Sentra SR / Nismo Turbo

Sentra SR / Nismo Turbo

Items 1 to 10 of 15 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction
  1. 2JR Nismo/SR and Juke V2 Front Mount Intercooler

    2JR Nismo/SR and Juke V2 Front Mount Intercooler

    Regular Price: $899.00

    Special Price $699.00

    2JR Front Mount Intercooler for the Nismo / SR Sentra (MR16DDT - Turbo) and V2 Engine Jukes (+2014 MR16DDT). Will NOT fit Juke RS Models. While dyno testing our Nismo Sentra, we noticed a massive increase in Charge Air Temps in the upper RPM's. The OEM intercooler was built to barely support the OEM power levels. With the increase in power/boost, it simply just cannot efficiently cool the charged air. Leading to power loss resulting from timing corrections with the ECU and less dense intake charge (less power). Our 2JR Intercooler was built to combat this problem. Our data logs showed us a 26-35 degree Fahrenheit drop. After confirming our the data, we went ahead and designed an intercooler to maximize the available space behind the bumper. A tune IS NOT REQUIRED to run this FMIC. We do recommend an intake and midpipe with the FMIC Features: - 100% Bolt On - No cutting / trimming or bumper modifications necessary - can be installed in 3 Hours or less - Stainless Steel brackets / all couplers / clamps included - Rated up to 550hp - Custom cold side piping created to shorten the distance bw the FMIC and TB for quicker response - Less than 2psi pressure drop from tank side to tank side - Custom Color Choices are Available for the PIPING ONLY. Recommended Parts: - 2JR Intake - 2JR Midpipe Optional Parts: - 2JR Catback Learn More
  2. B17 Sentra Camber Bolt Kit (Set)

    B17 Sentra Camber Bolt Kit (Set)

    Regular Price: $24.99

    Special Price $21.25

    Fits all B17 Models - inc Nismo and SR EZ Cam XRs are designed for non-slotted struts. They allow both positive and negative camber changes up to approximately 1.75° (depending on vehicle) by replacing the upper O.E. strut/spindle bolt. This easy to use adjuster provides built-in adjustment over the life of a vehicle just by rotating the head of the bolt. *Each EZ Cams each kit contains TWO pieces.* Learn More
  3. B17 Sentra RS-R Spring Set

    B17 Sentra RS-R Spring Set

    Regular Price: $219.00

    Special Price $199.00

    Fits all B17 models including the SR Turbo and Nismo The RS-R Down Sus provides a lowered stance and improved handling to fulfill your needs to lower your car and improve its handling. Taking into consideration the factory suspension geometry, shock dampening, spring rate and ride height levels, RS-R ensures that the springs you are getting were made for your car both for performance and for comfort. PartNumber rsrN205D Description Down Sus Springs Lowering (F/R) 30-35mm / 30-35mm Spring Rate (F/R) 2.39kg/mm / 3.95kg/mm Learn More
  4. B17 Sentra SR Turbo / Nismo Catch Can

    B17 Sentra SR Turbo / Nismo Catch Can

    Regular Price: $199.00

    Special Price $159.00

    2JR Complete Catch Can Kit for the B17 Turbo (all models). Arrives with all the lines precut for ease of installation, billet mounting bracket, spring clamps, optional drain kit and engraving. 4 Color Choices available. Please know that each kit is built to your order specifications and can take approx 2 weeks to ship depending on production cycle. FOR INSTALL INSTRUCTIONS - REFER TO THE VIDEO ON THE 2JR FACEBOOK PAGE AND/OR YOUTUBE CHANNEL! Benefits: -Effectively raises the octane and increases engine performance from cleaner inlet air -Prevents oil buildup in the intake, intercooler, throttle body, etc. -Excessive oil collection can be an indicator of a damaged engine -Lowers hydrocarbon emissions Features: -6061 Billet Aluminum O-Ring Sealed Oil Can -Integrated Oil Separating Condensing -Billet 6061 1/2" thick mounting bracket with stainless hardware -All precut lines/fittings and spring clamps -Optional Drain Kit -4 Color Options -2JR Engraving Option -Safe for Pressurized Applications Learn More
  5. Clearance - Nissan Sentra Lightweight Pulley (B17) - Fits Sentra Turbo / Nismo

    Clearance - Nissan Sentra Lightweight Pulley (B17) - Fits Sentra Turbo / Nismo

    Regular Price: $134.99

    Special Price $79.99

    For all B17 Sentra models - 1.8L and 1.6L Turbo!. From 2013 and up. 2JR introduces a lightweight solid billet 6061 racing pulley that weighs over 80% less than the stock pulley at just 15 ounces! Which translates into less rotational mass and quicker revving. All pulleys are anodized, balanced and DOES NOT require a belt change. This is a simple bolt on for more power in less than 30mins. Includes 2JR engraved logo. Incredible results with a simple pulley install - we love it on ours! Fits all B17 Models - including the SR Turbo and Nismo! Learn More
  6. 2JR B17 Sentra SR/ Nismo/Juke Short & Full Cold Air Intake

