Cold Air Intake / Plenum

All returns are subject to a 20% restocking fee.

Items 1 to 10 of 16 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction
  1. 2JR Hi-Power Intake Plenum-Full Kit

    2JR Hi-Power Intake Plenum-Full Kit

    Regular Price: $899.99

    Special Price $679.99

    2JR introduces the best intake plenum for your 1st gen QR with custom CNC milled throttle plates, machined and decked head surfaces to maximize power and gains while providing no ECU fault codes or issues. Huge mid range gains with excellent top end performance. No tune is required. For both NA (low and high comp) and forced induction applications (up to 20psi). Expect quicker throttle response and improved driveability. Both on and off the street. Includes a new high-capacity fuel rail and all hardware necessary for a complete install. Optional is our 2JR 1-piece Moto-style cold air intake. Save over $45 when you purchase both together. NOTE! IF YOU ADD THE 76MM PLENUM SPACER MOD - YOU DONT NEED THE 5" SILICON COUPLER. The plenum spacer mod adds a ton of volume to the hi-power plenum. Its a MUST HAVE! OVER 28whp in the midrange. The highest hp mod available for the B15. Learn More
  2. Candy Purple 2002-2003 Sentra B15 2.5L Hi-Power 3" Cold Air Intake

    Candy Purple 2002-2003 Sentra B15 2.5L Hi-Power 3" Cold Air Intake

    Regular Price: $299.99

    Special Price $199.99

    ONLY 2 IN THIS COLOR. ONLY FITS 2002-2003 SPECVS!!! This is the highest HP producing intake we've ever tested. Over 8 hp more than a Nismo Cold Air intake!!. Makes Over 15 than the stock box. Refer to the dyno for Nismo vs 2JR

    Can be used for supercharged or turbo applications if the customer chooses. Has a full 3" MAF section with the appropriate MAF spacing in the piping to prevent any unwanted air disturbance which would cause MAF spikes. Nissan MAFs are require a specific amount of straight pipe before and after the MAF for optimum performance. Our intake is a full mandrel bent, completely seamless, power section cold air intake. The MAF is hidden on the backside and it has just one coupler, at the TB. It fits around your Stock battery.

    Can be shortened by the owner for a short ram setup. Power, design and function. And for less than any other cold air intake on the market. This is the highest HP producing intake for the Spec-V. It also sounds incredible at wide open throttle!

    Intake includes
    1. 1 piece seamless high polished piping with integrated MAF housing / power section
    2. 1 dry hi-flow filter
    3. 1 coupler assy with band clamps
    4. 1 VC to CAI hose
    5. 1 round bushing for securing the intake (w hardware)


    Learn More
  3. B15 Sentra Catch Can Kit - 02-06 Models QR25

    B15 Sentra Catch Can Kit - 02-06 Models QR25

    Regular Price: $199.00

    Special Price $159.99

    2JR Complete Catch Can Kit for the B15 Sentra - 02-06 Models QR25. Arrives with all the lines precut for ease of installation, billet mounting bracket, spring clamps, optional drain kit and engraving. 4 Color Choices available. Please know that each kit is built to your order specifications and can take approx 2 weeks to ship depending on production cycle. Mounts directly to the B15 Firewall using existing threaded holes. No cutting/drilling required. Works on any intake with PCV port before the throttle body, inc OEM/2JR/AEM/Injen/Nismo FOR INSTALL INSTRUCTIONS - REFER TO THE VIDEO ON THE 2JR FACEBOOK PAGE AND/OR YOUTUBE CHANNEL! Benefits: -Effectively raises the octane and increases engine performance from cleaner inlet air -Prevents oil buildup in the intake, plenum, intercooler, throttle body, etc. -Excessive oil collection can be an indicator of a damaged engine -Lowers hydrocarbon emissions Features: -6061 Billet Aluminum O-Ring Sealed Oil Can -Integrated Oil Separating Condensing -Billet 6061 1/2" thick mounting bracket with stainless hardware -All precut lines/fittings and spring clamps -Optional Drain Kit -4 Color Options -2JR Engraving Option -Safe for Pressurized Applications Learn More
  4. B16 Sentra Catch Can Kit - +07 Models QR25

