. - In testing we saw ambient or just a deg or two below ambient during cruising and slight increases under heavy load. - To install you will need to cut the lower plastic housing under the cowl (very easy) and the upper cowl vent panel (we will provide a template for the vent panel) - you will also need to extend your IAT wires (2 of them) by 36" or purchase the optional JMS IAT Extension. All other hoses, clamps and K&N Air Filter are included in the kit. - Made in the USA for perfect fitment and quality. NOTE: The intake filter sits suspended in the cowl (not resting on the floor). The was done to prevent any water from being pulled in the intake that may build up on the cowl floor. We do recommend the optional KN filter sock to help keep the filter extra dry - as the piping turns down very close the the plastic upper cowl seal at the windshield. For added security you could trim the upper cowl to act as a bit of flashing to help offset any water intrusion. In testing, we didn't incur any issues during heavy rains - but you should always maintain the highest precaution against this occurring in your neck of the woods. FINAL NOTE: JMS made for us the IAT extension harness. If you dont want to add 36" to your stock IAT harness (2 or 4 wires need to be extended) add this JMS harness in the options. Makes for a painless install. We also recommend the KN Dry filter Sock to help keep it dry. Learn More

(Hatchback) Seibon Corolla Hatchback MB-Style Carbon Fiber Front Lip

Regular Price: $841.00

Special Price $789.78

(Hatchback) Seibon Corolla Hatchback MB-Style Carbon Fiber Front Lip Fits 19+ Models / Hatchback MB-Style Carbon Fiber Front Lip - Ships Truck Freight Direct from Seibon TO CHECK OUT SHIPPING: Shipping is $290 Flat Rate to any of the 48 States. Select the truck freight option below, then $9.89 at checkout. Shipping times are 2-3 weeks for delivery. ONLY SHIPS TO LOWER 48 STATES. NO INTERNATIONAL SHIPMENTS. Disclaimer: Seibon packs all products carefully to prevent damage during shipping. However, damage may still occur occasionally. Buyer must inspect the packaging and the products carefully upon receiving them, then accept the shipment and notate any damages and irregularities, such as crushed, torn, punctured, or broken parts on both the packaging and the product, on the freight bill or receipt at the driver's presence. Buyer must retain all cartons, packing materials, and damaged products for the carrier's damage inspector to inspect. Do not refuse shipment or return it without approval, because the buyer's right to make a damage claim may be denied. A signed receipt without any notation indemnifies the carrier as well as Seibon from any further damage claims. Discovery of damages after a clear delivery becomes the responsibility of the customer. All damages must be notified to carrier and Seibon within 24 hours. In cases of damage with proper notation on receipt, the carrier will determine whether to pay for repair cost or replacement value of the damaged goods after damage inspection. Replacement value is the amount the buyer paid to the distributor and is not negotiable. All disputes about the settlement amount should be addressed with the carrier. Seibon, under no circumstances, shall be liable for the damaged product or for subsequent settlement of the claim with the carrier. Learn More

(Hatchback) Seibon Corolla OP-Style Carbon Fiber Rear Spoiler

Regular Price: $654.00

Special Price $599.78

(Hatchback) Seibon Corolla OP-Style Carbon Fiber Rear Spoiler Fits 19+ Models / Hatchback OP-Style Carbon Fiber Rear Spoiler - Ships Truck Freight Direct from Seibon TO CHECK OUT SHIPPING: Shipping is $170 Flat Rate to any of the 48 States. Select the truck freight option below, then $9.89 at checkout. Shipping times are 2-3 weeks for delivery. ONLY SHIPS TO LOWER 48 STATES. NO INTERNATIONAL SHIPPING. Disclaimer: Seibon packs all products carefully to prevent damage during shipping. However, damage may still occur occasionally. Buyer must inspect the packaging and the products carefully upon receiving them, then accept the shipment and notate any damages and irregularities, such as crushed, torn, punctured, or broken parts on both the packaging and the product, on the freight bill or receipt at the driver's presence. Buyer must retain all cartons, packing materials, and damaged products for the carrier's damage inspector to inspect. Do not refuse shipment or return it without approval, because the buyer's right to make a damage claim may be denied. A signed receipt without any notation indemnifies the carrier as well as Seibon from any further damage claims. Discovery of damages after a clear delivery becomes the responsibility of the customer. All damages must be notified to carrier and Seibon within 24 hours. In cases of damage with proper notation on receipt, the carrier will determine whether to pay for repair cost or replacement value of the damaged goods after damage inspection. Replacement value is the amount the buyer paid to the distributor and is not negotiable. All disputes about the settlement amount should be addressed with the carrier. Seibon, under no circumstances, shall be liable for the damaged product or for subsequent settlement of the claim with the carrier. Learn More