    2JR B17 Sentra SR/ Nismo/Juke Short & Full Cold Air Intake

    Regular Price: $199.00

    Special Price $159.99

    Sentra SR/Nismo/Juke Cold Air Intake - 2JR Nismo Intake relocates the filter outside of the engine compartment to deliver cool air inlet temperatures. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horsepower and torque. But that's only part of the power equation. Tuning the inlet pipe in length and diameter to match the engine's resonance helps move more air to the cylinders (think of your engine as a big air pump), and this tuning allows us to deliver large power gains. We also monitor fuel trim correction factors and all OBDII sensors during product development to eliminate leaning the engine out and/or throwing a check engine light. Available in two versions - Short Ram Version and the Full Cold Air Version. May fit V2 Juke engines with only the Short Ram Version Available in Polished / Wrinkle Red / Gloss Black Colors will add 2 weeks Learn More
  7. Semi Race Version

    2JR B17 SR Turbo / Nismo 304 Stainless Catback - 3 Versions

    Regular Price: $699.00

    Special Price $469.99

    2JR Hi-Power Sentra SR / Nismo 70mm 304 Stainless Catback 2JR now has the best available exhaust for your Nismo Sentra SR and Nismo (1.6L Turbo) with a 70mm full stainless 304 system to outlast and outperform the factory exhaust. OEM is a mere 49mm - and highly restrictive under boost. Unlock your Nismo's potential with the 2JR Midpipe and Catback. Together they bump exhaust up to 70mm to allow the engine to breath better and spool harder. No check engine lights or codes and you retain one cat in the DP so you can pass emissions without having to add a defouler. The sound? Absolutely amazing. Deep, throaty with a distinctive burble that only 2JR can offer with its proprietary resonator and pipe design. Can be made in these configurations 1. Full Race - Straight Stainless Piping with Resonated Rear Tip - Louder / Deep / Can hear all the crackles 2. Semi-Race - Resonator in Front Section only - about 6 DB quieter than the Full Race 3. Street Spec - Straight Stainless Piping with Rear 2JR Muffler - Quietest Setup Limited quantities and made specifically to order. Sound Clip

    Learn More
  8. 2JR Sentra Turbo SR / Nismo 70mm Midpipe (20wtq / 15whp)

    2JR Sentra Turbo SR / Nismo 70mm Midpipe (20wtq / 15whp)

    Regular Price: $299.99

    Special Price $229.99

    2JR introduces their 70mm Full 304 Stainless Steel Midpipe for the Sentra SR Turbo and Nismo editions. Gains over 20wtq and 15whp without a tune!! Made from 4mm thick 304 Stainless Steel for long life, corrosion resistance and strength in the harshest environment. Direct bolt on with no modification required. And no check engine light when paired with our 02 Spacer. Removes the second cat in the midpipe - the primary cat remains in the downpipe. No smell, no noise - and over 20wtq!! Fits all B17 Turbo Sentras In stock and shipping now! Learn More
  9. Nissan Sentra Lightweight Pulley (B17) - Fits Sentra Turbo / Nismo

    Nissan Sentra Lightweight Pulley (B17) - Fits Sentra Turbo / Nismo

    Regular Price: $134.99

    Special Price $99.99

    For all B17 Sentra models - 1.8L and 1.6L Turbo!. From 2013 and up. 2JR introduces a lightweight solid billet 6061 racing pulley that weighs over 80% less than the stock pulley at just 15 ounces! Which translates into less rotational mass and quicker revving. All pulleys are anodized, balanced and DOES NOT require a belt change. This is a simple bolt on for more power in less than 30mins. Includes 2JR engraved logo. Incredible results with a simple pulley install - we love it on ours! Fits all B17 Models - including the SR Turbo and Nismo! Learn More
  10. V2 Juke / Nismo / SR Hard Intercooler Piping Kit

    V2 Juke / Nismo / SR Hard Intercooler Piping Kit

    Regular Price: $329.99

    Special Price $219.99

    As with all intercooler hard-pipe kits, the stock plastic pipes to and from the intercooler are replaced with solid pipes to eliminate distortion under boost. But the devil is in the details, and that is where similarities end. The 2JR V2 MR16DDT Hard-Pipe Kit consists of mandrel pipes made from aluminum tubing on both the cold side and hot side of the intercooler. The results are hard pipes pipes from the turbo outlet to intercooler inlet and from the intercooler outlet to the throttle body, without unsightly mid-pipe silicone hose couplings that can disrupt flow or potentially blow off under boost. The hot and cold pipe diameters are increased from the stock 2.5" and 2.25", enhancing flow even further. We used custom 2.6" couplers to fit over the OEM intercooler and Throttle Body so no special attachment was required. Also included are billet aluminum brackets to install the factory engine cover if you prefer. Piping is available in polished, wrinkle red or black. Includes both Hot and Cold side piping, couplers, clamps and brackets. Fits all V2 Engine Jukes (2015 and Up) - does not fit RS models with V1 engine. Fits all SR Turbo and Nismo Sentra models. Simple install in 1hour with hand tools. Learn More

Items 1 to 10 of 15 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction