Customer Reviews
6 Item(s)
per page
- good purchase Review by Steve
- simple enough to install, wish I got the delrin crossmember bushings too. Mine are pretty much non-existent, using metal washers for now to make up for the gap. Lol. The engine feels nice and tight now. (Posted on 5/30/2020)
- Easy, works, cheap Review by Aki
- Engine moves much less, better launch, much less wheel hop. Bought a boosted B15 that hadn't been fully run since build (<500 mi), virtually new condition. Lacked some touches, like the engine rocked quite a bit even when just revving engine at idle. Put these in, in my garage, wheel ramps, only hand tools, in about an hour. If you were doing it a second time it might take 30 min. Super easy, mounts sandwich the OEM mounts so no pressing, no hard work. I was extra careful, cleaned all parts I took off, so it took longer than it should. (Posted on 5/10/2019)
- Excellent and Easy to Install Review by Eric
- Agreed with Matt. Install was easy. Took me a little under an hour. Impact wrench and torque wrench are recommended. Breaker bar also nice to have. Instantly felt much more controlled under acceleration. 6 bolts. I was putting in midpipe at the same time so that was it of the way. (Posted on 6/22/2018)
- Fantastic Review by Youngblood
- A great way to stop wheel hop. Not nearly as unforgiving as solid motor mounts. (Posted on 9/17/2016)
- Perfect Review by Anthony
- Had these in for 2-3 months and you notice the good response on pick up with your motor. Love it (Posted on 12/11/2015)
- must have Review by Matt
- These inserts are easy to install, about an hour if you're doing it on the ground with hand tools. I took my car for a ride and the first thing I noticed is how much smoother the ride felt without the motor jiggling around over bumps. Next I did a launch test from a dead stop, it's like a different car, no wheel hop at all. You can actually feel the car grabbing traction and the lsd working. The car also seems to shift smoother as well. Vibration is noticeable at idle and between shifts when you push the clutch in, but I feel the benefits you gain make it worth it. I have a bsr too so that might add to the vibration some. (Posted on 9/28/2014)
6 Item(s)
per page