Search results for 'lift kit'
-
Brian Crower High RPM Valve Springs - QR25DE (all models)
Regular Price: $139.98
Special Price $129.78
Brian Crower High RPM Valve Springs - QR25DE (all models) * Valvesprings Designed for high rpm, Brian Crower valve springs are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures (chamfer, debur, etc...) for consistent pressures over long term, high rpm usage. Quality valve springs are critical in the prevention of premature valve float. * Retainers The ultimate in lightweight high performance, Brian Crower titanium retainers typically weigh in approximately 40% less than the factory OEM steel units. CNC machined for premium 6AL4V titanium bar stock to exacting tolerances. * Spring/Retainer Kits Brian Crower valve spring and titanium retainers kits are system matched to work in unison to deliver better valve control at extended rpm's and allow for greater lift camshafts for added performance and reliability. Fits all QR25DE models 2002 - 2013 ALTIMA 2005 - 2012 FRONTIER 2008 - 2012 ROGUE 2002 - 2012 SENTRA 2005 - 2006 X-TRAIL Learn More -
Gen1 QR25DE OEM Headgasket Kit
Regular Price: $146.71
Special Price $118.41
Gen1 QR25DE OEM Headgasket Kit Includes OEM Nissan Headgasket and headbolts for the Gen1 QR25DE (2002-2006). 2JR also includes the copper grease for the threads of the bolts. NOTE: you will need a E20 torx bit to remove and install the OEM Bolts and a Angle Gauge - both can be added in the options below Headbolt TQ Sequence https://f01.justanswer.com/JACUSTOMERj34ssqqy/2013-03-05_013940_em_01.jpg Learn More -
Gen1 Signal Wheel for B16 Crank
Regular Price: $106.78
Special Price $96.14
Gen1 Signal Wheel for B16 Crank with Bolts Signal wheel to install a B16 Crankshaft or 2JR Knife-edged Crankshaft in a Gen1 QR25 (2002-2006). Complete OEM kit with Bolts Learn More -
OEM QR25DE Engine Timing Kit
Regular Price: $209.14
Special Price $198.71
Complete Engine timing kit for the Gen 1 QR25DE motor (2002-2006) - fits all Gen 1 QRs OEM Nissan Parts include 1. Left and Right Guide Rails 2. Chain Tensioner 3. Main Chain 4. Exhaust Sprocket 5. Lower Main Sprocket 6. Orings for Upper Pan, Front Cover and Timing Cover Does not include Intake Cam Sprocket/Phaser (can be purchased separately) or the lower chain for the balance shafts - we suggest adding the BSR Kit Learn More -
QR25 Nismo Motul Oil Change Kit (All years)
Regular Price: $139.78
Special Price $109.76
2JR Nismo Oil Change Kit Includes 5 QTS of Motul Nismo 5w40 / K&N Gold Large Oil Filter and OEM Seal for Drain Plug NISSAN MOTORSPORTS INTERNATIONAL - High performance lubricant specially developed for high output, high torque engines. NISMO COMPETITION OIL is the best protection you can get for your engine. This oil grew up with that engine and its development focused on high performance motor sports use: tested in the 2008 Tokachi 24 Hours, run in the NISSAN GT-R NISMO RC and NISSAN GT-R Club Track Edition, and raced in the 24 Hours Nurburgring. The final result of development testing was the choice of a 5W40 over a 0W40 viscosity grade. 2193E (5W40) is a select, synthetic multi-grade oil which mixes polyolesters, known for their superlative viscosity at low temperatures, into the base oil. Formulated for low friction but maintaining generous filming properties, this NISMO-MOTUL motor oil will minimize engine wear to the bearings where pressure is at its highest. Learn More -
QG18DE / SR20 - ARP Flywheel Bolt Kit
Regular Price: $59.99
Special Price $39.99
These Pro series flywheel bolt kits from ARP give you all that you need to bolt in your flywheel with confidence. They're much stronger than OEM hardware, are forged from aerospace alloy, and are heat-treated prior to thread rolling and machining. These bolts feature an exclusive, flat 12-point head design and a larger-than-stock shank diameter for increased strength and improved flywheel register. Fits all QG/SR flywheels, stock and aftermarket.
