Search results for 'bolt'
-
2JR Fiesta ST Hi-Power Downpipe 304SS
Regular Price: $329.99
Special Price $179.98
Made from 304SS Stainless, bolts to the OEM exhaust or 3" Catback System. The sound level of the full race to the catted downpipe is nearly same, only 7-10db at WOT. With our 2JR 3" catback and full race downpipe, its very streetable. The difference in WTQ vs the OEM downpipe is over 30ft/lbs. With our defouler (optional) - we never had a check engine light in over 20K miles and passed GA emissions testing. Now with lower bracket for strength With our 2JR 3" Catback, Full Race DP, Cobb AP (93map V1), and K&N Drop in Filter - we clicked off continuous 247-251wtq runs with varying between 200-202 whp. With the 2JR catted DP and the same mods, we turned mid 230wtq. Sound Clips (2JR 3" Catback with Full Race DP) Intake Sound http://1drv.ms/1ldXC1z Driveby http://1drv.ms/1ldXNtH Pull Off http://1drv.ms/1ldXUFR Learn More -
Fiesta ST - Wilwood Rear Big Brake Kit
Regular Price: $992.49
Special Price $979.88
Upgrade to 11.75" rear rotors and wilwood calipers. Available in Black, Red and smooth or drilled rotors. YOU MUST CHOOSE THE TIMKEN REAR HUBS TO FIT THIS BRAKE KIT! No cutting, drilling is required and the hubs swap out in 15mins with 4 simple bolts. 2JR provides new hardware for the rear hubs. Combination hydro-mechanical Parking Brake calipers use hydraulic pressure from the master cylinder for stopping power, and an internal mechanical lock within the caliper for a parking brake. CPB kits are built primarily for front wheel drive vehicles, and select rear wheel drive axles that are not well suited for internal shoe style parking brakes. The calipers are coupled with oversized two-piece rotor assemblies with aluminum hats and high friction BP-10 compound pads. CPB kits provide the correct balanced brake performance and matching style to compliment front big brake upgrade kits.. Each kit is engineered vehicle specific to maintain full compatibility with the OE master cylinder output and factory ABS functions. Optional caliper finishes and rotor designs enable the builder to personalize the style and optimize brake performance for every individual application. Fits all 17" rims - no spacers required. Some 16" rims will clear, please call to confirm. 2JR allows you to choose your brake pad compound / Rotor Type and Color BP10 - Street PM - ProMatrix (low dust/higher performance) Wilwood Stainless Line Kit is REQUIRED for install (includes all fittings) Brake Pad Info/Specs: http://www.wilwood.com/BrakePads/BrakePadsApp.aspx Learn More -
Kompact EM BOV VR2 Dual Port Products Blow Off Valve - Fiesta ST / Mustang EcoBoost
Regular Price: $242.99
Special Price $210.99
The award-winning Kompact EM series Blow-Off Valves, are the world’s first truly plug and play Blow-Off Valves. Simply unplug and unbolt your OEM Blow-Off Valve, and install ours in its place. … Patent pending integrated pressure control True plug and play upgrade Integrated proprietary high-temperature solenoid valve Billet construction with high-temperature o-rings Available in plumb back or dual port options Fits both the Fiesta ST and Mustang EcoBoost Learn More -
Ford Racing Fiesta ST LSD Installation Kit
Regular Price: $229.78
Special Price $208.98
Ford Racing Fiesta ST LSD Installation Kit Kit includes the following components: Differential Bearings (2) Ring Gear Bolts (10) Axle Seals (2) Gasket Maker (2) Threadlock and Sealer (1 Red, 1 Blue) Learn More -
Fiesta ST - COBB Tuning Catback Exhaust
Regular Price: $850.00
Special Price $792.98
Fiesta ST - COBB Tuning Catback Exhaust COBB Tuning CatBack Exhaust: The COBB Tuning Catback Exhaust is heralded often for its quality, performance, and subtlety. Engineered to be a vehicle specific unit, the COBB Tuning Catback Exhaust uses the highest quality stainless piping and a muffler designed for direct and efficient flow of exhaust to achieve the highest performance while still retaining a stock like appearance and sound level. The COBB Tuning Catback Exhaust does not deviate from the factory emissions equipment and conforms to the SAE dictated 95-decibel exhaust noise level limit enforced by California, as well as other states in the US. This system is modeled after the stock exhaust fitment locations, therefore making it an easy direct bolt on item inclusive of all needed gaskets and hardware. Learn More -
