Customer Reviews
4 Item(s)
per page
- Makes the Mishimoto rad even better Review by Corey
-
Got this fan shroud because I also got a Medusa header and the Mishimoto radiator and oooooh, this thing is nice!
The unit mates to the Mishimoto radiator with a few bolts and a couple tabs at the bottom, very simple to put together and looks really nice when all put together and installed, together with the radiator, both work together to bring temps down and keep things running nice and cool, it came with some foam weather seal to make a better seal between the shroud and the radiator, but I ended up not needing it because of how well it all fit together.
Wiring the unit was a little confusing to find info on, but its really easy, you just take the two ground wires and two positive wires coming from the harness on the stock fan connector and splice them together, then splice those into the negative and positive wires on the cable coming from the fan shroud negative to negative, positive to positive. Looking at the stock connector on the wiring harness side, If you are holding it with the clip facing up, the two wires under that are positive and the two wires on the opposite side of the connector are the two negative wires, do this for both stock fan connectors. (Posted on 10/3/2020) - Great quality unit Review by David
- The shroud and the fans are great quality, and move a lot of air. One of the reasons I choose Mishimoto over other brands is they give you a lifetime warranty on the part. Its even covered from accidents. Install is pretty straight forward. Use the plug ends off your existing fans. Wire the two positive wires and the 2 ground wires on the plug end from your stock fans to the single blue(positive) and single black(ground) that are on the fans for the puller setup. Will have to add the mishimoto radiator soon just because of how impressed of the quality these fans are. (Posted on 7/21/2017)
- Damn good. Review by Torretto
- Needing to cool down better get these. Worth every cent. Highly recommended. (Posted on 9/22/2016)
- Good combo with radiator! Review by Sean
- Combined the Mishimoto radiator, Mishimoto shroud kit, 2JR complete silicone hose kit, and the 2JR billet aluminum radiator supports. Everything fits nice and snug with Medusa header. Fan seems to be doing what its supposed to. (Posted on 6/16/2016)
4 Item(s)
per page