Exhausts/Headers

E210 Sedan Magnaflow Carbon Catback Exhaust Are you looking for a supremely bad ass Magnaflow Catback for your E210 sedan? Full 2.5" Stainless Steel? Then is one is for you. Custom built and hand tig welded only using the highest quality stainless piping and flanges. Fits to the OEM Corolla Midpipe or 2JR Midpipe and Header for the most power, sound and performance. Features: Magnaflow Muffler 2JR Carbon Resonated Tip (Blue/Gold) Stainless Piping with Flex Section E210 Sedan ONLY - Manual or CVT fits Learn More

E210 Gold Ceramic Header Cerakote gold coating keeps underhood temps down and gains in performance with improved scavenging of exhaust gases. UEL Design / Stainless Steel with EGR Port. Incredible power gains, amazing sound ! It comes complete ready to drop in, no modification required. Fits on the OEM midpipe or 2JR Midpipe. Now includes stainless steel gasket at the header to manifold (engine). Fits Sedans/Hatchback 2.0L Only NOTE: Scavenging is the process of replacing the exhaust gas in a cylinder of an internal combustion engine with the fresh air/fuel mixture (or fresh air, in the case of direct-injection engines) for the next cycle. Learn More

Released in limited quantities, a Quad Carbon Catback is now available for your E210 sedan. No rasp, just deep, clean sound and big performance gains. Stand out from the crowd. Built with only the best parts available - including twin Vibrant Ultra Quiet Mufflers, 2.5" Stainless Steel piping and integrated flex section. Designed to fit your OEM or 2JR Midpipe (inc the 2JR Header). Fits to the OEM Corolla Midpipe or 2JR Midpipe and Header for the most power, sound and performance. NOTE: YOU MUST TRIM YOUR BUMPER TO FIT ON THE DR SIDE. REMOVE THE OEM REAR HANGER (pass side) AND RUBBER GROMMETS (dr side) IN THE FRAME RAIL. USE THE INC'D 2JR BOX HANGERS AND 10x1.25 FINE THREAD BOLTS IN THE FRAME RAILS TO HOLD THE BOX HANGERS IN PLACE. Threaded holes exist in these locations. DO NOT USE THE 10x1.5 BOLTS IN THE FRAME RAILS Features: Twin Vibrant Mufflers 2JR Quad Carbon Tips (Slash w/Logo) Stainless Piping with Flex Section E210 Sedan ONLY - fits Manual and CVT Learn More

2JR Header + Race Catted Midpipe Exhaust Power Package - Stage 2 2JR V2 Brushed Stainless Header - In Stock 2JR V2 Brushed Stainless Catted Race Midpipe - In Stock 2JR Stainless Catted Defouler (for midpipe) - In Stock Header + Race Midpipe combo from 2JR ensures you get the highest performance out of your E210 hatch. Midpipe comes with a catted defouler however we highly recommend a tune to keep off the check engine light. The catted defouler works best when 91 or 93 octane fuel is used - however it is only about 60% effective. A tune is always best. All piping is brushed stainless and tig welded to perfection. You can also opt for the ceramic coated headers when you checkout. Note: Our Midpipe does not fit Borla Brand Catbacks - they use a loose flange at the start of their catbacks that will not mate up to the 2JR Midpipes. You will have to weld the Borla Catback flange to the catback to make it work. Learn More

Limited Run of Catted/Resonated Midpipes for the E210 Hatch and Sedan. Made from 304 Stainless Steel and mandrel bent to ensure the highest flow then paired with a stainless flex section and resonator to reduce rasp and noise. Will fit on the OEM and aftermarket exhausts as well as 2JR and OEM headers. Includes rear gasket, bolts and nuts. CNC Front Flange for Track Abuse Smaller Core / Free Flow Cat Race Spec Resonator / Preforated Caged Rear Flex Section for Hard Launches Made by 2JR and hand welded to perfection. We use only the best exhaust components for a complete full stainless system. Stainless perforated core for extra long life. Sounds absolutely AMAZING Fits Sedan and Hatchback Note: Does not fit Borla Brand Catbacks - they use a loose flange at the start of their catbacks that will not mate up to the 2JR Midpipes. You will have to weld the Borla Catback flange to the catback to make it work. Learn More

E210 Cerakote Ceramic Header - In Stock Cerakote silver coating keeps underhood temps down and gains in performance with improved scavenging of exhaust gases. UEL Design / Stainless Steel with EGR Port. Incredible power gains, amazing sound ! It comes complete ready to drop in, no modification required. Fits on the OEM midpipe or 2JR Midpipe. Now includes stainless steel gasket at the header to manifold (engine). Fits Sedans/Hatchback 2.0L Only Note: Scavenging is the process of replacing the exhaust gas in a cylinder of an internal combustion engine with the fresh air/fuel mixture (or fresh air, in the case of direct-injection engines) for the next cycle. Learn More

E210 Brushed Stainless Header - In Stock UEL Design / Stainless Steel with EGR Port. Incredible power gains, amazing sound! It comes complete ready to drop in, no modification required. Fits on the OEM midpipe or 2JR Midpipe. Now includes stainless steel header to manifold (engine) gasket Fits Sedan/Hatchback 2.0L Only Learn More

(Sedan) Borla Corolla SE/XSE S-Type Catback Fits only Sedan SE/XSE models (E210 Corolla) Sound: S Type (mild) Tips: Dual Round Rolled Angle-Cut 2" Stainless Piping Learn More

E210 Borla Resonated Midpipe (Hatch/Sedan) Ultra Quiet Very Limited Production The quietest performance midpipe for your E210 Hatch or Sedan is now available in very limited quantities. 2JR pairs the largest Borla available with the option to add a high flow cat, allowing all the performance gains from a 2.5" midpipe (up from 1.6" stock) and none of the noise or rasp. Removes the rasp from your Remark or other catback to tame the loudness while driving. Made from 304 Stainless Steel and mandrel bends then tig welded to perfection. Will fit on the OEM and aftermarket exhausts as well as 2JR and OEM headers. Includes rear gasket, bolts and nuts. Fits Sedan and Hatchback Note: Does not fit Borla Brand Catbacks - they use a loose flange at the start of their catbacks that will not mate up to the 2JR Midpipes. You will have to weld the Borla Catback flange to the catback to make it work. NOTE: Production Time is 2-3 Weeks after the order is placed Learn More

2JR Extreme XL Titanium Axleback (Sedan)

We proudly carry exclusive performance titanium exhaust options brought to you by Vibrant and Ticon. Made at our facility for your E210.

Can't decide if you want to hang this on your living room wall or on your E210? We get it, and we certainly won't argue with your choice. This is 2JR's Extreme XL Titanium Axle Back Exhaust System for the E210 Sedan.  Featuring titanium construction for the axle back and stainless steel front and midsections. The axle back Ti section combines a Vibrant Full Ti XL Muffler with smooth bends which also feature JDM-inspired pie cuts. The result is more horsepower and torque, a good amount in weight savings, all while producing a race-inspired exhaust note. A great investment for your daily driver, weekend show car, or purpose-built race car as it is an exclusive part that will add style, value, and performance.

Fits all Sedan Models

MUST READ!!! IF YOU CURRENTLY OWN A 2JR MAGNAFLOW CATBACK WHERE THE FRONT 2 SECTIONS OF PIPING MATCH THE PHOTO - YOU CAN DELETE THE PIPING AND ORDER THE AXLE BACK PORTION ONLY.  IF YOU ARE UNSURE OF WHICH KIT YOU HAVE - SEND US AN EMAIL AND WE WILL CONFIRM WITH YOU BEFORE SHIPPING YOUR ORDER.  IF YOU HAVE THE QUAD CARBON SEDAN CATBACK, YOU WILL NEED TO ORDER ALL THE PIPING.

HIGHLIGHTS:

Full titanium 2.5" piping diameter - axle back portion
Vibrant XL Ti Muffler
1mm Main pipe thickness
Stainless Steel Mid and Front sections
6mm Flange thickness
Racing Layout - minimal bends and curves allow exhaust gases to escape quickly
Dry Race Sound - provides a true race exhaust sound that titanium materials can provide
New hardware and gasket will be provided to make this exhaust system ready for the installation

Learn More

2JR Extreme Titanium Axleback (Sedan)

We proudly carry exclusive performance titanium exhaust options brought to you by Vibrant and Ticon. Made at our facility for your E210.

Can't decide if you want to hang this on your living room wall or on your E210? We get it, and we certainly won't argue with your choice. This is 2JR's Extreme Titanium Axle Back Exhaust System for the E210 Sedan. Featuring titanium construction for the axle back and stainless steel front and midsections. The axle back Ti section combines a larger piping diameter with smooth bends which also feature JDM-inspired pie cuts. The result is more horsepower and torque, a good amount in weight savings, all while producing a race-inspired exhaust note. A great investment for your daily driver, weekend show car, or purpose-built race car as it is an exclusive part that will add style, value, and performance.

MUST READ!!! IF YOU CURRENTLY OWN A 2JR CATBACK WHERE THE FRONT 2 SECTIONS OF PIPING MATCH THE PHOTO - YOU CAN DELETE THE PIPING AND ORDER THE AXLE BACK PORTION ONLY.  IF YOU ARE UNSURE OF WHICH KIT YOU HAVE - SEND US AN EMAIL AND WE WILL CONFIRM WITH YOU BEFORE SHIPPING YOUR ORDER

HIGHLIGHTS:

Full titanium 2.5" piping diameter - axle back portion
4" tip size / Stainless Steel Slip On Design
1mm Main pipe thickness
Stainless Steel Mid and Front sections
6mm Flange thickness
Racing Layout - minimal bends and curves allow exhaust gases to escape quickly
Dry Race Sound - provides a true race exhaust sound that titanium materials can provide
New hardware and gasket will be provided to make this exhaust system ready for the installation

Learn More

Titanium Extreme Sedan Apex Catback (Quad) Released in limited quantities, a Titanium Extreme Sedan Apex Catback (Quad) is now available for your E210 sedan. No rasp, just deep, clean sound and big performance gains - we use Ticon Industries Titanium Ultra Quiet Mufflers and all Titanium Tail Section to either quad polished or quad carbon tips. Built with only the best parts available - including twin Vibrant Ultra Quiet Mufflers, 2.5" Stainless Steel piping and integrated flex section. Designed to fit your OEM or 2JR Midpipe (Race or Borla) Add the 2JR Midpipe and Header for the most power, sound and performance. NOTE: YOU MUST TRIM YOUR BUMPER TO FIT ON THE DR SIDE. REMOVE THE OEM REAR HANGER (pass side) AND RUBBER GROMMETS (dr side) IN THE FRAME RAIL. USE THE INC'D 2JR BOX HANGERS AND 10x1.25 FINE THREAD BOLTS IN THE FRAME RAILS TO HOLD THE BOX HANGERS IN PLACE. Threaded holes exist in these locations. DO NOT USE THE 10x1.5 BOLTS IN THE FRAME RAILS HIGHLIGHTS: Full titanium 2.5" piping diameter - axle back portion Quad tips size / Stainless Steel Slip On Design 1mm Main pipe thickness Stainless Steel Mid and Front sections 6mm Flange thickness Racing Layout - minimal bends and curves allow exhaust gases to escape quickly Dry Race Sound - provides a true race exhaust sound that titanium materials can provide New hardware and gasket will be provided to make this exhaust system ready for the installation E210 Sedan APEX ONLY - fits Manual and CVT Learn More