Search results for 'sentra b13'

Items 1 to 10 of 150 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Ascending Direction
  1. Nissan Sentra 2.5L ECU

    Nissan Sentra 2.5L ECU

    Regular Price: $399.98

    Special Price $349.98

    Nissan Sentra 2.5L ECU Used/Tested ECUs for Nissan Sentra 2.5L 2002-2006 QR25DE SpecV 2.5L These can come STOCK or UpRev Flashed with a tune (NON TURBO ONLY). If your car has NATS (P8, GU, R5) the ECU WILL NOT WORK UNLESS the dealer codes the key to the new ECU or you select UPREV Flashed in the options and we turn off the security in the ECU. ECUs are tested before shipment. No returns. Learn More
  2. UpRev MAF GT

    UpRev MAF GT

    Regular Price: $399.98

    Special Price $379.98

    UpRev MAF GT The UpRev MAF GT is an upgraded sensor for Nissan Vehicles. The sensor retains the same connector and pin-out as vehicles using the following part numbers Fits 2004-2012 QR25DE Sentra / Altima and Frontier 2003-2017 350/370Z 2011-2017 Nissan Juke Nissan – 22680-7S000 Hitachi – W0133-1723137 Hitachi – MAF0031 This sensor is not a factory replacement, ECU calibration is required in order to use the UpRev GT MAF. The GT MAF voltage scale has been changed to suite higher airflow and so the ECU should be calibrated to suit the different voltage curve. This MAF is capable of reading up to 600hp on a factory 350Z VQ35DE MAF housing, can read higher numbers with a bigger MAF housing. 3" or Larger MAF housing is preferred. Learn More
  3. Hitachi OEM Throttle Body (QR25DE)

    Hitachi OEM Throttle Body (QR25DE)

    Regular Price: $198.99

    Special Price $168.78

    Hitachi OEM Throttle Body (QR25DE) Fits years 02-06 - All QR25DE Engines (First Gen) 02-06 Sentra 2.5L 02-06 Altima 2.5L 02-06 Xtrail 2.5L 02-06 Frontier 2.5L SUPERIOR: Hitachi Astemo is a Tier 1 OE supplier for Electric Throttle Bodies. Performs like OE to ensure quality you can depend on, right out of the box. PERFORMANCE: New throttle position sensor technology over OE design ensures smooth idle conditions and precise air flow metering. Restores original drivability characteristics. QUALITY: Application specific gear ratios and materials provide precise control with reduced wear and tear on the electric motor. Every individual part number is extensively tested for durability and consistent accuracy as part of the design process. ASSURANCE: 100% New, never remanufactured. No product wears the Hitachi logo until it has been carefully designed, precisely manufactured, and rigorously tested. SUPPORT: Hitachi Astemo's commitment to innovation and quality are unsurpassed. Likewise, is our commitment to product support. Please check the cross reference compatibility for your vehicle using the Amazon part selection tool located above the product images. Learn More
  4. Injen 2007-2012 Sentra SER V-Spec 2.5L Gloss Black Cold Air Intake

    Injen 2007-2012 Sentra SER V-Spec 2.5L Gloss Black Cold Air Intake

    Regular Price: $400.89

    Special Price $369.78

    Injen 2007-2012 Sentra SER V-Spec 2.5L Gloss Black Cold Air Intake B16 2.5L QR25 ONLY - Manual and Auto The Injen SP Series Intake Systems Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. The Injen SP Series Intake System does not limit itself to just a Cold Air System or Short Ram System. The MR Technology process has its effects on both types. The Injen SP Series Intake is The World's First Tuned Intake System ... Learn More
  5. Injen 07-12 Nissan Sentra 2.0L Polished Cold Air Intake w/ MR Technology

    Injen 07-12 Nissan Sentra 2.0L Polished Cold Air Intake w/ MR Technology

    Regular Price: $317.98

    Special Price $291.78

    Injen 07-12 Nissan Sentra 2.0L Polished Cold Air Intake w/ MR Technology B16 2.0L ONLY! Manual and Auto The Injen SP Series Intake Systems Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. The Injen SP Series Intake System does not limit itself to just a Cold Air System or Short Ram System. The MR Technology process has its effects on both types. The Injen SP Series Intake is The World's First Tuned Intake System ... Learn More
  6.  BorgWarner EFR 6258 Turbo

