Search results for '2007 sentra'
-
Injen 2007-2012 Sentra SER V-Spec 2.5L Gloss Black Cold Air Intake
Regular Price: $400.89
Special Price $369.78
Injen 2007-2012 Sentra SER V-Spec 2.5L Gloss Black Cold Air Intake B16 2.5L QR25 ONLY - Manual and Auto The Injen SP Series Intake Systems Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. The Injen SP Series Intake System does not limit itself to just a Cold Air System or Short Ram System. The MR Technology process has its effects on both types. The Injen SP Series Intake is The World's First Tuned Intake System ... Learn More -
Fidanza 2007+ Nissan Sentra Spec-V Short Throw Shifter (B16)
Regular Price: $129.96
Special Price $124.16
Fidanza 2007+ Nissan Sentra Spec-V Short Throw Shifter (B16) Fidanza Performance offers a large line of short throw shifters for both Import and Domestic applications. Fidanzas short shift kits are made precisely with 6061 aluminum and hardened steel. Many Fidanza shifters include all necessary hardware for installation, depending on application. Fits all B16 SpecVs from 2007-2012 Learn More -
B16 Sentra Goodridge Brake Lines (07-12)
Regular Price: $198.77
Special Price $139.98
G-STOP SS Braided Brake Line Kit B16 Sentra Goodridge Brake Lines (07-12) 2007-2012 Fits all B16 Sentras with front and rear disk brakes, including SpecV models. Goodridge G-Stop Brake Line Kits are constructed from the finest quality hose, consisting of a PTFE inner and stainless steel overbraid. Replacing OE brake lines with -03 PTFE hose improves brake feel over factory lines, eliminates sponginess, and provides shorter stopping distances and consistent braking in performance applications. The shorter stopping distances and improved pedal response provide safety features as well as performance advantages. All G-Stop lines go through a nine-point quality assurance testing including the materials tensile strength and 3000 psi pressure ratings. When used with an ABS braking system they virtually eliminate brake pedal “chatter”. All G-Stops conform to FMVSS106-Federal Motor Vehicle Safety Standard- making them DOT compliant and are TUV approved-the German standard that most international regulations follow. *Features* * Performance Enhancement & Safety Improvement * Eliminates Sponginess Under Braking * Increases Braking Efficiency * Abrasion and Corossion Resistent Learn More -
B16 Sentra/Altima Stage I Clutch and Forged Flywheel - OEM Stock Upgrade 2007+
Regular Price: $679.00
Special Price $598.78
Stage I Performance Carbon Ceramic Clutch and Forged Flywheel Kit Fits all 2007-2012 Nissan Sentra/Altima, incl Spec-V - QR25DE 2.5L models Includes Stage 1 Clutch, Flywheel and CSC (concentric slave unit) DOES NOT INCLUDE ALIGNMENT TOOL 34% Increase in clamping force Carbon and ceramic material with a performance pressure plate provides the best streetable clutch on the market today for your Nissan. This assembly is suited for bolt on upgrades up to 325whp. It provides extended life, easy engagement and great drivability. Not stiff or harsh, feels like stock. 2JRacing has partnered with the best American Made clutch manufacturer that specializes in sport compact clutches from street driven to full race applications. These clutches are proudly used in some of the fastest sport compact race cars in the county, including a number of the most recognized industry icon vehicles. These clutches represent the finest materials, workmanship and the best customer service in the industry. Offering the higher clamping force, stronger disk designs and uncompromised satisfaction, all at the most competitive pricing. Learn More -
B16 Sentra 2.5L Spec Forged Aluminum Flywheel (2007-2012)
Regular Price: $529.99
Special Price $476.99
B16 Sentra 2.5L Spec Forged Aluminum Flywheel (2007-2012) Fits all +2007 2.5L QR models (GenII QR25DE) MUST USE SPEC CLUTCH WITH THIS FLYWHEEL SPEC Flywheels are CNC manufactured at an unheard-of .001 tolerance, in an industry where the standard is .010. This precision manufacturing process ensures perfect balance and a perfectly flat bedding surface for the clutch disc, both of which also contribute to the ultimate in safety for competitive environments. All SPEC flywheels carry SFI certification. The automotive component most responsible for insuring optimum clutch performance and life is the flywheel. Learn More -
B16 Sentra 2.5L Stage III+ Clutch Kit Spec (2007-2012)
Regular Price: $749.99
Special Price $674.99
B16 Sentra 2.5L Stage III+ Clutch Kit Spec (2007-2012) Fits all +2007 2.5L QR models (GenII QR25DE) The SPEC Stage 3 Clutch Kit PLUS is the flagship stage for a high powered street or race car that requires a manageable and friendly engagement, the stage 3+ features a carbon semi-metallic full faced material that offers unparalleled life, friction co-efficient and drivability characteristics in one single package. The hub is double sprung with spring cover relieves for flexibility and heat treated components for strength and durability. Great for street, drag, drift, autocross, road racing, pulling, rallye and drift. *Features* * High clamp pressure plate * Carbon semi-metallic friction material * High torque sprung hub and disc assembly * Bearing and tool kit (select models, please inquire) *Types of Driving* Street, Drag, Pulling, Autocross Learn More -
B16 Sentra 2.5L Stage II Clutch Kit Spec (2007-2012)
Regular Price: $599.99
Special Price $539.99
B16 Sentra 2.5L Stage II Clutch Kit Spec (2007-2012) Fits all +2007 2.5L QR models (GenII QR25DE) The SPEC Stage 2 PLUS Clutch Kit features a multi-friction disc in a full faced configuration with carbon semi-metallic on one side and Kevlar on the other. Bridging the gap between stage 2 and stage 3, the 2+ offers drivability and engagement quality characteristic of the stage 2, but with a 15-20% higher torque capacity. The hub is double sprung with spring cover relieves for flexibility and heat treated components for strength and durability. Great for street, drag, autocross, road racing, pulling, rallye and drift. *Features* * High clamp pressure plate * Hybrid Kevlar and Carbon-Graphite Friction material * High torque sprung hub and disc assembly * Bearing and tool kit (select models, please inquire) *Types of Driving* Street, Drag, Pulling, Autocross Learn More -
B16 Sentra 2.5L Stage I Clutch Kit Spec (2007-2012)
Regular Price: $559.00
Special Price $503.99
B16 Sentra 2.5L Stage I Clutch Kit Spec (2007-2012) Regular Sale Price - $489 after Black Friday Fits all +2007 2.5L QR models (GenII QR25DE) The SPEC Stage 1 Clutch Kit features an integrally molded carbon kevlar-based, high performance organic lining that offers smooth engagement and excellent life. This lining has an integrally bonded steel backing for strength under high clamp loads and temperatures. The hub is double sprung with spring cover relieves for flexibility and heat treated components for strength and durability. Best for street and many track/off-road applications. *Features* * High clamp pressure plate * Steel-backed and multi-compound woven organic material * High torque sprung hub and disc assembly * Bearing and tool kit (select models, please inquire) *Types of Driving* Street, Drag, Drift, Road Race, Rallye, Pulling, Autocross Learn More -
Injen 2007-2012 Sentra SER V-Spec 2.5L 4 Cyl. (Manual Only) Polished Cold Air Intake
Regular Price: $400.89
Special Price $369.78
Injen 2007-2012 Sentra SER V-Spec 2.5L 4 Cyl. (Manual Only) Polished Cold Air Intake B16 2.5L QR25 ONLY - Manual and Auto The Injen SP Series Intake Systems Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. The Injen SP Series Intake System does not limit itself to just a Cold Air System or Short Ram System. The MR Technology process has its effects on both types. The Injen SP Series Intake is The World's First Tuned Intake System ... Learn More -
2JR Rigid Disk Stage III Clutch Kit (400whp) - QR25DE and VQ35DE
Regular Price: $489.99
Special Price $399.99
Rigid Stage III Clutch Sets are here! These are stronger, lighter and can handle the higher TQ loads. Same pad material as the Stage 3 clutch sets but without the sprung cages. Ceramic material with a performance pressure plate will provide the ultimate in street and strip combinations. No other clutch is built this well at this price and comes with a very easy clutch pedal. Not stiff or harsh, pedal feels like STOCK! 210% Increase in clamping force Spec - 425whp / 425ft/tq Applications 2002-2006 - Sentra 2.5L 2002-2006 - Atlimta 2.5L 2002-2006 - Maxima VQ35 (flywheel does not fit - only the clutch set) 2002-2006 - Rogue 2.5L Does not fit 2007+ Models (Gen2 QR) ALL CLUTCH KITS COMES WITH THROW OUT BEARING AND ALIGNMENT TOOL Options Include: 1. ARP Flywheel Bolts (only fits 2JR Forged Flywheel) 2. OEM Throwout Bearing Upgrade 3. 2JR Stainless Clutch Line 4. Motul Transmission Fluid Set (3 Bottles) This is the best fluid we've tested in the QR. Not stiff when cold, shifts smooth in all temp ranges. Protect your trans with the best 5. Forged Steel 14lb Flywheel Learn More -
B16 (2.5L) Denso Iridium TT IXEH20TT Spark Set (2007-2012)
Regular Price: $54.32
Special Price $42.99
DENSO Iridium TT Spark Plug:- Sold as a set of 4 For the 2007-2012 Sentra/Altima/Rogue with the QR25 The Denso Twin-Tip Technology Was Developed From Original Equipment Specification Super Ignition Plug (SIP) Design, Fusing a Fine Wire Iridium Center Electrode With a Needle Tip Platinum Ground Electrode. The Denso Iridium TT Combines The Power And Torque Of A High Performance Plug With The Endurance Of A Long Life Original Equipment Spark Plug. So You Can Drive Around The Earth Over 4 Times, With Lower Emissions And Better Fuel Economy. ThatS Over 100 Thousand Miles Of Uncompromised Performance. 0.4 mm Iridium Center Electrode: World's Smallest Diameter That Maximizes Firing Potential 0.7 mm Needle Tip Ground Electrode: Promotes Higher Spark Energy And Less Heat Quenching DENSO Patented Optimized Iridium-Rhodium Alloy Formula: Highest Concentration Of Iridium Vs. Competitors For Greater Durability DENSO Patented 360 Degree Laser Welding Process: Ensuring Exceptional Quality Bond And Structural Strength With The Iridium Center Electrode DENSO Part # IXEH20TT Learn More -
2007+ Sentra / Altima Medusa Header / optional Midpipe (QR25 2.5L)
Regular Price: $579.99
Special Price $429.78
2007+ Sentra / Altima Medusa Header / optional Midpipe (QR25 2.5L) Application - Header Only 2007 - 2012 2.5L Nissan Sentra 2007 - 2019 2.5L NIssan Altima (coupe and sedan) Application - Midpipe 2007 - 2012 2.5L Nissan Sentra (only) Midpipe will not fit Altima Coupe or Sedan The wait is finally over! The Medusa MB16 header is here!. Through continuous testing 2JR has improved the already dominate Medusa header with performance upgrades. Port changes to Oval Head Port Matched Flanges for a perfect seal - Longer runners by 4" over the V1 Medusa produce a higher mid-high rpm HP performance. And stepped runner design from 1.7" to 1.9" from the Spyder header help improve scavenging and broaden the torque curve. The MB16 Medusa is UEL (unequal length) and provides a "boxer-like" rumble at idle and under throttle. Slim fans and ACB ARE NOT required for fitment. Simply install and enjoy the performance and rumble from your Lt Ed MB16 Medusa. Made from 304SS Stainless. Bolts directly to your factory midpipe or step up to the 2JR 70mm Stainless Midpipe for even more power and roar! Learn More -
TEIN Springs - S.Tech Spring Kit - B16 Sentra (07-12)
Regular Price: $280.00
Special Price $249.99
TEIN Springs - STech: TEIN S.TECH Spring is an excellent step towards suspension tuning. For B16 (2007-2012) Sentra. FITS ALL MODELS They offer approximately a 1.5 inch drop for a more aggressive appearance. Comes with a 1 year limited warranty. Spring length is guaranteed not to sag more than 5mm and to be clear of any manufacture defects. *Features* * One year limited warranty * High-grade material adapted to improve guaranteed satisfaction * Rubber spring protector sheet to prevent noise (most applications) Ride Height (F): -1.3in (-34mm) Spring Rate (R): 269lbs/in (4.8kgf/mm) Ride Height (R): -1.1in (-29mm) Spring Rate (F): 168lbs/in (3kgf/mm) Learn More -
Nissan B16 Sentra Lightweight Pulley 2.0L (MR20DE)
Regular Price: $134.99
Special Price $99.98
2JR introduces a lightweight solid billet 6061 racing pulley that weighs over 80% less than the stock pulley at just 15 ounces! Which translates into less rotational mass and quicker revving. All pulleys are anodized, balanced and DOT NO require a belt change. This is a simple bolt on for more power in less than 30mins. Includes 2JR engraved logo. Fits all 2.0L MR20DE Nissan Sentras, 2007-2013 Learn More -
B16 Sentra 2.5L Catback Exhaust (2007-2012)
Regular Price: $779.00
Special Price $689.98
Step up your power goals with a hand-made, tig welded, catback exhaust from 2JR for for your 07-12 Nissan Sentra. Specifically designed for the Second Gen QR25 B16 Chassis (Sentra), this is the best exhaust system available. Made from stainless steel and available in either a 2.5 (quietest) or 3.0 piping size. We use Magnaflow resonators and mufflers with a resonated carbon fiber tip. Bolts to the OEM midpipe for 2.5 systems. You must use the 2JR 3" midpipe for the 3" catback version. Sounds amazing with the 2JR MB16 Medusa Header, Midpipe and 2.5" catback. Huge power increases, deep - clean sound without rasp. Learn More -
JWT QR25DE Balance Shaft Removal Kit (BSR)
Regular Price: $129.99
Special Price $109.99
Must have for any lightly modified and/or turbo QR. The Balancer Shaft Removal kit is a must for high RPM performance. The QR25DE comes equipped with a balancer shaft assembly that spins at twice engine speed to generate an opposing inertial mass. Increases oil capacity by 1.5qts Learn More -
Injen Cold Air Intake 2007-2012 Nissan Altima L4-2.5L
Regular Price: $377.98
Special Price $349.28
Injen Cold Air Intake 2007-2012 Nissan Altima L4-2.5L Fits all 07-09 Altimas with the QR25 2.5L - Aggressive engine tone under full throttle Available in Black or Polished Direct fit for 2007-2012 Nissan Altima L4-2.5L / Dyno Proven gains of up to 10 hp and 11 lb-ft. of torque Features Injen’s patented MegaRam (MR) Technology / Features Injen’s patented Air Fusion Technology / Provides power gains while maintaining A/F ratios No additional tuning required / Includes Universal Heat shield / Fully serviceable Injen SuperNano-Web dry air filter / Replacement air filter part number X-1014-BB Optional hydroshield part number 1033BLK or 1033RED CARB EO #: D-476-8 Learn More -
Nissan Sentra 2.5L ECU
Regular Price: $399.98
Special Price $349.98
Nissan Sentra 2.5L ECU Used/Tested ECUs for Nissan Sentra 2.5L 2002-2006 QR25DE SpecV 2.5L These can come STOCK or UpRev Flashed with a tune (NON TURBO ONLY). If your car has NATS (P8, GU, R5) the ECU WILL NOT WORK UNLESS the dealer codes the key to the new ECU or you select UPREV Flashed in the options and we turn off the security in the ECU. ECUs are tested before shipment. No returns. Learn More -
UpRev MAF GT
Regular Price: $399.98
Special Price $379.98
UpRev MAF GT The UpRev MAF GT is an upgraded sensor for Nissan Vehicles. The sensor retains the same connector and pin-out as vehicles using the following part numbers Fits 2004-2012 QR25DE Sentra / Altima and Frontier 2003-2017 350/370Z 2011-2017 Nissan Juke Nissan – 22680-7S000 Hitachi – W0133-1723137 Hitachi – MAF0031 This sensor is not a factory replacement, ECU calibration is required in order to use the UpRev GT MAF. The GT MAF voltage scale has been changed to suite higher airflow and so the ECU should be calibrated to suit the different voltage curve. This MAF is capable of reading up to 600hp on a factory 350Z VQ35DE MAF housing, can read higher numbers with a bigger MAF housing. 3" or Larger MAF housing is preferred. Learn More -
Hitachi OEM Throttle Body (QR25DE)
Regular Price: $198.99
Special Price $168.78
Hitachi OEM Throttle Body (QR25DE) Fits years 02-06 - All QR25DE Engines (First Gen) 02-06 Sentra 2.5L 02-06 Altima 2.5L 02-06 Xtrail 2.5L 02-06 Frontier 2.5L SUPERIOR: Hitachi Astemo is a Tier 1 OE supplier for Electric Throttle Bodies. Performs like OE to ensure quality you can depend on, right out of the box. PERFORMANCE: New throttle position sensor technology over OE design ensures smooth idle conditions and precise air flow metering. Restores original drivability characteristics. QUALITY: Application specific gear ratios and materials provide precise control with reduced wear and tear on the electric motor. Every individual part number is extensively tested for durability and consistent accuracy as part of the design process. ASSURANCE: 100% New, never remanufactured. No product wears the Hitachi logo until it has been carefully designed, precisely manufactured, and rigorously tested. SUPPORT: Hitachi Astemo's commitment to innovation and quality are unsurpassed. Likewise, is our commitment to product support. Please check the cross reference compatibility for your vehicle using the Amazon part selection tool located above the product images. Learn More