Intakes

Fits: E210 Sedan and Hatch 19-22 Gains - 15whp / 11wtq 2JR introduces a true cold air intake for the 2.0L 19-22 Corolla (hatchback and sedan) with a 4db increase in induction noise. We place the filter behind the front bumper for the coldest ambient air while being protected from rain/water and the elements and add a taper to increase air flow. Includes High Flow filter and optional filter sock. You will need to trim your plastic radiator core trim panel. Additionally -93 oct is preferred for the best performance. NOTE: This intake pulls in a lot of air due to its design and location. We recommend never running in ECO mode. After install, reset the ECU by disconnecting the battery for 5min. Let the car idle for 5min then drive normal for 30min before smashing! Install time - 60min. 3" Piping with tapered section for increased flow. NOTE: All hoses, clamps and filter are included in the kit. TEMPLATE - download for cutting the plastic trim https://1drv.ms/u/s!AjQkUN52fS1SkZFgc11s4QKniNaBbQ Does not fit 2023 Corolla. Learn More

Injen 2019+ Toyota Corolla 2.0L Black Cold Air Intake Fits both the sedan and hatchback Additionally, the SP2081 intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Learn More

AEM +19 Toyota Corolla 2.0L Intake 7 IN STOCK! Fits the hatchback and sedan The AEM Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. Learn More

K&N +19 Corolla 2.0L Typhoon Short Ram Intake Fits both the sedan and hatchback Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Learn More

aFe Silver Bullet Throttle Body Spacer 19-21 Toyota Corolla L4 2.0L - Black The serrated/helix design creates air turbulence in the intake manifold. This turbulence increases the air pressure in the combustion chamber, resulting in increased performance and improved throttle response. The serrated/helix combination design also reduces intake whistle that occurs with helix-only designs (US PAT 07055513). This Silver Bullet throttle body spacer is precision machined from 6061-T6 billet aluminum for lightweight, high strength, and perfect fit and finish. It features a black anodized finish. This Silver Bullet throttle body spacer uses all factory mounting locations, making for a hassle-free installation. A supplied gasket provides a perfect seal. Learn More

Injen 2019+ Toyota Corolla 2.0L Polished Cold Air Intake Fits both the sedan and hatchback Additionally, the SP2081 intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Learn More

Takeda Momentum Cold Air Intake System w/ Pro 5R Media Fits sedan and hatchback 2.0L This 7-1/2” tall 360-degree radial flow air filter features a 3-1/2" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The smooth one-piece sealed housing is constructed of heat-resistant cross-linked polyethylene (XLPE). A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. An auxiliary air inlet can be used, or closed with a supplied plug. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system. Learn More