Fiesta ST - Turbosmart Internal Wastegate Actuator
Regular Price: $153.99
Special Price $119.99
Turbosmart Wastegates - Internal Wastegate Actuator: Designed like any Turbosmart product, with the highest of quality and precision, the Internal Wastegate Actuators (IWG) provide better turbo response and greater sensitivity when managing boost pressures. Each IWG is adjustable with several spring options and packaged in a kit form so they can be fitted as a direct bolt-on replacement for the factory part. It canʼt get any easier! *Features:* * Silicone diaphragm with Nomex reinforcement to withstand high temperatures. * High grade, billet aluminum construction * Stainless steel rods and connecting clevis for corrosion resistance. * Locking Collar design cap allows for quick spring changes. * Range of springs from 3 to 26 psi base pressure Learn More -
2JR Fiesta ST Ultra-Quiet 3" Side Exit
Regular Price: $679.00
Special Price $569.78
2JR does it once again with their custom built side exit for the Fiesta ST. We've built this exhaust for the best performance, sound and weight savings possible over any exhaust on the market. Made from 4mm thick 304 Stainless Steel for long life, corrosion resistance and strength in the harshest track environment. Next we've added steel encased rubber hangers that bolt to the chassis at stock location points for a perfectly tight fit centered on the sill opening - this allows for no burning of the sill. Then we use an oval stainless tail section for ground clearance over the pinch weld. For the keeping this completely street legal for sound, 2JR uses a large free flowing stainless resonator to designed to keep the exhaust tone completely tame (even with a catless downpipe) while keeping backpressure at an absolute minimum. Lastly - and most importantly, is the weight savings. Lighter than any other widely used system on the market with approx. 35% less piping and weight. Will bolt to the stock downpipe or the 2JR downpipe (or any other aftermarket production downpipe). NOTE: you will need to trim the pinch weld in a 4" section using a die grinder or similar. Then you will need to trim the plastic surround inside the sill where the factory cutout is located. This can be done with a dremel. Both are quite easy to do. SOUND CLIP: https://www.facebook.com/2JRacing-206550699368164/ SEE BOTTOM OF PAGE FOR INSTALL INSTRUCTIONS Learn More -
Ford Fiesta ST Oil Cooler Kit
Regular Price: $635.00
Special Price $519.00
Turbocharged, high stress 4 cylinder engines like the 1.6L EcoBoost engine in the Fiesta ST can overheat their oil very quickly within a few laps on the track or aggressive street driving. Even with the stock liquid-to- liquid heat exchanger, the engine can still run very hot and run the risk of overheating the engine's coolant as well. Aggressive tunes and some track miles can significantly overheat your oil and wear down your engine. Leave it to Mishimoto to come up with an oil cooling solution for your Fiesta ST! Mishimoto engineers started with a large 19-row oil cooler and mounted it in the front of the vehicle where it receives the most airflow. The oil cooler was designed to bypass the stock liquid to liquid oil cooler in order to get the best possible oil temperature reduction. A new CNC center bolt and aluminum coolant bypass tube are provided to easily eliminate the stock oil cooler unit. Application specific braided stainless steel lines transfer oil from the cooler to the engine and feature -10AN fittings for an easy installation. Mishimoto engineers saw consistent temperature decreases of over 35 F (19.5 C) using our non-thermostatic sandwich plate. Proving that this oil cooler kit can withstand the stresses of the most extreme applications. This oil cooler kit is available with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty. Learn More -
Ford Fiesta ST Intercooler Pipe Kit - Polished or Wrinkle Black
Regular Price: $415.00
Special Price $329.99
Increase the airflow to your 1.6L EcoBoost with Mishimoto intercooler piping for the 2014+ Ford Fiesta ST. The stock Fiesta ST intercooler piping is riddled with restrictive bends and small diameter sections that impede airflow. These Mishimoto intercooler pipes have a 2.5" diameter and are mandrel-bent to eliminate any restrictions. When you're turning up the boost on your hot hatch, Mishimoto's Fiesta ST intercooler piping will have no problem supporting the power you throw at them. The Mishimoto Fiesta ST cold-side intercooler pipe features a CNC-machined sensor flange for the stock pressure sensor, a port for meth injection or a boost gauge, and a silicone hose and CNC plug to allow deletion of the stock sound symposer system. Mishimoto's Fiesta ST intercooler piping features durable silicone couplers and stainless steel T-bolt clamps for reliable holding power when you're hitting full boost on a long straight. Installation requires no modifications to the engine bay, as these Fiesta ST intercooler pipes are a direct fit and work with both the stock and the Mishimoto Fiesta ST intercooler. Mishimoto Fiesta ST intercooler piping is available in either a polished or wrinkle black finish, and, like all of our Fiesta ST performance parts, includes the Mishimoto Lifetime Warranty. Learn More -
Mishimoto Ford Fiesta ST 1.6L Performance Air Intake Kit - Wrinkle Black
$382.95Add horsepower and sound to your ride with the new Mishimoto Performance Air Intake. This kit is engineered specifically for your car and includes everything needed to replace the restrictive stock airbox. Installation is quick and simple, perfect for some extra punch on the street or autocross course. The Mishimoto Air Intake includes everything needed for installation, installs in under one hour, and works perfectly with the stock tune. The mandrel-bent aluminum intake pipe is available with a polished or powder-coated finish. This pipe utilizes a CNC-machined mass airflow sensor (MAF) housing to provide accurate and consistent MAF readings, which translates into a smooth power band. To reduce air intake temperatures, a powder-coated heat shield is placed between the air filter and hot exhaust manifold, significantly reducing heat-soak. The Mishimoto free-flowing air filter provides an 85% greater surface area, optimal airflow, and proper filtration of dirt and debris. The included Mishimoto oiled air filter is completely serviceable, allowing for a lifetime of reliable use. Additionally this intake kit includes a silicone coupler, clamps, and all other hardware necessary to complete a quick installation for easy bolt-on power. Along with an upgrade in power, this intake also provides an aggressive and rich intake tone that is a huge improvement over the stock intake. The Mishimoto Performance Air Intake is designed in Delaware, USA and includes the Mishimoto Lifetime Warranty. Learn More -
Mishimoto 2014-Current Ford Fiesta ST 1.6L Performance Air Intake Kit - Wrinkle Red
$382.95Add horsepower and sound to your ride with the new Mishimoto Performance Air Intake. This kit is engineered specifically for your car and includes everything needed to replace the restrictive stock airbox. Installation is quick and simple, perfect for some extra punch on the street or autocross course. The Mishimoto Air Intake includes everything needed for installation, installs in under one hour, and works perfectly with the stock tune. The mandrel-bent aluminum intake pipe is available with a polished or powder-coated finish. This pipe utilizes a CNC-machined mass airflow sensor (MAF) housing to provide accurate and consistent MAF readings, which translates into a smooth power band. To reduce air intake temperatures, a powder-coated heat shield is placed between the air filter and hot exhaust manifold, significantly reducing heat-soak. The Mishimoto free-flowing air filter provides an 85% greater surface area, optimal airflow, and proper filtration of dirt and debris. The included Mishimoto oiled air filter is completely serviceable, allowing for a lifetime of reliable use. Additionally this intake kit includes a silicone coupler, clamps, and all other hardware necessary to complete a quick installation for easy bolt-on power. Along with an upgrade in power, this intake also provides an aggressive and rich intake tone that is a huge improvement over the stock intake. The Mishimoto Performance Air Intake is designed in Delaware, USA and includes the Mishimoto Lifetime Warranty. Learn More -
