Exhausts
16 Item(s)
Grid List
-
Nissan Juke AWD Midpipe
Regular Price: $319.99
Special Price $239.78
Nissan Juke AWD Midpipe (fits all years) Application: Nissan Juke CVT All Wheel Drive (AWD) Years: 2011 to 2017 Material: Stainless Steel / Polished Size: 70mm AWD: No Defouler Needed The 2JR midpipe replaces the restrictive factory midpipe and catalytic converter with a larger, 70mm stainless steel mandrel-bent system, featuring a stock flange that bolts to the factory catback or aftermarket/2JR catback. Expect better throttle response, more horsepower (+12whp dyno proven w/o a tune) and an intoxicating exhaust note, while remaining civilized during normal daily driving. It’s one of the best performance upgrade for the Juke. NOTE: to fit with AWD Stillen catback you must run a flat 2 bolt flange at the front of the Stillen catback Learn More -
2JR Street Performance AWD 70mm Stainless Juke Catback
Regular Price: $829.99
Special Price $719.98
2JR is doing a limited run of Street Performance AWD Catbacks exhausts for the Nissan Juke - all years/models. 2JR uses all Vibrant components on the AWD exhaust. Starting with 304 stainless flanges to a 70mm stainless midsection and vibrant stainless 18" resonator. Then we incorporate a smooth tapered conical section to increase the piping size to 70mm and use a Vibrant Tail Section. Excellent sound quality, great power increases with the tapered piping and sizing. All handbuilt and TIG welded by 2JR. Will fit over your OEM Midpipe. This exhaust is very quiet on your AWD CVT. You have the option to add the center resonator for $45 if you prefer it quiet. Or run without the center resonator for 8db more sound. Nismo Style Rear Tip - fits perfectly on all models. Sound clips here! This is with our AWD Downpipe and midpipe combo https://www.youtube.com/watch?v=HuOkFKFEDq0&feature=youtu.be&fbclid=IwAR3juZs_WoCSYaSQEtoPnvZ9IUvmd_rq1cLABeTzHmVbr5PO6WmOqIKsCTI Learn More -
Juke AWD Downpipe (2011-2014 & RS)
Regular Price: $479.00
Special Price $398.78
Juke AWD Downpipe (2011-2014 & RS) 2011-14 and all Nismo RS models 2JR releases their Juke Downpipe for the Nissan Juke with huge upgrades over the prev version. New stainless encased flex section, thicker 1/2" flanges, all 304 Brushed stainless. If you want to make big power, this is the upgrade for you. Free flowing turbo spool, less lag and more response. Direct Fitment - no modifications to the exhaust or engine required. Optional defouler to help assist the the check engine light. NOTE REUSE YOUR OEM LOWER BRACKET AS SHOWN IN PICTURES. Learn More -
Juke FWD Downpipe (2011-2014 & RS)
Regular Price: $479.00
Special Price $398.78
Juke FWD Downpipe (2011-2014 & RS) 2JR releases their Juke Downpipe for the Nissan Juke with huge upgrades over the prev version. New stainless encased flex section, thicker 1/2" flanges, all 304 Brushed stainless. Now includes billet aluminum bracket to limit exhaust flex under load. A defouler is not required with this downpipe. If you want to make big power, this is the upgrade for you. Free flowing turbo spool, less lag and more response. Direct Fitment - no modifications to the exhaust or engine required. Up to 305wtq - stock turbo +330wtq - Mamba 21TK +440 whp - Garrett G Series Turbo Learn More -
Juke AWD Axle Back Exhaust - Carbon Fiber
Regular Price: $289.99
Special Price $249.78
Juke AWD Axle Back Exhaust - Carbon Fiber Fits All Years / All Models of the AWD Juke - inc Nismo Specs: 2.5" Stainless Steel with Resonated Carbon Blue/Gold Tip Includes bolts and gaskets Bolts on your OEM factory exhaust / No fabrication required Increases sound levels by 8-9db over stock 16lb weight savings 1 Week build time after order is placed Learn More -
Nissan Juke FWD Midpipe
Regular Price: $299.99
Special Price $269.78
Nissan Juke FWD Midpipe Application: Nissan Juke FWD Front Wheel Drive - CVT and Manual SV, S and RS Models Years: 2011 to 2017 Material: Stainless Steel / Polished Size: 70mm Defouler included in the midpipe for no check engine luight 2JR introduces their 70mm Full 304 Stainless Steel Midpipe for the FWD Nissan Juke. Gains over 20wtq and 15whp without a tune!! Made from 4mm thick 304 Stainless Steel for long life, corrosion resistance and strength in the harshest environment. Direct bolt on with no modification required. And no check engine light because an 02 Spacer is built in to the midpipe! Removes the second cat in the midpipe - the primary cat remains in the downpipe. No smell, no noise - and over 20wtq!! Learn More -
Limited FWD Juke 3" Stainless Catback Exhaust
Regular Price: $829.98
Special Price $749.78
Limited FWD Juke 3" Stainless Catback Exhaust - Full Stainless Steel - Thicker Piping for less Drone and Improved Sound - Large Front Resonator Specs: Juke 2011 to Current Models. All ranges (S, SV, RS, Nismo) - FWD ONLY Mates to 2JR Midpipe Size: 3.0" Learn More -
ARP Stainless Steel Exhaust Stud Kit - Juke Downpipe
Regular Price: $82.68
Special Price $68.77
ARP Stainless Steel Exhaust Stud Kit - Juke Downpipe Specs: M10 X 1.25/1.50 X 48mm, SS, 4 pieces Threads on Juke Turbo Hotside and Juke Turbo Manifold - M10x1.50 Learn More -
2JR FWD Juke 70mm Stainless Catback Exhaust
Regular Price: $789.99
Special Price $698.78
Out of stock
Fits Gen1 and Gen2 FWD Juke Models Performance to blow your mind, not your ears! Improve your FWD Juke's performance with this cat-back exhaust system from 2JR. We took on the task of finding the perfect balance between maximum performance increase and a responsible noise level to appeal to Juke enthusiasts of all levels. All 2JR Exhaust products are direct replacements for factory exhaust systems, meaning no modifications are required for proper fitment - this includes our downpipe, midpipe and catbacks. This cat-back exhaust system is manufactured of a 70mm T304 anti-magnetic stainless steel that is less susceptible to discoloration when compared to other systems found on the market. This quality T304 stainless steel is used on all of the pipework including the construction of the mufflers and resonators. Mandrel bending ensures full flow bends for better exhaust gas flow and 2JR systems are increased in bore (70mm) to ensure the ultimate performance without the loss of mid-range torque. This is the perfect size for the MR16 engine. This catback exhaust powers our own Juke to over 360ft lbs and 300hp. Exhaust tone has ZERO rasp, excellent tone quality without being loud - even with our catless downpipe and midpipe. Fit all years - Juke 2011 to Current Models. All ranges (S, SV, RS, Nismo) , with turbo 1.6 MR16DDT. Will NOT fit AWD Models. Fits 2JR, Stock and Injen midpipes Kit Includes: Resonated mid pipe Polished Rear muffler Polished GT80 tip Installation hardware (vibrant clamp, hardware) Learn More -
MagnaFlow 2014-Current Nissan Juke L4 1.6L Turbocharged Straight D/S Rear Exit Stainless Cat-Back Perf Exh
Regular Price: $666.90
Special Price $624.99
Made in the USA and engineered to last, for those seeking increased performance and better economy, MagnaFlow MF Series Performance Exhaust systems deliver the smooth deep sound you want and the wide-open performance power you need. Our exhaust systems feature straight-through flow designs for the ultimate in unrestricted horsepower and torque for big power while maintaining exhaust efficiency. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. Learn More -
FWD Injen Nissan Juke 1.6L 4cyl Turbo (incl Nismo) SS Cat-Back Exhaust
Regular Price: $999.89
Special Price $929.89
Injen Technology’s Super SES line of exhaust systems are dyno-tuned to compliment our performance intake systems; in doing so, the Super SES provides maximum horsepower and torque across the power band. The Super SES exhaust system is manufactured from 100% 304 stainless steel. Each exhaust system features CNC mandrel-bent stainless steel tubing, CNC machined flanges, and robotic TIG welding. FWD ONLY *Features* * 100% Stainless Steel Construction * Straight Through Muffler Design * Robotic Tig Welds * Injen’s Unique Flared Tip Design Learn More -
GReddy FWD Nissan Juke Evolution GT Exhaust
Regular Price: $700.00
Special Price $665.79
The evolution continues with new GReddy EVOlution GT exhaust line. Improved and refined, this latest generation of Evo exhaust incorporates our new high flow straight-through internals and limited lifetime warranty. It also retains the benefits of the compact and efficient, offset-tip design of the previous Evo’s muffler. Each EVOlution GT is carefully constructed from precision TIG welded, high quality 304 stainless-steel. High flow with a deep rich exhaust note is what the GReddy Evo line is know for. For FWD Jukes - all years Learn More -
AWD Injen Nissan Juke (incl Nismo) Polished Stainless Steel Catback Exhaust
Regular Price: $949.78
Special Price $899.78
Injen Technologys Super SES line of exhaust systems are dyno-tuned to compliment our performance intake systems; in doing so the Super SES provides maximum horsepower and torque across the power band. The Super SES exhaust system is manufactured from 100% 304 stainless steel. Each exhaust system features CNC mandrel-bent stainless steel tubing CNC machined flanges and robotic TIG welding. Fits AWD ONLY Learn More -
Hard Race Exhaust Hangers (Set of 4)
Regular Price: $29.87
Special Price $22.99
Hard Race Exhaust Hangers (Set of 4) Fits Nissan / Toyota / Subaru / Ford Dimensions: Length: 2-7/8, Width: 1-7/8, Height: 13/16. 12mm Holes * use Brake Cleaner to aid in installation (acts as a quick drying lubricant) High Durometer EPDM material with better abrasion resistance, high-temperature resistance and strength 1. Strong Lateral (side load) control 2. Reduce the height and contact surface b/w exhaust and chassis 3. Dampens vibrational interference b/w the hanger and exhaust Learn More -
02 Sensor 90° Catted De-fouler - Stainless Steel
Regular Price: $35.00
Special Price $26.00
Assists in removing the cat code by spacing out your secondary 02 Sensor. Fits on all 2JR Downpipes and midpipes (Sentra, Juke, Fiesta, Focus, Etc) made from Stainless Steel. Learn More -
02 Sensor De-Fouler - Stainless Steel
Regular Price: $17.99
Special Price $12.99
Assists in removing the cat code by spacing out your secondary 02 Sensor. Fits on all 2JR Downpipes and midpipes (Sentra, Juke, Fiesta, Focus, Etc) made from Stainless Steel. Learn More
16 Item(s)
Grid List