Seibon Corolla TS-Style Carbon Fiber Hood

Regular Price: $1,088.00

Special Price $979.78

Seibon Corolla TS-Style Carbon Fiber Hood Fits 19+ Models / Hatchback and Sedan TS-Style Carbon Fiber Hood - Hood Pins are Recommended - Ships Truck Freight Direct from Seibon TO CHECK OUT SHIPPING: Shipping is $335 Flat Rate to any of the 48 States. Select the truck freight option below, then $9.89 at checkout. Shipping times are 2-3 weeks for delivery. ONLY SHIPS TO LOWER 48 STATES. NO INTERNATIONAL SHIPMENTS. Disclaimer: Seibon packs all products carefully to prevent damage during shipping. However, damage may still occur occasionally. Buyer must inspect the packaging and the products carefully upon receiving them, then accept the shipment and notate any damages and irregularities, such as crushed, torn, punctured, or broken parts on both the packaging and the product, on the freight bill or receipt at the driver's presence. Buyer must retain all cartons, packing materials, and damaged products for the carrier's damage inspector to inspect. Do not refuse shipment or return it without approval, because the buyer's right to make a damage claim may be denied. A signed receipt without any notation indemnifies the carrier as well as Seibon from any further damage claims. Discovery of damages after a clear delivery becomes the responsibility of the customer. All damages must be notified to carrier and Seibon within 24 hours. In cases of damage with proper notation on receipt, the carrier will determine whether to pay for repair cost or replacement value of the damaged goods after damage inspection. Replacement value is the amount the buyer paid to the distributor and is not negotiable. All disputes about the settlement amount should be addressed with the carrier. Seibon, under no circumstances, shall be liable for the damaged product or for subsequent settlement of the claim with the carrier. Learn More

Seibon Corolla OEM Carbon Fiber Hood

Regular Price: $994.50

Special Price $869.78

Seibon Corolla OEM Carbon Fiber Hood Fits 19+ Models / Hatchback and Sedan OEM Style CF Hood - Hood Pins are Recommended - Ships Truck Freight Direct from Seibon TO CHECK OUT SHIPPING: Shipping is $335 Flat Rate to any of the 48 States. Select the truck freight option below, then $9.89 at checkout. Shipping times are 2-3 weeks for delivery. ONLY SHIPS TO LOWER 48 STATES. NO INTERNATIONAL SHIPPING. Disclaimer: Seibon packs all products carefully to prevent damage during shipping. However, damage may still occur occasionally. Buyer must inspect the packaging and the products carefully upon receiving them, then accept the shipment and notate any damages and irregularities, such as crushed, torn, punctured, or broken parts on both the packaging and the product, on the freight bill or receipt at the driver's presence. Buyer must retain all cartons, packing materials, and damaged products for the carrier's damage inspector to inspect. Do not refuse shipment or return it without approval, because the buyer's right to make a damage claim may be denied. A signed receipt without any notation indemnifies the carrier as well as Seibon from any further damage claims. Discovery of damages after a clear delivery becomes the responsibility of the customer. All damages must be notified to carrier and Seibon within 24 hours. In cases of damage with proper notation on receipt, the carrier will determine whether to pay for repair cost or replacement value of the damaged goods after damage inspection. Replacement value is the amount the buyer paid to the distributor and is not negotiable. All disputes about the settlement amount should be addressed with the carrier. Seibon, under no circumstances, shall be liable for the damaged product or for subsequent settlement of the claim with the carrier. Learn More

Cusco Toyota GR Yaris/Corolla AWD Adjustable Rear Upper Arm Set

Regular Price: $552.80

Special Price $472.98

Cusco 2021+ Toyota GR Yaris/Corolla AWD Adjustable Rear Upper Arm Set Specifications: Manufacturer: Cusco Japan Position: Rear Camber Adjustment Range: +10 - 10mm The Cusco Upper Camber Arms will allow the adjustment of the cars camber angle. This is extremely important once the vehicle has been lowered. By adjusting the camber, improved tire contact with the road is exhibited which results in better handling and even tire wear. They are designed to work with stock suspension or nearly every aftermarket system available. Why do you need this product: Provides proper camber angle and improves car handling. Prevents irregular tire wear on lowered car, holds perfect flat tires surface to the asphalt during hard cornering improving traction. Perfect alignement results in better handling. An improved alignment adjustment is possible when fitted along with CUSCO's adjustable rear toe control rods. Perfectly crafted Japanese made product. Learn More

Cusco Toyota GR Yaris/Corolla AWD Adjustable Rear Lower(Front Side) Arm Set

Regular Price: $420.98

Special Price $376.87

Cusco 2021+ Toyota GR Yaris/Corolla AWD Adjustable Rear Lower(Front Side) Arm Set Manufacturer: Cusco Japan Position: Rear Camber Adjustment Range: +10 - 10mm The Cusco Adjustable rear lower arms will allow the adjustment of the cars camber angle. This is extremely important once the vehicle has been lowered. By adjusting the camber, improved tire contact with the road is exhibited which results in better handling and even tire wear. They are designed to work with stock suspension or nearly every aftermarket system available. Why do you need this product: Provides proper camber angle and improves car handling. Prevents irregular tire wear on lowered car, holds perfect flat tires surface to the asphalt during hard cornering improving traction. Perfect alignement results in better handling. An improved alignment adjustment is possible when fitted along with CUSCO's adjustable rear toe control rods. Perfectly crafted Japanese made product. Learn More

Garrett G30-660 STANDARD ROTATION, 0.82 A/R, T3 Undivided (open), T31 (Narrow) 4 bolt

Regular Price: $2,589.47

Special Price $2,497.78

Garrett® G30-660 standard turbo assembly kit with 3" inlet and 2" outlet compressor housing and 0.82 A/R T3 undivided (open), T31 4 bolt (narrow) outlet turbine housing. Fits on the 2JR Tubular Turbo Manifold. Product Features: New G Series compressor wheel aerodynamics / Fully machined speed sensor and pressure ports / Standard and reverse rotation configurations available / Oil restrictor and water fittings included with purchase / One piece center housing and backplate for increased durability / 4 water jacket ports for customizable installation / Mar-M turbine wheel material rated up to 1050° C | 1922° F Product Specifications: Compressor Wheel Inducer: 54mm / Compressor Wheel Exducer: 67mm / Compressor Wheel Trim: 65 / Compressor Housing A/R: 0.70 / Turbine Wheel Inducer: 60mm / Turbine Wheel Exducer: 55mm / Turbine Wheel Trim: 84 / Includes Oil Feed (1mm) Restrictor Fitting to -4AN / Includes two Coolant Fittings to -6AN Optional Accessories (kit) 4 Bolt "T31" Narrow Outlet Flange (for Downpipe): Product Code:ATP-FLS-084 4 Bolt "T31" Outlet Gasket: Product Code:ATP-GSK-012 Oil drain flange: Product Code: ATP-FLA-010 Oil drain gasket: Product Code: GRT-GSK-008 Oil drain fasteners: Product Code: MIA-FST-034 Boost Pressure Port Fitting: ATP-FTG-198 Learn More

Turbosmart WG40 Wastegate / Compgate 40mm (7psi/14psi)

Regular Price: $333.28

Special Price $294.78

Turbosmart WG40 Wastegate / Compgate 40mm (7psi/14psi) Designed to fit into tight engine bays, Turbosmart’s brand new 40mm external wastegate offers a class-leading flow and heat handling capabilities. It is also the smallest wastegate in the Turbosmart range. *Revolutionary Locking Ring* Comp-Gate’s unique Locking Ring provides easy access to the the actuator, allowing for quick spring changes. The new actuator housing design allowed us to significantly reduce the height of the Comp-Gate40. It is up to 25% smaller than other wastegates in our range. *Higher Flow, Smaller size* New, compact body profile offers superior flow, compact dimensions and exellent heat handling characteristics. Measuring only 99mm, the Comp-Gate40 fits easily into space-restricted engine bays, and provides better access once mounted. One-piece, coated stainless steel valve and an optimal flow through the body provide superior performance and reliability. *Unique Rotating Cap* Comp-Gate’s clever cap design, together with the locking ring allow for the cap orientation to be indexed in 12 different positions, making this one of the most versatile external gates on the market. Changing the cap is a simple procedure of loosening the locking ring (using the tool provided with the Comp-Gate) and rotating the cap into the desired position. Comp-Gate40 comes supplied with a 7PSI or 14psi Spring (installed), inlet and outlet Weld Flanges, inlet and outlet V-Band clamps, valve seat, 2 x 1/16th blanking plugs, 2 x 1/16th Vacuum nipples and the locking ring collar removal tool. Learn More