Mishimoto 2014-Current Ford Fiesta ST 1.6L Performance Air Intake Kit - Polished
$382.95Add horsepower and sound to your ride with the new Mishimoto Performance Air Intake. This kit is engineered specifically for your car and includes everything needed to replace the restrictive stock airbox. Installation is quick and simple, perfect for some extra punch on the street or autocross course. The Mishimoto Air Intake includes everything needed for installation, installs in under one hour, and works perfectly with the stock tune. The mandrel-bent aluminum intake pipe is available with a polished or powder-coated finish. This pipe utilizes a CNC-machined mass airflow sensor (MAF) housing to provide accurate and consistent MAF readings, which translates into a smooth power band. To reduce air intake temperatures, a powder-coated heat shield is placed between the air filter and hot exhaust manifold, significantly reducing heat-soak. The Mishimoto free-flowing air filter provides an 85% greater surface area, optimal airflow, and proper filtration of dirt and debris. The included Mishimoto oiled air filter is completely serviceable, allowing for a lifetime of reliable use. Additionally this intake kit includes a silicone coupler, clamps, and all other hardware necessary to complete a quick installation for easy bolt-on power. Along with an upgrade in power, this intake also provides an aggressive and rich intake tone that is a huge improvement over the stock intake. The Mishimoto Performance Air Intake is designed in Delaware, USA and includes the Mishimoto Lifetime Warranty. Learn More -
Mishimoto 2014-Current Ford Fiesta ST Induction Hose (Black)
$154.95The Mishimoto 2014+ Ford Fiesta ST Silicone Induction Hose is precision engineered as a bolt-on upgrade in both performance and style. The 100% silicone hose is crafted with four-layers of silicone and heat-resistant embedded fibers for added strength. This 2014+ Fiesta ST kit replaces the small rubber induction hose with the superior silicone induction hose, which can tolerate much higher temperatures and internal vacuum. The CNC port is also permanently attached to the hose with a non-removable clamp, and comes with two silicone-safe worm-gear clamps, making installation easy! Mishimoto's 2014+ Fiesta ST silicone induction hose are more resilient to this exposure and will outlast the stock components substantially. To promote improved airflow, this hose have been designed with a smooth internal surface, unlike the accordion-style bends in stock hoses. Whether you are entering your 2014+ Fiesta ST in the local autocross, or lapping at your next track day, trust Mishimoto and our line of parts to keep your Fiesta ST cool. The Mishimoto 2014+ Fiesta ST Silicone Induction Hose Kit is available in black, blue, or red to match your styling preference. This kit, like our entire line of 2014+ Fiesta ST performance parts, includes the signature Mishimoto Lifetime Warranty. Learn More -
Mishimoto 2014-Current Ford Fiesta ST Induction Hose (Blue)
$154.95The Mishimoto 2014+ Ford Fiesta ST Silicone Induction Hose is precision engineered as a bolt-on upgrade in both performance and style. The 100% silicone hose is crafted with four-layers of silicone and heat-resistant embedded fibers for added strength. This 2014+ Fiesta ST kit replaces the small rubber induction hose with the superior silicone induction hose, which can tolerate much higher temperatures and internal vacuum. The CNC port is also permanently attached to the hose with a non-removable clamp, and comes with two silicone-safe worm-gear clamps, making installation easy! Mishimoto's 2014+ Fiesta ST silicone induction hose are more resilient to this exposure and will outlast the stock components substantially. To promote improved airflow, this hose have been designed with a smooth internal surface, unlike the accordion-style bends in stock hoses. Whether you are entering your 2014+ Fiesta ST in the local autocross, or lapping at your next track day, trust Mishimoto and our line of parts to keep your Fiesta ST cool. The Mishimoto 2014+ Fiesta ST Silicone Induction Hose Kit is available in black, blue, or red to match your styling preference. This kit, like our entire line of 2014+ Fiesta ST performance parts, includes the signature Mishimoto Lifetime Warranty. Learn More -