    BorgWarner EFR 6258 Turbo

    Regular Price: $1,564.78

    Special Price $1,199.78

    Out of stock

    BorgWarner EFR 6258 Turbo BorgWarner EFR 6258 is the fastest Spooling EFR Turbo.. Ideal for small engines (2.5L) in single OR twin turbo configuration, this is an excellent turbocharger for autocross, rally, drift, road racing and street driven applications. A direct plug-n-play for SR20DET, its also popular for Subaru WRX and Nissan Sentra SpecVs. The 62mm OD compressor has a 49.6mm inducer rated at 44lb/min max flow – supporting up to 440hp. This compressor wheel is versatile with very large map width for outstanding power potential, even at high boost. The low inertia 58mm Gamma-Ti turbine wheel is optimally matched for maximum response and fast spool with the FMW compressor wheel. EFR 6258 uses the smallest-sized EFR compressor housing, making fitment in the tightest engine bays possible. Ideal for use in single turbo applications for the 260-440hp range, or as twin turbo applications 500-800+hp. Ceramic Ball Bearing only, watercooling recommended but not mandatory. COMPRESSOR SPECIFICATIONS Compressor Type: Forged-Milled Wheel (FMW) Extended Tip Compressor Wheel OD (exducer): 62mm Compressor Wheel Inducer: 49.6mm Max Flow Rate: 44 lb/min Built-in BOV: All EFR compressor housings incorporate an integrated BOV. Compressor Housing: 2.5″ inlet, 2.0″ hose coupler outlet. TURBINE SPECIFICATIONS Turbine Wheel Material: Low Inertia Gamma-Ti Turbine Wheel Turbine Wheel OD: 58mm (recommended) OR 55mm Turbine Housing Material: Stainless Steel Sand Cast Housing Turbine outlet: GT-Vband (aka small 3″ vband) ~92mm OD for all EFR turbos FEATURES Dual Row Ceramic Ball Bearings – lowest friction and fastest spool/response, most extreme durability, built-in 2mm oil restrictor Watercooled Center Section – watercooling is recommended, 14mm banjo bolts Learn More
  7. PRE ORDER 2JR 1.5" Drop Street-Spec Circuit Lowering Springs (01-06 Sentra)

    PRE ORDER 2JR 1.5" Drop Street-Spec Circuit Lowering Springs (01-06 Sentra)

    Regular Price: $179.99

    Special Price $129.78

    After a year of testing to refine the spring rates and ride height, 2JR introduces our own line of street performance springs. Perfect for stock shocks or pair with aftermarket shocks like KYB or Koni Yellows. Our springs are progressive rate which generates a better overall appearance while making a significant improvement in performance.

    Drops 1.5" over stock, with a perfect front to rear rake. These are probably the best springs we've ever encountered for the B15.  Fits all models 02-06

    Spring Rates - Front = 5.5K / Rear = 5.2K or 308lbs.in / 291lbs.in

    Learn More
  8. McLeod Tuner Series Street Tuner Clutch Altima 2002-06 2.5L Sentra 2002-06 2.5L Spec V

    McLeod Tuner Series Street Tuner Clutch Altima 2002-06 2.5L Sentra 2002-06 2.5L Spec V

    Regular Price: $395.78

    Special Price $359.78

    McLeod Tuner Series Street Tuner Clutch Altima 2002-06 2.5L Sentra 2002-06 2.5L Spec V STREET POWER- The Street Power clutch kit is the newest offering in the Supremacy Line for the Sport Compact and European Markets, it's the perfect choice for street/track applications. We recommend it for cars up to 40-50%% more power(depending on part number) perfect for street cars with moderate bolt on's. Included is a high quality matched pressure plate, high torque ceramic 6 puck disc for smooth and even engagement. Our kits are complete, they come with pilot tool and throw out bearing (where applicable). If you are looking for a clutch that's a great replacement from your stock set up, the McLeod Street Power is your best option. Supremacy by McLeod Racing. Learn More
  9. OEM Nissan Factory Nismo RS Clutch Kit (Juke / B17)

    OEM Nissan Factory Nismo RS Clutch Kit (Juke / B17)

    Regular Price: $1,279.98

    Special Price $829.78

    OEM Nissan Clutch Kit (Juke / B17) Application: Fits All Models Nissan Juke with MR16DDT (1.6L) Manual Fits All Models Nissan B17 Sentra SR / Nismo MR16DDT (1.6L) Manual OEM Part Numbers: 12310-3YV0A: $1,084.77 Flywheel 30100-1KCOA: $214.86 Disk 30210-1KC0C: $234.85 Pressure Plate OEM New Nissan Complete Clutch Kit. Includes Flywheel, Disk, Pressure Plate and Pressure Plate Bolts. Optional - OEM LUK Concentric Slave Unit Removed from New Nismo RS Engines. Learn More
  10. B15 (02-06) AEM Nissan Sentra SE-R Red Cold Air Intake

    B15 (02-06) AEM Nissan Sentra SE-R Red Cold Air Intake

    Regular Price: $399.98

    Special Price $379.98

    B15 (02-06) AEM Nissan Sentra SE-R Red Cold Air Intake 2.5L (02-06) Sentra Models CARB EO #: D-670-15 Our Cold Air systems are dyno-proven and tested against the competition to create more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. All AEM Cold Air systems are either 50-state legal or pending (excluding "Off Road" and "Hybrid" systems), include a lifetime DRYFLOW Synthetic air filter and come with a limited lifetime warranty. Learn More

Items 1 to 10 of 150 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Ascending Direction