Ford Focus RS

Focus RS Performance Parts

All returns are subject to a 20% restocking fee, for new unused parts - 30days from purchase.

Items 1 to 10 of 25 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Descending Direction
  1. Focus RS Accessport V3

    Focus RS Accessport V3

    Regular Price: $695.00

    Special Price $689.00

    Accessport for the Focus RS The Accessport V3 is the world's best selling, most flexible ECU upgrade solution for Ford. Unlock power hidden within the vehicle by replacing conservative factory settings with more aggressive calibrations. Upgrade forever with off-the-shelf (OTS) calibrations for most bolt-on modifications. It's the last engine management solution you'll ever need. Learn More
  2. COBB Cold Air Intake System Redline Carbon Fiber Focus ST / RS

    COBB Cold Air Intake System Redline Carbon Fiber Focus ST / RS

    Regular Price: $750.00

    Special Price $739.68

    COBB Redline Carbon Fiber Cold Air Intake System Vehicle Fitment: - 2013-2018 Focus ST - 2016-2018 Focus RS If you are dreaming of freeing up the airflow and add a level of refinement under the hood of your 2013-2018 Focus ST or 2016-2018 Focus RS without any compromises, you have come to the right place! CJ Pony Parts is pleased to provide you with a brand new COBB Redline Carbon Fiber Cold Air Intake System (793150) for your 2013-2018 Focus ST or 2016-2018 Focus RS. The COBB Ford Focus ST/RS Redline Carbon Fiber Intake is a great way to dress up your engine bay while increasing engine performance at the same time! Features and Benefits: - 3k tow 2x2 Twill Carbon Fiber Construction - Large 3" piping for ideal flow - Pre-Oiled and Re-usable Dual Cone Air Filter - Black 4-ply Silicone Couplers - Black E-Coated 304 Stainless Steel Clamps - Made in the USA The carbon fiber tube and airbox lid are constructed of a 3k tow in a 2x2 twill weave pattern. Everything is held together with black 4-ply silicone couplers accompanied by black e-coated 304 stainless steel hardware. A gloss finish and bespoke Redline-specific badge keeps everything tidy under the hood. Included is a pre-oiled, dual cone, filter to increase airflow and amplify that great turbo sound. This intake is a complete factory replacement all the way to the turbo and is compatible with the original factory tune and all available COBB OTS maps. Tech Tip: To get the maximum performance out of your Focus ST or RS, pair this COBB Carbon Fiber Cold Air Intake System with a COBB Accessport V3 (P/N: AP3FOR001 and AP3FOR004). Learn More
  3. Cobb Ford 16-18 Focus RS / 13-18 Focus ST Redline Carbon Fiber Air Scoop

    Cobb Ford 16-18 Focus RS / 13-18 Focus ST Redline Carbon Fiber Air Scoop

    Regular Price: $195.00

    Special Price $186.78

    Cobb Ford 16-18 Focus RS / 13-18 Focus ST Redline Carbon Fiber Air Scoop Fitment Information: 2013-2018 Ford Focus ST 2016-2018 Ford Focus RS This piece channels air from the large grille opening directly into the factory snorkel feeding the stock airbox. Features: 2x2 Twill Carbon Fiber Weave Debossed COBB Logo Easy Installation Installation Guide An increased amount of cooler airflow is key in making the most efficient power out of your Focus ST or Focus RS! Pulling in fresh air from the grill ensures that air entering into the intake system is as close to ambient as possible. Learn More
  4. K&N Filter Replacement for 2JR Focus Cowl Intake

    K&N Filter Replacement for 2JR Focus Cowl Intake

    Regular Price: $37.99

    Special Price $31.99

    K&N Filter Replacement for 2JR Focus ST and RS Cowl Intake Learn More
  5. 02 Sensor 90° Catted De-fouler - Stainless Steel

    02 Sensor 90° Catted De-fouler - Stainless Steel

    Regular Price: $35.00

    Special Price $26.00

    Assists in removing the cat code by spacing out your secondary 02 Sensor. Fits on all 2JR Downpipes and midpipes (Sentra, Juke, Fiesta, Focus, Etc) made from Stainless Steel. Learn More
  6. Cobb Ford Focus RS Stage 1 Power Package

    Cobb Ford Focus RS Stage 1 Power Package

    Regular Price: $685.00

    Special Price $659.99

    Accessport for the Focus RS and Cobb Intake Filter The Accessport V3 is the world's best selling, most flexible ECU upgrade solution for Ford. Unlock power hidden within the vehicle by replacing conservative factory settings with more aggressive calibrations. Upgrade forever with off-the-shelf (OTS) calibrations for most bolt-on modifications. It's the last engine management solution you'll ever need. Learn More
  7. Limited Run -  2JR Focus RS Cowl Induction Intake