Mishimoto 2014-Current Ford Fiesta ST Induction Hose (Red)
$154.95The Mishimoto 2014+ Ford Fiesta ST Silicone Induction Hose is precision engineered as a bolt-on upgrade in both performance and style. The 100% silicone hose is crafted with four-layers of silicone and heat-resistant embedded fibers for added strength. This 2014+ Fiesta ST kit replaces the small rubber induction hose with the superior silicone induction hose, which can tolerate much higher temperatures and internal vacuum. The CNC port is also permanently attached to the hose with a non-removable clamp, and comes with two silicone-safe worm-gear clamps, making installation easy! Mishimoto's 2014+ Fiesta ST silicone induction hose are more resilient to this exposure and will outlast the stock components substantially. To promote improved airflow, this hose have been designed with a smooth internal surface, unlike the accordion-style bends in stock hoses. Whether you are entering your 2014+ Fiesta ST in the local autocross, or lapping at your next track day, trust Mishimoto and our line of parts to keep your Fiesta ST cool. The Mishimoto 2014+ Fiesta ST Silicone Induction Hose Kit is available in black, blue, or red to match your styling preference. This kit, like our entire line of 2014+ Fiesta ST performance parts, includes the signature Mishimoto Lifetime Warranty. Learn More -
Mishimoto 2014-Current Ford Fiesta ST Hot-Side Intercooler Pipe Kit - Wrinkle Black
$179.95Increase the airflow to your 1.6L EcoBoost with the Mishimoto hot-side Fiesta ST intercooler pipe kit for the 2014+ Ford Fiesta ST. The stock hot-side Fiesta ST intercooler pipe is riddled with restrictive bends and small diameter sections that impede airflow. These Mishimoto intercooler pipes have a 2.5" diameter and are mandrel-bent to eliminate any restrictions. When you're turning up the boost on your Fiesta, these pipes will have no problem supporting the power you throw at them. These hot-side Fiesta ST intercooler pipes feature durable silicone couplers and stainless steel T-bolt clamps to insure leak free connections. Installation can completed in under 30 minutes with no modifications to the engine bay, as Mishimoto's Fiesta ST intercooler piping is a direct fit and works with both the stock and Mishimoto performance Fiesta ST intercooler. The Mishimoto Fiesta ST hot-side intercooler pipe kit is available in either a polished or wrinkle black finish and, like all of our Fiesta ST parts, includes the Mishimoto Lifetime Warranty. Learn More -
Mishimoto 2014-Current Ford Fiesta ST Cold-Side Intercooler Pipe Kit - Wrinkle Black
$246.95Increase the airflow to your 1.6L EcoBoost with the Mishimoto Fiesta ST cold-side intercooler pipe kit for the 2014+ Ford Fiesta ST. The stock cold-side Fiesta ST intercooler pipe is riddled with restrictive bends and small diameter sections that impede airflow. These Mishimoto intercooler pipes have a 2.5" diameter and are mandrel-bent to eliminate any restrictions. When you're turning up the boost on your Fiesta, these pipes will have no problem supporting the power you throw at them. Plastic is always a material Mishimoto strives to eliminate, and the stock cold-side Fiesta ST intercooler pipe is unacceptable. The stock pipe is constructed completely of weak plastic that is bound to leak over time. The Mishimoto cold-side intercooler pipe is comprised entirely of lightweight aluminum and features a CNC-machined sensor flange for the stock pressure sensor, a port for meth injection or a boost gauge, and a silicone hose and CNC plug to allow deletion of the stock sound symposer system. Mishimoto's cold-side Fiesta ST intercooler piping features durable silicone couplers and stainless steel T-bolt clamps to ensure leak free connections. Installation can completed in under 30 minutes with no modifications to the engine bay, as these cold-side Fiesta ST intercooler pipes are a direct fit and work with both the stock and Mishimoto performance Fiesta ST intercoolers. Mishimoto's Fiesta ST cold-side intercooler piping is available in either a polished or wrinkle black finish, and, like all of our Fiesta ST performance parts, includes the Mishimoto Lifetime Warranty. Learn More -
