Turbo / Intercooler / Hard Piping
12 Item(s)
Grid List
-
Injen 11-14 Nissan Juke 1.6L Turbo 4 cyl (incl Nismo) Upper Intercooler Pipe Kit
Regular Price: $489.67
Special Price $469.78
Intercooler Piping Kit; Upper IC Piping; Incl Machined BOV Flange & Sensor Flange; Incl Clamps & Silicone Hoses Color - Polished or Black Injen Intercooler Piping Kits are the new standard on high performance turbocharged vehicles. Utilizing T6 60601 Aluminum you can be sure your turbocharged motor will be breathing the coolest and most consistent air. Bolt on kits include all necessary hoses and couples for easy installation! Learn More -
2015+ Hard Intercooler Piping Kit (Gen 2 MR16) B17 Sentra Turbo/Juke
Regular Price: $329.99
Special Price $199.78
Fits all 2015 and up Nissan Jukes - EXCEPT Nismo RS and fits all B17 Sentra Turbo/Nismo/SR For the Gen2 Juke MR Engine As with all intercooler hard-pipe kits, the stock plastic pipes to and from the intercooler are replaced with solid pipes to eliminate distortion under boost. But the devil is in the details, and that is where similarities end. The 2JR V2 MR16DDT Hard-Pipe Kit consists of mandrel pipes made from aluminum tubing on both the cold side and hot side of the intercooler. The results are hard pipes from the turbo outlet to intercooler inlet and from the intercooler outlet to the throttle body, without unsightly mid-pipe silicone hose couplings that can disrupt flow or potentially blow off under boost. The hot and cold pipe diameters are increased from the stock 2.5" and 2.25", enhancing flow even further. We used custom 2.6" couplers to fit over the OEM intercooler and Throttle Body so no special attachment was required. Piping is available in polished, wrinkle red or black. Includes both Hot and Cold side piping, couplers and clamps. Hot side piping now comes with thicker flanges at the turbo and welded inside so the OEM nut fits flush and flat for a tight seal. Simple install in 1hour with hand tools. Learn More -
2JR Hard Piping Kit for 2011-2014 Nissan Juke and RS (all years) - V1 Motor
Regular Price: $389.00
Special Price $329.98
As with all intercooler hard-pipe kits, the stock plastic pipes to and from the intercooler are replaced with solid pipes to eliminate distortion under boost. But the devil is in the details, and that is where similarities end. The 2JR V1 MR16DDT Hard-Pipe Kit for the 2011-2014 Juke and RS consists of mandrel pipes made from aluminum tubing on both the cold side and hot side of the intercooler. Not only are these more durable and look incredible, but the piping size is increased over stock and there is no flex under heavy boost loads. Includes all couplers and clamps for a proper install on an OEM intercooler. Piping is available in polished, wrinkle red or black. NOTE: Powdercoating may add 3 weeks to delivery time. Includes both Hot and Cold side piping, couplers, and clamps. Fitment: Fits all V1 Engine Jukes (2011-14) for both AWD and FWD, this includes ALL YEARS for the Nismo RS model which still uses the V1 motor after 2014. Simple install in 1hour with hand tools. Learn More -
GFB G-FORCE III Electronic Boost Controller
Regular Price: $387.98
Special Price $369.78
Internal MAP sensor handles boost pressure up to 50psi (3.45bar, 345kPa) Still class leading performance! Improved scramble boost feature with remote switching capability Scramble boost now uses a dedicated boost preset (instead of a percentage increase) so that peak boost, rise rate, and closed-loop control can be specifically tailored to suit your needs when activated. You can now lower OR increase boost pressure, AND change the spool-up rate and correction, all at the press of a button. 6 boost presets, individually programmable You can program 6 different peak boost pressures and rise rates, then select on-the-fly
New peak-hold display Shows the peak boost achieved after each boost run Remote input trigger Connect the remote input wire to a switch, button, or ECU output to change boost presets or activate scramble boost
- Real-time boost gauge; display in bar, psi, or kPa Choose the gauge display pressure units to suit your preference
- Real-time vacuum display Now shows manifold vacuum as well as boost
- Over-boost warning/cut User adjustable warning to indicate if the boost pressure is too high and to cut the solenoid to lower boost and protect the engine
-
Nissan Juke MAMBA Billet Turbocharger Upgrade MR16DDT (Gen 1) 21TK
Regular Price: $1,199.00
Special Price $1,099.00
21TK Series Nissan Juke MAMBA Billet Turbocharger Upgrade MR16DDT (Gen 1) - Fits all Gen 1 Motor Jukes to 2014 and all Nismo RS Models (all years) Supports 280~350HP Complete CHRA balanced by SCHENCK MBRS110 Germany 0.8bar spring pre-installed on the adjustable actuator. 1.2bar and 1.5bar spring included. We suggest installing the 1.5bar for manual Jukes. 1.2bar spring for CVT jukes. An UpRev (2JR) tune is suggested Supporting mods (for the most power gains): Downpipe, Midpipe and Catback. Intake, Hard Pipe Kit, BOV and FMIC Includes all upgrades gaskets, lines and fittings. Learn More -
Juke "Sprint Series" Front Mount Intercooler Kit
Regular Price: $949.99
Special Price $729.98
Juke "Sprint Series" Front Mount Intercooler Kit 2JR Sprint Series FMICs are designed to be used on the street or track with no limitations in performance and to be a complete drop in kit. Can be used with Stock OEM Nissan Intercooler piping or Injen to 2JR hardpiping kit. Features and Benefits: - Direct fit for the 2011-2015 Nissan Jukes (CVT, 6MT, FWD and AWD) - all RS models all years - 27" Long intercooler design optimized for maximum flow - No modification to front bumper and retains stock fog lights - Maximum cooling efficiency with minimal pressure drop - Max power gains of 19HP and 22 feet per pounds of torque - Drops intercooler outlet temperatures by 38°F - Increases core size by 138% and fin surface area by 42% All the hardware required to complete your installation is likewise included. Learn More -
Thermal Turbo Blanket for Juke OEM / Mamba Turbos
Regular Price: $139.29
Special Price $129.99
Torque Solution Thermal Turbo Blankets are highly effective at protecting components around your turbo by effectively blocking the heat produced by the hot back housing. Our blankets are made of protective wire mesh, insulated fiberglass layers, and an external crushed volcanic lava rock layer. The blanket fits all OEM Juke turbos, as well most small frame internally gated turbos - like the Mamba. Fits All Juke Years / Inc Mamba Turbos Learn More -
Nissan Juke Oil Feed Line - Turbo
Regular Price: $89.95
Special Price $68.39
Juke Oil Feed Line - (2011-2014) and all RS models (any year) Replacement Oil Feed Line for your Gen 1 Nissan Juke. Its very common for this line to become clogged over time and damage the turbo. Don't take a chance and replace it with a new line, hardware and copper seals. Install time is approx 30m and best performed during an oil change. It is also recommended to add a catch can to capture and filter the oil blow by before it enters back into your engine. Learn More -
2JR Nissan Juke Engine Intercooler Hose Kit (2011-2014 and all RS years)
Regular Price: $78.77
Special Price $69.98
IN STOCK!! Now Shipping 2JR begins their worldwide release of Juke parts with their high grade hose kit for the Gen1 (2011-2014) Juke. Fits all models. Race Proven! Designed for High Temperature (330deg), High Boost Applications. Won't swell or burst under extreme conditions . 2JR Hose Kits are made with a 4 Ply Reinforced Silicone combined with Nomex-like material to provide superior heat reduction and pressure tolerance over the OEM Nissan hoses. The 2JR Kit is a direct replacement for your OEM hoses and installs with simple hand tools. Excellent way to dress up your engine bay on the Juke. Available in multiple colors. Color Choices: Outside / Inside Red / Blue Blue / Red Application: 2JR Nissan Juke Engine Hose Kit (2011-2014 and al RS years) Ships Worldwide! Learn More -
T25 Turbo Adapter / Gen1 MR Engines
Regular Price: $269.00
Special Price $249.00
T25 Turbo Adapter / Gen1 MR Engines Designed to allow users of Gen1 MR16DDT engines (or those with the Gen1 Juke Turbo Manifold (2011-2014 / all RS Years) to mount a T25 Turbo to the factory manifold. Includes stainless hardware. This is the same adapter used in our 500hp Juke Builds. Confirm fitment on Pulsar, etc type vehicles. Material: Stainless Steel Adapter Size: T25 Learn More -
OEM Turbocharger - Nissan Nismo RS (14411-1KC1E)
Regular Price: $987.19
Special Price $689.78
OEM Turbocharger - Nissan Nismo RS (14411-1KC1E) This turbocharger does not include hardware, gaskets, heat shields, or other additional pieces. These must be purchased separately or recycled from your old turbo. Genuine: Nissan OEM SKU: 14411-1KC1E Other Names: Turbo Charger Description: Fits Juke Juke. From 08/2011-2014 and all nismo rs. Condition: New Replaces: 14411-1KC1B, 14411-1KC1C, 14411-1KC1D Sold In Quantity: 1 Learn More -
UpRev MAF GT
Regular Price: $399.98
Special Price $379.98
UpRev MAF GT The UpRev MAF GT is an upgraded sensor for Nissan Vehicles. The sensor retains the same connector and pin-out as vehicles using the following part numbers Fits 2004-2012 QR25DE Sentra / Altima and Frontier 2003-2017 350/370Z 2011-2017 Nissan Juke Nissan – 22680-7S000 Hitachi – W0133-1723137 Hitachi – MAF0031 This sensor is not a factory replacement, ECU calibration is required in order to use the UpRev GT MAF. The GT MAF voltage scale has been changed to suite higher airflow and so the ECU should be calibrated to suit the different voltage curve. This MAF is capable of reading up to 600hp on a factory 350Z VQ35DE MAF housing, can read higher numbers with a bigger MAF housing. 3" or Larger MAF housing is preferred. Learn More
12 Item(s)
Grid List