Nissan Juke
All returns are subject to a 20% restocking fee, for new unused parts - 30days from purchase.
-
Nissan 55mm Full Race Wheel Studs - fits all models
Regular Price: $5.25
Special Price $3.68
We were asked to make these for the GTRs (we make their hubcentric wheel spacers) and we are offering these for the Sentras as well. This is a true racing wheel stud with rounded ends for wheel changes without damaging the threads. It also allows you to set your lug nuts on the studs for quick install with an impact gun. All the specs were designed with the GTR in mind, thread length, strength, material and longevity. These aren't black, zinc coated studs that quickly rust. These studs will never rust and can handle 25mm of increased track width per side. 55mm, Forged Chromoly SCM435. Also available in 82mm SOLD AS EACH $59 for pack of 16. Learn More -
LIQUI MOLY 3L Fully Synthetic Hypoid Gear Oil (GL4/5) 75W90
Regular Price: $76.98
Special Price $68.97
LIQUI MOLY 3L Fully Synthetic Hypoid Gear Oil (GL4/5) 75W90 Comes in a kit - 3L (3 1L Bottles) Fully synthetic hypoid gear oil, ideally suited for high performance applications even under extreme loads and operating conditions. Ensures maximum wear protection and promotes precise functionality over a wide temperature range and enables longer oil change intervals. Used exclusively in Nissan, Toyota, Scion, Subaru Transmissions and Differentials where GL4/5 is required/recommended Learn More -
Injen 2012-Current Nissan Juke 1.6L Turbo CVT (incl Nismo) Black Short Ram Intake
Regular Price: $270.00
Special Price $249.00
The Injen SP Series Intake Systems Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. The Injen SP Series Intake System does not limit itself to just a Cold Air System or Short Ram System. The MR Technology process has its effects on both types. The Injen SP Series Intake is The World's First Tuned Intake System Learn More -
Injen 2012-Current Nissan Juke 1.6L Turbo CVT (incl Nismo) Polished Short Ram Intake
Regular Price: $270.00
Special Price $250.00
The Injen SP Series Intake Systems Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. The Injen SP Series Intake System does not limit itself to just a Cold Air System or Short Ram System. The MR Technology process has its effects on both types. The Injen SP Series Intake is The World's First Tuned Intake System Learn More -
K&N 69 Series Typhoon Performance Intake Kit for 2012-Current Nissan Juke 1.6L
Regular Price: $379.99
Special Price $360.00
The K&N 69-7079TS Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Nissan Juke models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-7079TS air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive silver powder-coat finish that's made to last and it accommodates the factory mass air sensor and fresh air intake tube. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a couple of screwdrivers, pliers, a ratchet set and an Allen wrench. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. Learn More -
MR16 (1.6L) Cometic Tri Layer Metal Headgasket
Regular Price: $179.99
Special Price $149.99
Now available for all MR16 engines - Cometic Tri Layer headgasket. Provide your MR with the ultimate in protection during high boost runs with a cometic HG. Tested by 2J under the harshest conditions. Provide maximum sealing performance for today’s high output engines. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements. Custom made specifically for your MR 1.6L Engine Learn More -
Injen 2012-2017 Nissan Juke (Including NISMO) 1.6L Turbo Full Cold Air Intake (Polished/Red)
Regular Price: $279.00
Special Price $249.00
Cold Air Intake Design / Features Injens patented MegaRam (MR) Technology / Features Injens patented Air Fusion Technology Provides power gains while maintaining A/F ratios No additional tuning required 6061-T6 aluminum intake tubing Fully serviceable Injen SuperNano-Web dry air filter Replacement air filter part number X-1013-BB Available in multiple finishes Aggressive engine tone under full throttle Learn More -
AWD Injen Nissan Juke (incl Nismo) Polished Stainless Steel Catback Exhaust
Regular Price: $949.78
Special Price $899.78
Injen Technologys Super SES line of exhaust systems are dyno-tuned to compliment our performance intake systems; in doing so the Super SES provides maximum horsepower and torque across the power band. The Super SES exhaust system is manufactured from 100% 304 stainless steel. Each exhaust system features CNC mandrel-bent stainless steel tubing CNC machined flanges and robotic TIG welding. Fits AWD ONLY Learn More -
GReddy FWD Nissan Juke Evolution GT Exhaust
Regular Price: $700.00
Special Price $665.79
The evolution continues with new GReddy EVOlution GT exhaust line. Improved and refined, this latest generation of Evo exhaust incorporates our new high flow straight-through internals and limited lifetime warranty. It also retains the benefits of the compact and efficient, offset-tip design of the previous Evo’s muffler. Each EVOlution GT is carefully constructed from precision TIG welded, high quality 304 stainless-steel. High flow with a deep rich exhaust note is what the GReddy Evo line is know for. For FWD Jukes - all years Learn More -
MR16DDT (Juke/B17 Sentra/Nismo) 2JR Forged Pistons
Regular Price: $729.99
Special Price $629.99
2JR Forged Pistons for the MR16DDT 1.6L (Juke) provide 10.0-1 compression ratio (slightly over over early Juke models) for increased boost response. Designed for maximum strength with super thick piston pins, thicker ring lands than stock. Fit all years of the MR16DDT. -4032 extruded material forged for maximum strength. -Precision tolerance CNC ,machining for quality, repeatability, and performance. -Crown thickness and ring lands designed for power-adders, such as; forced induction, (turbo & blowers), and nitrous oxide. -Wrist pins constructed of chrome moly steel material for the ultimate in strength. -Precision pin bore finish for a high tolerance fit between piston pin and piston. -Pirolox featuring chrome silicon material for the ultimate yield strength. -All pistons are deburred for trouble free installation. Features include: - High strength aluminum forgings - Super lightweight designs - Fully CNC machined and balanced to +/- 1 gram - Wrist pins included at no extra cost - Accumulator groove included - Double pin oilers, force fed from oil ring - Pick lock grooves for easy lock removal Complete Piston Kit Contains: Piston Piston Rings Piston Wrist Pins And all necessary piston components Learn More