Mishimoto 2014-Current Ford Fiesta ST Hot-Side Intercooler Pipe Kit - Polished
$179.95Increase the airflow to your 1.6L EcoBoost with the Mishimoto hot-side Fiesta ST intercooler pipe kit for the 2014+ Ford Fiesta ST. The stock hot-side Fiesta ST intercooler pipe is riddled with restrictive bends and small diameter sections that impede airflow. These Mishimoto intercooler pipes have a 2.5" diameter and are mandrel-bent to eliminate any restrictions. When you're turning up the boost on your Fiesta, these pipes will have no problem supporting the power you throw at them. These hot-side Fiesta ST intercooler pipes feature durable silicone couplers and stainless steel T-bolt clamps to insure leak free connections. Installation can completed in under 30 minutes with no modifications to the engine bay, as Mishimoto's Fiesta ST intercooler piping is a direct fit and works with both the stock and Mishimoto performance Fiesta ST intercooler. The Mishimoto Fiesta ST hot-side intercooler pipe kit is available in either a polished or wrinkle black finish and, like all of our Fiesta ST parts, includes the Mishimoto Lifetime Warranty. Learn More -
Mishimoto 2014-Current Ford Fiesta ST 1.6L Front Mount Intercooler (Black) Kit w/ Pipes (Black)
$979.95Many prototypes entered, but only one came out on top. The engineers went through multiple different designs for this Fiesta ST intercooler, weighing the benefits and downfalls of each. The final design consists of a tube-and-fin style intercooler in order to allow airflow to the radiator and reduce overall weight. The core size is 51% larger than stock, and also provides a 25% increase in internal core volume. During testing, this Fiesta ST intercooler dropped intake temperatures by a huge 26 F! This Fiesta ST intercooler kit includes air diversion plates to channel air through the cooler for maximum efficiency. The Mishimoto Fiesta ST cold-side intercooler pipe features a CNC-machined sensor flange for the stock pressure sensor, a port for meth injection or a boost gauge, and a silicone hose and CNC plug to allow deletion of the stock sound symposer system. Mishimoto's Fiesta ST intercooler piping features durable silicone couplers and stainless steel T-bolt clamps for reliable holding power when you're hitting full boost on a long straight. The all-aluminum, TIG-welded construction is of the highest quality, and like all Mishimoto Fiesta ST parts, it is backed by the Mishimoto Lifetime Warranty! Learn More -
Mishimoto 2014-Current Ford Fiesta ST Cold-Side Intercooler Pipe Kit - Polished
$246.95Increase the airflow to your 1.6L EcoBoost with the Mishimoto Fiesta ST cold-side intercooler pipe kit for the 2014+ Ford Fiesta ST. The stock cold-side Fiesta ST intercooler pipe is riddled with restrictive bends and small diameter sections that impede airflow. These Mishimoto intercooler pipes have a 2.5" diameter and are mandrel-bent to eliminate any restrictions. When you're turning up the boost on your Fiesta, these pipes will have no problem supporting the power you throw at them. Plastic is always a material Mishimoto strives to eliminate, and the stock cold-side Fiesta ST intercooler pipe is unacceptable. The stock pipe is constructed completely of weak plastic that is bound to leak over time. The Mishimoto cold-side intercooler pipe is comprised entirely of lightweight aluminum and features a CNC-machined sensor flange for the stock pressure sensor, a port for meth injection or a boost gauge, and a silicone hose and CNC plug to allow deletion of the stock sound symposer system. Mishimoto's cold-side Fiesta ST intercooler piping features durable silicone couplers and stainless steel T-bolt clamps to ensure leak free connections. Installation can completed in under 30 minutes with no modifications to the engine bay, as these cold-side Fiesta ST intercooler pipes are a direct fit and work with both the stock and Mishimoto performance Fiesta ST intercoolers. Mishimoto's Fiesta ST cold-side intercooler piping is available in either a polished or wrinkle black finish, and, like all of our Fiesta ST performance parts, includes the Mishimoto Lifetime Warranty. Learn More