Project Kics Leggdura Racing 53mm EL53 Shell Type Lug Nut 16 Pcs + 4 Locks 12X1.50 Black

Regular Price: $298.00

Special Price $277.78

Project Kics Leggdura Racing 53mm EL53 Shell Type Lug Nut 16 Pcs + 4 Locks 12X1.50 Black NOTE: Open-End style, not true open-ended lug nuts. Will NOT fit extended studs. The Kics Leggdura Racing 2-Piece Open Shell EL53 Lugnuts and Locks are the latest version of the extremely popular hybrid lugnuts. These are one of the ultimate lugnut sets for drivers seeking a hybrid setup that performs well on the track and looks great at shows and on the street! The SCM435 Alloy Steel Base lug is tough and durable, perfect for track days and resistant to any weather or road condition. They come included with 4 locks with unique patterns to prevent any wheel theft. The Anodized Aluminum Caps fit on top to provide a high quality finish for shows and general street driving. These have an open end style and allow for use of extended studs and new compression bolts. Features: - Type: Lugnuts with Locks - Material: SCM435 Base + 6061 Aluminum Caps - Finish: Base is Black + Cap come Anodized Red, Blue, or Black - Overall Length: 53 [mm] - Base Lug Length: 28.5 [mm] - Cap Length: 44 [mm] - Overall Diameter: 22 [mm] Included Parts: - 17Hex Base Lugs x16 - Special Key Lock Nuts x4 - Open-ended Aluminum Caps x20 - 17Hex Socket x1 - Locking Socket x1 - Plastic Cap Socket x1 NOTE: LUG NUTS ARE MADE WITH TAPERED BOTTOMS SPECIFICALLY FOR AFTERMARKET WHEELS. DO NOT USE THESE TUNER LUGS FOR YOUR FACTORY WHEELS. WE NO LONGER ACCEPT RETURNS ON LUG NUTS FROM CUSTOMERS WHO ATTEMPT TO USE THEM ON FACTORY WHEELS. THESE LUGS ALSO DO NOT FIT ON SPECIAL WHEELS THAT REQUIRE INVERTED LUGS. WE WILL ALSO NOT ACCEPT RETURNS FROM CUSTOMERS THAT TRY TO USE THEM FOR THESE TYPES OF WHEELS. Learn More

Non-core Patch Fee (UpRev)

$250.00

Non-core Patch Fee Reach out to 2J-Racing first before making this purchase to confirm your vehicle is supported! This is a development fee for doing full patches to non-core vehicles. This fee covers the labor time spent unlocking your file. You will need to purchase the cable/license from 2J-Racing as well. Refer to "UpRev Osiris Cable (Standard) - includes cable, license and 2JR Tune" ROM DUMP Instructions: If you are asked to do a ROM dump then please connect your USB Interface cable to your vehicle and your Windows based PC, open ROM Editor and click on 'Copy ECU Data'. Once completed it will ask you to submit it. Our developers will look at the ROM in the order they are received and will do their best to get it patched as quickly as possible. This process can take anywhere from 4-8 weeks depending on the workload and compexity of the ROM. You will be notified as soon as the file is completed and is available for use. Learn More

Takeda Momentum Cold Air Intake System w/ Pro 5R Media

Regular Price: $368.00

Special Price $349.78

Takeda Momentum Cold Air Intake System w/ Pro 5R Media Fits sedan and hatchback 2.0L This 7-1/2” tall 360-degree radial flow air filter features a 3-1/2" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The smooth one-piece sealed housing is constructed of heat-resistant cross-linked polyethylene (XLPE). A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. An auxiliary air inlet can be used, or closed with a supplied plug. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system. Learn More

QR25DE Head - Complete

Regular Price: $649.99

Special Price $499.98

QR25DE Head - Complete Fits all Gen1 or Gen 2 QR25 Engines Includes: cam buckets, cam caps, OEM Cams (intake and exhaust), OEM Springs, OEM Headgasket. Does not include Intake Cam Phaser or Exhaust Cam Sprocket We use stock OEM cores and perform the following services: - Hot Tank / Cleaned - 5 Angle Valve Job - OEM Valve Seals - Mating Surface Decked Flat - OEM Valve Springs - OEM Cam Set (Hot Tanked) Optional Parts: - Hi Rev Valve Springs - Sub OEM Cams for JWT C1 / RZ / S1s - Titanium Retainers - Intake Cam Phaser / Exh Cam Sprocket - Cometic Headgasket - ARP Headbolts Learn More

Search results for 'rev'