Fiesta ST

Fiesta ST

Fiesta ST Street / Race Parts

All returns are subject to a 20% restocking fee.

Items 1 to 10 of 85 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Descending Direction
  1. Fiesta / Focus ST - Cobb Access Port (AP)

    Fiesta / Focus ST - Cobb Access Port (AP)

    Regular Price: $625.00

    Special Price $595.00

    Combining the world's best selling, most flexible ECU upgrade solution along with a high flow filter to increase air flow, COBB brings you the COBB Stage 1 Power Package for your 2014 Ford Fiesta ST. Get the best bang for your buck by treating your vehicle to parts that will increase your power and improve overall driveability. Nothing but a win/win situation! The Accessport V3 is the world's best selling, most flexible ECU upgrade solution for Ford. Unlock power hidden within the vehicle by replacing conservative factory settings with more aggressive calibrations. Upgrade forever with off-the-shelf (OTS) calibrations for most bolt-on modifications. It's the last engine management solution you'll ever need. COBB High Flow Filters are designed to permit very high flow rates, minimize restriction, maximize filtration and provide a long life filter. Using propriety woven cotton and metal mesh with a precision molded rubber base, the COBB High Flow Filter ensures that only clean air passes into your engine for maximum efficiency. Why not treat your car to fresh air with a COBB High Flow Filter and let it reward you with increased power, fuel economy and money savings! Learn More
  2. Hard Race Exhaust Hangers (Set of 4)

    Hard Race Exhaust Hangers (Set of 4)

    Regular Price: $29.87

    Special Price $22.99

    Hard Race Exhaust Hangers (Set of 4) Fits Nissan / Toyota / Subaru / Ford Dimensions: Length: 2-7/8, Width: 1-7/8, Height: 13/16. 12mm Holes * use Brake Cleaner to aid in installation (acts as a quick drying lubricant) High Durometer EPDM material with better abrasion resistance, high-temperature resistance and strength 1. Strong Lateral (side load) control 2. Reduce the height and contact surface b/w exhaust and chassis 3. Dampens vibrational interference b/w the hanger and exhaust Learn More
  3. Mishimoto Universal Thermostatic 10 Row Oil Cooler Kit

    Mishimoto Universal Thermostatic 10 Row Oil Cooler Kit

    Regular Price: $371.89

    Special Price $368.00

    Mishimoto Universal Thermostatic 10 Row Oil Cooler Kit Enthusiasts who push their high-performance cars to the limit understand the importance of keeping their oil temperatures in control to prevent damage, or even seizure of the engine.The Mishimoto Universal 10 Row Oil Cooler Kit will extend the life of your engine by ensuring your essential high-wear engine components such as piston rings, skirts and cam bearings are sufficiently lubricated with cooler oil.The Mishimoto oil cooler kit is available with an optional thermostatic sandwich plate for safe daily-driver warm up and additional operating temperature control.Included with the purchase of the 10 Row Oil Cooler Kit are high-quality, stainless steel braided hose lines and all necessary adapters for universal installation.Offered with either a black or silver cooler, the Mishimoto Universal 10 Row Oil Cooler Kit includes a Lifetime Warranty, so you know quality is guaranteed! Available in Black or Silver Learn More
  4. 02 Sensor 90° Catted De-fouler - Stainless Steel

    02 Sensor 90° Catted De-fouler - Stainless Steel

    Regular Price: $35.00

    Special Price $26.00

    Assists in removing the cat code by spacing out your secondary 02 Sensor. Fits on all 2JR Downpipes and midpipes (Sentra, Juke, Fiesta, Focus, Etc) made from Stainless Steel. Learn More
  5. Cobb Tuning - Fiesta ST Stage I Package (2014-2019)

    Cobb Tuning - Fiesta ST Stage I Package (2014-2019)

    Regular Price: $650.00

    Special Price $639.99

    Choose 7.99 shipping at checkout Accessport / RMM / Intake Filter The Accessport V3 is the world's best selling, most flexible ECU upgrade solution for Ford. Unlock power hidden within the vehicle by replacing conservative factory settings with more aggressive calibrations. Upgrade forever with off-the-shelf (OTS) calibrations for most bolt-on modifications. It's the last engine management solution you'll ever need. COBB High Flow Filters are designed to permit very high flow rates, minimize restriction, maximize filtration and provide a long life filter. Using propriety Woven cotton and metal mesh with a precision molded rubber base, the COBB High Flow Filter ensures that only clean air passes into your engine for maximum efficiency. Why not treat your car to fresh air with a COBB High Flow Filter and let it reward you with increased power, fuel economy and money savings! The COBB Ford Fiesta ST Rear Motor Mount is the best way to minimize engine movement, improve traction, and reduce wheel hop without major impact to NVH. Learn More
  6. 2JR Fiesta ST Ultra-Quiet 3" Side Exit

    2JR Fiesta ST Ultra-Quiet 3" Side Exit

    Regular Price: $579.00

    Special Price $489.00

    2JR does it once again with their custom built side exit for the Fiesta ST. We've built this exhaust for the best performance, sound and weight savings possible over any exhaust on the market. Made from 4mm thick 304 Stainless Steel for long life, corrosion resistance and strength in the harshest track environment. Next we've added steel encased rubber hangers that bolt to the chassis at stock location points for a perfectly tight fit centered on the sill opening - this allows for no burning of the sill. Then we use an oval stainless tail section for ground clearance over the pinch weld. For the keeping this completely street legal for sound, 2JR uses a large free flowing stainless resonator to designed to keep the exhaust tone completely tame (even with a catless downpipe) while keeping backpressure at an absolute minimum. Lastly - and most importantly, is the weight savings. Lighter than any other widely used system on the market with approx. 35% less piping and weight. Will bolt to the stock downpipe or the 2JR downpipe (or any other aftermarket production downpipe). NOTE: you will need to trim the pinch weld in a 4" section using a die grinder or similar. Then you will need to trim the plastic surround inside the sill where the factory cutout is located. This can be done with a dremel. Both are quite easy to do. SOUND CLIP: https://www.facebook.com/2JRacing-206550699368164/ SEE BOTTOM OF PAGE FOR INSTALL INSTRUCTIONS Learn More
  7. PRE-ORDER 2JR Fiesta ST Cowl Induction Intake

    PRE-ORDER 2JR Fiesta ST Cowl Induction Intake

    Regular Price: $299.99

    Special Price $219.00

    For the first time ever you can add gold heat wrap tape, and custom candy colors to your order. You can also add the Cobb PCV adapter, required for all +2016 models in the options!

    2JR introduces the world's first and only cowl induction intake for your Fiesta ST. All other intakes place the air filter behind the stock fans to pull in heat directly into the engine (after being heated again by the compression of the turbo). 2JR places the filter inside the cowl, where it only receives cold air from beneath the windshield. NOTE - recommended for racing purposes as this intake IS LOUD. Extremely loud inside the car. You may use it on the street, but you will be listening to induction noise whenever you step on the gas. To us tho, it sounds amazing. The production intake will be one continuous pipe - without the pie cuts

    Install time - 2 hours. A tune is not required.

    With our 2JR race downpipe, cowl intake and 3" exhaust and tune - we put down 288wtq, consistently, run after run.

    To install you will need to cut the lower plastic housing on the cowl AND extend your MAF wires. All other hoses, clamps and K&N Air Filter are included in the kit.

    Made in the USA for perfect fitment and quality.

    For 2016+ FiST, use the COBB PCV Intake Adapter https://www.cobbtuning.com/products/air-induction/ford-intake-adapter-fiesta-st-2016-2017

    Learn More
  8. 2JR Fiesta ST Hi-Power Downpipe 304SS

    2JR Fiesta ST Hi-Power Downpipe 304SS

    Regular Price: $329.99

    Special Price $199.00

    Made from 304SS Stainless, bolts to the OEM exhaust or 3" Catback System. The sound level of the full race to the catted downpipe is nearly same, only 7-10db at WOT. With our 2JR 3" catback and full race downpipe, its very streetable. The difference in WTQ vs the OEM downpipe is over 30ft/lbs. With our defouler (optional) - we never had a check engine light in over 20K miles and passed GA emissions testing. Now with lower bracket for strength With our 2JR 3" Catback, Full Race DP, Cobb AP (93map V1), and K&N Drop in Filter - we clicked off continuous 247-251wtq runs with varying between 200-202 whp. With the 2JR catted DP and the same mods, we turned mid 230wtq. Sound Clips (2JR 3" Catback with Full Race DP) Intake Sound http://1drv.ms/1ldXC1z Driveby http://1drv.ms/1ldXNtH Pull Off http://1drv.ms/1ldXUFR Learn More
  9. Fiesta ST Delrin Lower Mount Insert

    Fiesta ST Delrin Lower Mount Insert

    Regular Price: $89.99

    Special Price $64.99

    No more engine knock on firewall! 2JR Solid Delrin insert for the Fiesta ST lower mount. Reduces engine movement by over 75%. Provides excellent shift feel and more front bite during spirited driving. Minimal vibration. Used on 2JR Time Attack Fiesta ST. Learn More
  10. Fiesta ST - Wilwood Front Big Brake Kit

    Fiesta ST - Wilwood Front Big Brake Kit

    Regular Price: $949.99

    Special Price $899.99

    Fits Fiesta ST and all Fiesta models (2011- current) The enhanced brake capacity and pad performance of the DynaPro 6 forged billet six-piston caliper is combined with 12.19” diameter rotors for this group of front wheel drive sport compact kits. These kits are the perfect compliment to wheel, tire, and suspension upgrades on daily drivers, competition vehicles, and custom styled show machines. Each kit is engineered vehicle specific to maintain full compatibility with the OE master cylinder output and factory ABS functions. Optional caliper finishes and rotor designs enable the builder to personalize the style and optimize brake performance for every individual application. Fits all 17" rims - no spacers required. Some 16" rims will clear, please call to confirm. Wilwood Stainless Line Kit is REQUIRED for install (includes all fittings) 2JR allows you to choose your brake pad compound BP10 - Street BP20 - Street Performance PolyMatrix E - Street Performance / Light Track Duty (best for AutoX, Track Days) BP40 - Light Street / Moderate Track Duty Kits take approx 2-3 weeks to build/ship Brake Pad Info/Specs: http://www.wilwood.com/BrakePads/BrakePadsApp.aspx Learn More

Items 1 to 10 of 85 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Descending Direction