    Limited Run - 2JR Focus RS Cowl Induction Intake

    Regular Price: $349.99

    Special Price $299.00

    WE KNOW IT'S A LOT - BUT PLEASE READ BEFORE ORDERING! Template for the cowl cutout - use only as a reference https://1drv.ms/u/s!AjQkUN52fS1SkYsxogJlFVCW9jLMrw Check out the full install of the 2J Racing cowl induction intake for the Focus here: https://youtu.be/MtipNgHJUX0 Check out the complete unboxing of the NEW 2J Racing cowl induction intake for the Focus here: https://youtu.be/zhqUlagPoRI Check out the Comparison between the NEW 2J Racing cowl induction intake and my old depo intake here: https://youtu.be/GoTbfZnQ3EI 2JR introduces the world's first and only cowl induction intake for your Focus RS. Most intakes place the air filter behind the stock fans to pull heated air directly into the engine (after being heated again by the compression of the turbo). 2JR places the filter inside the cowl, where it only receives ambient cold air from beneath the windshield - in a very high pressure area (another benefit). NOTE - this intake IS LOUD. To us tho, it sounds amazing. Please refer to the "production photos" listed to the left of the final version of the intake. The 2JR Cowl intake does include the provision for the EVAP hardline. Its completely plug and play - the OEM hardline clips in to our machined fitting - we have an extension hose that connects to the cowl intake. Same for the IAT sensor - instead of the silly grommet ours is a machined fitting the sensor rotates into - just like stock. So it'll never come lose or leak. - Install time - 2 hours. A tune is not required. - In testing we saw ambient or just a deg or two below ambient during cruising and slight increases under heavy load. - To install you will need to cut the lower plastic housing under the cowl (very easy) and the upper cowl vent panel (we will provide a template for the vent panel) - you will also need to extend your IAT wires (2 of them) by 36" or purchase the optional JMS IAT Extension. All other hoses, clamps and K&N Air Filter are included in the kit. - Made in the USA for perfect fitment and quality. - Powdercoating adds 15-20 days. NOTE: The intake filter sits suspended in the cowl (not resting on the floor). The was done to prevent any water from being pulled in the intake that may build up on the cowl floor. We do recommend the optional KN filter sock to help keep the filter extra dry - as the piping turns down very close the the plastic upper cowl seal at the windshield. For added security you could trim the upper cowl to act as a bit of flashing to help offset any water intrusion. In testing, we didnt incur any issues during heavy rains - but you should always maintain the highest precaution against this occurring in your neck of the woods. FINAL NOTE: JMS made for us the IAT extension harness. If you dont want to add 36" to your stock IAT harness (2 or 4 wires need to be extended) add this JMS harness in the options. Makes for a painless install. We also recommend the KN Dry filter Sock to help keep it dry. Additionally, we also recommend a sound suppression chamber. The purpose is to reduce the intake whistle sounds that accompany aftermarket intakes. Mountune and Cobb both make a sound suppression chamber and are available as options to add to your purchase. Learn More
  8. Borla Focus RS Turbocharged 2.3L Single Split Exit ATAK Catback Exhaust

    Borla Focus RS Turbocharged 2.3L Single Split Exit ATAK Catback Exhaust

    Regular Price: $1,328.99

    Special Price $1,249.00

    BORLA has announced the development of a revolutionary new exhaust technology that enables their engineers to deliver unprecedented vehicle-specific control over the acoustical note of an exhaust throughout the RPM range, while retaining 100% of the power-adding capabilities of BORLA’s patented Multicore design. Called ATAK (Acoustically-Tuned Applied Kinetics), this exclusive technology (U.S. patent #5,248,859) produces the highest available dB (decibel) levels in the BORLA street-legal lineup, and is designed for high-performance purists who prefer exhaust notes over their stereos. The focus of ATAK is to pump the volume while retaining clarity of sound, at the same time avoiding the drone and distortion typically found in louder exhausts. With ATAK, the sound output is tuned like a graphic equalizer to shape and focus sound waves for optimum high-volume output. The development of each ATAK system begins with extensive study of each vehicle’s acoustical properties. The technology is based on custom-tuned attributes of the internal muffler cores, which are calibrated on a vehicle-by-vehicle basis to deliver the most desirable sound. BORLA is now shipping Cat-Back and/or Rear Section ATAK exhaust systems for a wide variety of popular applications. Like all BORLA exhaust products, each system is handmade in the USA by master craftspeople and features premium 300-Series austenitic stainless steel construction, mandrel bending by computer-controlled CNC machinery to ensure maximum flow and a perfect fit, mirror-polished tips, and a Million-Mile Warranty Learn More
  9. BC Racing Custom Spec'd Coilovers

    BC Racing Custom Spec'd Coilovers

    Regular Price: $1,250.00

    Special Price $1,247.98

    Finally, the best coilovers on the market are now available through 2JRacing with custom spring rates and valving to match. No more oversprung/under-dampened coilovers that exude a bouncy ride. BC Racing coilovers provide the perfect balance of handling and performance without being stiff. 4.5 years of racing on our original set with zero leaks or issues. Extremely durable and quiet. Customize your choices to match your driving style and level of performance. Available for a number of performance vehicles (Nissan / Ford / Etc) AVAILABLE MODELS - CHECK HERE: http://www.bcracing-na.com/wp-content/uploads/2014/07/BC-application-list-2014.pdf Ships for $9.89 in the lower 48 states Learn More
  10. aFe Takeda 3in 304 SS Cat-Back Exhaust w/ Polished Tip Ford Focus RS 2.3L (t)

    aFe Takeda 3in 304 SS Cat-Back Exhaust w/ Polished Tip Ford Focus RS 2.3L (t)

    Regular Price: $1,074.99

    Special Price $999.99

    Power, sound and good looks is what this Takeda cat-back exhaust delivers. Power gains of up to +11 horsepower and +15 lbs. x ft. torque as shown on our in-house dyno. 3"- 2-1/2" mandrel bent 304 stainless steel tubing and high flow transverse muffler offers maximum exhaust flow and incorporates a factory style exhaust valve to control the exhaust note. The valve utilizes the factory valve motor and factory performance modes. When closed, it directs the exhaust through the high flow muffler for a smooth, tuned exhaust note. When opened, the exhaust is allowed to bypass the muffler and unleash the sound and performance of your RS. The high flow, stainless steel muffler is finished in high temp, metallic black powder coating for long lasting good looks. Dual 4 1/2" stainless steel exhaust tips with laser etched Takeda brand logo for a custom finish. Learn More

Items 1 to 10 of 25 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Descending Direction