Learn More -
2002-2006 Hitachi QR25DE Oil Pump / Front Cover
Regular Price: $179.99
Special Price $152.78
Hitachi Oil Pump and Timing Cover Assembly for the 02-06 QR25DE (does not fit B16 models)
- Original Equipment Supplier
- Easy installation with a factory quality fit
- Modular design
- Long service life
- Flow-optimized system design
2JR offers an option for a complete set of OEM Orings needed for the install (these come with the 2JR Rebuild Kit)
- (2)pcs - 15066-3Z000
- (1)pcs - 15066-3Z001
- (1)pcs - 15066-3Z002
- (1)pcs - 15066-3Z003
- (1)pcs - 15066-3Z005
Learn More
-
02-06 B15 Sentra VQ Engine Mount Kit
Regular Price: $599.99
Special Price $349.99
Mount a FWD VQ35DE in your Sentra correctly with 2JR's billet mount kit. Includes front and rear solid delrin mounts, billet brackets for the front lower mount, axle carrier, axle spacer and passenger side mount. Take the guess work out of the install and do it right! Also available are full VQ install wiring harnesses, headers, UpRev and other swap parts. Learn More -
(02-06) QR25DE Complete Engine (Street or Race)
Regular Price: $4,200.00
Special Price $3,990.00
(02-06) QR25DE Complete Engine 2JR Fully Built QR Engines are now available. Built to your specs, for NA, High Comp or Boost - including sleeved blocks capable of +700whp. No one has built more QRs than 2J with a commitment to quality and excellence. Engines are drop shipped to your location, ready for install or have us remove and install your new engine. Head Work – Machined Head 5 Angle valve angle job New OEM valves seals Cam Buckets (clearance to spec) OEM Cam Sets Cometic Headgasket Block – Balanced and Blueprinted, Assembled with Head (Long Block – complete/assembled) OEM Piston Set 9.5-1 Compression (Thicker Ring Lands & Better Quench Pads) Block Honed 2JRacing H Beam or I Beam Forged Rod Sets ARP Rod Bolts ARP Head Bolts ACL Main and Rod Bearings New OEM Front Cover (oil pump) New Water Pump JWT BSR Kit Complete Timing Equipment (chain, guides, tensioner, and sprocket) ALL New OEM Seals, Gaskets, O-Rings and Plugs New OEM Cam and Crank Sensors NGK LFR6A-11 Plugs Learn More -
QR25DE- ARP Main Stud Kit
Regular Price: $159.99
Special Price $149.99
These ARP main studs are made from 8740 chromoly steel and have a 190,000 psi tensile-strength rating. They are precision centerless-ground and thread-rolled to Mil-S-8879 specs, with a black oxide finish for corrosion resistance. The kits come complete with hardened washers and high-strength hex nuts.
Learn More -
QR25DE - ARP Head Stud Kit (all years)
Regular Price: $179.99
Special Price $159.99
Application: QR25DE - All years / Models (b15, b16, altima, rogue)Pro series cylinder head studs from ARP are cold-forged to ensure molecular integrity. They are heat-treated prior to thread rolling and machining and are rated at a whopping 200,000 psi for the 8740 material and 220,000 psi for ARP2000. ARP Pro series kits are also available with 12-point nuts, and all kits come complete with hardened parallel washers for an even load distribution and accurate torque readings.
Learn More -
B15 QR25DE- ARP Flywheel Bolt Kit
Regular Price: $59.99
Special Price $39.99
These Pro series flywheel bolt kits from ARP give you all that you need to bolt in your flywheel with confidence. They're much stronger than OEM hardware, are forged from aerospace alloy, and are heat-treated prior to thread rolling and machining. These bolts feature an exclusive, flat 12-point head design and a larger-than-stock shank diameter for increased strength and improved flywheel register. These bolts will only fit Forged Steel Flywheels - will NOT fit aluminum flywheels (JWT, Fidanza). Will NOT fit OEM B15 Flywheels - use OEM bolts for these. Only fits Forged Steel Flywheels. Not OEM, JWT, Fidanza
Learn More -
Wiseco High Comp Forged Piston Kit 10.5:1
Regular Price: $761.38
Special Price $742.78
QR25DE - fits years 2002 to 2013. 4032 extruded material forged for maximum strength. Wiseco leads the performance aftermarket by producing the highest quality forged pistons for domestic automobiles, sport compact and racing applications right here in the USA. Wiseco is unique because we forge all of our own pistons in house, and produce all of our own forge tooling right here in the USA. This allows us to control all aspects of our manufacturing process from raw bar to skirt coating finished parts. Will fit on 2JR Forged I or H beam rods with tapered ends. Rods include ARP Rod bolts at no add't cost. Features include: - High strength aluminum forgings - Super lightweight designs - Fully CNC machined and balanced to +/- 1 gram - Wrist pins included at no extra cost - Accumulator groove included - Double pin oilers, force fed from oil ring - Pick lock grooves for easy lock removal Some sizes may take 2-4 weeks for production by Wiseco. Comes in the following sizes - standard .5 mm overbore (20 over) 1 mm overbore (40 over) INCLUDES: 4 pistons Oil Ring and Comp Ring Set Piston Wrist Pins Wrist Pin Clips Learn More -
Wiseco Standard Comp Forged Piston Kit (Turbo and Stock)
Regular Price: $761.38
Special Price $742.78
QR25DE - fits years 2002 to 2013. 4032 extruded material forged for maximum strength. Wiseco leads the performance aftermarket by producing the highest quality forged pistons for domestic automobiles, sport compact and racing applications right here in the USA. Wiseco is unique because we forge all of our own pistons in house, and produce all of our own forge tooling right here in the USA. This allows us to control all aspects of our manufacturing process from raw bar to skirt coating finished parts. Will fit on 2JR Forged I or H beam rods with tapered ends. Rods include ARP Rod bolts at no add't cost. 8.55-1 COMPRESSION Features include: - High strength aluminum forgings - Super lightweight designs - Fully CNC machined and balanced to +/- 1 gram - Wrist pins included at no extra cost - Accumulator groove included - Double pin oilers, force fed from oil ring - Pick lock grooves for easy lock removal Some sizes may take 2-4 weeks for production by Wiseco. Comes in the following sizes - standard .5 mm overbore (20 over) 1 mm overbore (40 over) INCLUDES: 4 pistons Oil Ring and Comp Ring Set Piston Wrist Pins Wrist Pin Clips Learn More -
AC Delete Kit (Non-OEM)
Regular Price: $106.98
Special Price $92.78
AC Delete Kit (Non-OEM) Fits all years, QR25 (02 and up) - removes the AC compressor and replaces it with free spinning pulley, bracket and hardware (included). NO NEW BELT CHANGE REQUIRED. Uses same size as stock belt. Free up some HP, less drag on the QR. Learn More -
OEM Nissan B15 QR25 Full Engine Rebuild Kit (02-06)
Regular Price: $629.99
Special Price $589.98
Full rebuild kit for your Gen 1 (02-06 Sentra, Altima) QR25 that includes everything you need to rebuild your QR yourself. DOES NOT FIT THE FRONTIER
Headgasket
Intake manifold gasket
Exhaust manifold gasket
Valve cover gasket
Valve stem seals
All necessary O-rings
Front seal and rear main sealMain and Rod Bearings
10 Head Bolts
Oil Pump / Water Pump
Cam and Crank Sprockets
Main Timing Chain
Main Tensioner
All Chain Guide Rails -
JWT QR25DE Balance Shaft Removal Kit (BSR)
Regular Price: $129.99
Special Price $109.99
Must have for any lightly modified and/or turbo QR. The Balancer Shaft Removal kit is a must for high RPM performance. The QR25DE comes equipped with a balancer shaft assembly that spins at twice engine speed to generate an opposing inertial mass. Increases oil capacity by 1.5qts Learn More