    B16 Sentra Catch Can Kit - +07 Models QR25

    Regular Price: $199.00

    Special Price $169.00

    2JR Complete Catch Can Kit for the B16 Sentra +07 Models QR25. Arrives with all the lines precut for ease of installation, billet mounting bracket, spring clamps, optional drain kit and engraving. 4 Color Choices available. Please know that each kit is built to your order specifications and can take approx 2 weeks to ship depending on production cycle. B16 Kits include a billet adapter for the intake. Now you can trash that huge plastic chamber that sits over the valve cover. Works on any B16 specific intake - including OEM. FOR INSTALL INSTRUCTIONS - REFER TO THE VIDEO ON THE 2JR FACEBOOK PAGE AND/OR YOUTUBE CHANNEL! Benefits: -Effectively raises the octane and increases engine performance from cleaner inlet air -Prevents oil buildup in the intake, plenum, intercooler, throttle body, etc. -Excessive oil collection can be an indicator of a damaged engine -Lowers hydrocarbon emissions Features: -6061 Billet Aluminum O-Ring Sealed Oil Can -Integrated Oil Separating Condensing -Billet 6061 1/2" thick mounting bracket with stainless hardware -All precut lines/fittings and spring clamps -Optional Drain Kit -4 Color Options -2JR Engraving Option -Safe for Pressurized Applications Learn More
  5. LAST BATCH!  STILLEN Velocity Stack Air Intake - SENTRA 2.5L 02-06

    LAST BATCH! STILLEN Velocity Stack Air Intake - SENTRA 2.5L 02-06

    Regular Price: $181.76

    Special Price $119.99

    8WHP with a Stillen Velocity Stack Intake! We have only 3 remaining of the Stillen Intake - FINAL RUN Additional air flow increases the engine's efficiency and power by adjusting the air/fuel ratio. The STILLEN Hi-Flow intakes consist of K&N Washable Cone Filters along with a Velocity Stack that uses the venturi effect to accelerate air intake speed. You will notice increased power and throttle response throughout the entire RPM range. Adding a Hi-Flow Intake System could be your best dollar per horsepower investment over other modifications. The roar from the engine room is simply priceless. Get yours now! SENTRA 2.5L 2002-2006 Includes Heat Shield, Filter and Velocity Stack. Learn More
  6. 2JR Gold Heat Reflective/ Protective Tape

    2JR Gold Heat Reflective/ Protective Tape

    Regular Price: $59.99

    Special Price $39.99

    2JR High Heat reflective tape - up to 40% reduction in radiant heat on intake plenums and intakes. So much so, that when tested on a ND Miata, IAT temps remained at Ambient in the engine bay! Down from over 130deg to just equal to the outside air temp. Protects firewalls and heat shielding. Constructed of highly reflective metalized polyimide film Withstands up to 675°F Reflects heat and protects sensitive engine components from high temperatures Self-adheres using a high temperature pressure sensitive adhesive 2" x 35 Feet Roll Learn More
  7. K&N Dry Flow Air Filter Wrap

    K&N Dry Flow Air Filter Wrap

    Regular Price: $40.99

    Special Price $29.99

    K&N Dry Flow Air Filter Wrap K&N Dryflow Pre-Filters are manufactured from a durable micro-screen material and pretreated with a proprietary hydrophobic process designed to prevent splashes of water or mud from saturating your Dryflow air filter. K&N Dryflow Pre-filters also stop small dirt particles; yet add little restriction. - Made of a durable micro-screen material - Protects your Dryflow air filter from water and mud - Also blocks small dirt particles - Adds very little air restriction FITS ALL 2JR INTAKES!! Choose 6.99 shipping option Learn More
  8. 2JR 76mm Billet Hi-Power Intake Plenum Spacer

    2JR 76mm Billet Hi-Power Intake Plenum Spacer

    Regular Price: $149.99

    Special Price $89.99

    Massive 76mm Intake Plenum Spacer for the 2JR Plenum Kit. Adds over 3" of plenum volume to the intake - for more POWER. The inside is tappered to match the Throttle Body and Plenum sizes for a venturi effect. This is the best way add more horsepower to your Hi Power plenum. In stock ONLY WORKS WITH THE 2JR PLENUM! Learn More
  9. B15 (02-06) Sentra SpecV Injen SP Series Cold Air Intake

    B15 (02-06) Sentra SpecV Injen SP Series Cold Air Intake

    Regular Price: $349.99

    Special Price $224.99

    Injen Air Intake - SP Series Intake System: The Injen SP Series Intake Systems Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. The Injen SP Series Intake System does not limit itself to just a Cold Air System or Short Ram System. The MR Technology process has its effects on both types. The Injen SP Series Intake is The World's First Tuned Intake System Learn More
  10. B16 (07-13) Sentra SpecV Injen SP Series Cold Air Intake

    B16 (07-13) Sentra SpecV Injen SP Series Cold Air Intake

    Regular Price: $349.99

    Special Price $299.99

    Injen Air Intake - SP Series Intake System: The Injen SP Series Intake Systems Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. The Injen SP Series Intake System does not limit itself to just a Cold Air System or Short Ram System. The MR Technology process has its effects on both types. The Injen SP Series Intake is The World's First Tuned Intake System Learn More

Items 1 to 10 of 16 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction