Search results for '%252525231 - Street%2525252FStrip Spec Includes- Tubular arms%2525252C Poly bushings and Rear moun'
Maximum words count is 10. In your search query was cut next part: Rear moun.
-
Nissan 55mm Full Race Wheel Studs - fits all models
Regular Price: $5.25
Special Price $3.68
We were asked to make these for the GTRs (we make their hubcentric wheel spacers) and we are offering these for the Sentras as well. This is a true racing wheel stud with rounded ends for wheel changes without damaging the threads. It also allows you to set your lug nuts on the studs for quick install with an impact gun. All the specs were designed with the GTR in mind, thread length, strength, material and longevity. These aren't black, zinc coated studs that quickly rust. These studs will never rust and can handle 25mm of increased track width per side. 55mm, Forged Chromoly SCM435. Also available in 82mm SOLD AS EACH $59 for pack of 16. Learn More -
Phenolic Thermal Intake Manifold Spacer Kit (VQ35DE)
$225.00Gains of 10hp and 12ft-lb of torque!
Average intake manifold temperature decrease of 40 degrees!Prevent heat from transferring from your heads to intake manifold and throttle body. Improve Airflow by eliminating the need for intake gaskets. Each spacer is CNC Machined to the highest tolerances to ensure the best airflow possible
Learn More -
VIAS Block Plate Kit (VQ35DE)
Regular Price: $49.99
Special Price $40.00
- 1/4" High Quality CNC Machined Variable Intake Actuator Block Plate with engraved logo (Made from 6061 Billet Aluminum) - 3 Properly Sized Zinc Plated Flange Bolts - VIAS Control Solenoid Valve Vacuum Cap - Printed Detailed Installation Instructions with Photos - Two Die Cut Silver Vinyl NWP Engineering Decals Learn More -
QR25 JWT Beehive Spring
$244.48QR25DE JWT BEEHIVE SPRING FOR USE WITH JWT COMPETITION CAMSHAFTS TO .600" LIFT. MUST USE RETAINER ARETN-BHIVE ON EARLY ENGINES. 35.96mm INSTALLED HEIGHT, USE ORIGINAL SPRING BASE SHIMS. Complete set FITS: ALTIMA 2002+, SENTRA 2.5L ENGINES: QR25DE Learn More -
QR25 JWT CAMSHAFT SET C1 BILLET CAMS
Regular Price: $699.98
Special Price $649.98
Ultimate in cams for your QR motor. Go big with the C1s.CAMSHAFT SET QR25DE C1 BILLET CAMS, BETTER THAN THE JWT S1 CAMS ABOVE 3500 RPM WHEN USED WITH 2J RACING LONG TUBE HEADER, 3" COLLECTOR AND LOW RESTRICTION EXHAUST SYSTEM. THERE IS ANOTHER 10-15 HP POTENTIAL BEYOND THE JWT S1 CAMS FOR A COMPETITION ENGINE. C1 IS A LARGE PROFILE
FITS: ALTIMA 2002+, SENTRA 2.5L B15 and B16,
ENGINES: QR25DE,
Suggested to use Brian Crower Valve Springs Install Instructions http://www.jimwolftechnology.com/wolfpdf/CAM_ASER2-QRNC1_HEAD_CLEARANCING_INST.pdf http://www.jimwolftechnology.com/wolfpdf/CAMSHAFT_INSTALL_QR25DE_INSTRUCTIONS.pdf Learn More -
QR25 JWT CAMSHAFT SET S1 BILLET CAMS
Regular Price: $699.99
Special Price $649.98
CAMSHAFT SET QR25DE BILLET CAMS. GOOD IDLE AND DRIVABILITY WITH AN 8+HP GAIN. USES STOCKS SPRING AT STOCK REV CUT OR AQR25-SPRNG SPRING SET IF RUNNING TO 7200RPM.
FITS:
S1 Cam - Excellent street cam, good power and idle. Go with the best, JWT Learn More
ALTIMA, SENTRA, ALTIMA 2002+, SENTRA 2.5L,
ENGINES:
QR25DE, -
IN-CHASSIS VALVE SPRING COMPRESSOR fits most VQ, KA, QR, & VK engines
$92.99IN-CHASSIS VALVE SPRING COMPRESSOR fits most VQ, KA, QR, & VK engines Learn More -
2JR Siemens/Deka 633cc Injectors (also for JWT Turbo Reflash)
$249.99The best injector for your boosted B15. For HP up to 360whp, and specifically tuned for JWT's 02-03 Turbo Reflash. Dont settle for inferior redrilled injectors (deatschwerks). These are genuine, reliable siemens Injectors with excellent response characteristics. These injectors flow 60 lbs/hr at 43.5 PSI ( 3 BAR ) and up to 85 lbs/hr at 87 PSI. A perfect match for nearly all B15 turbo applications. Choose the direct fit connectors for no splicing to your stock wiring harness. Just plug and play! Learn More -
JWT QR25 HEAVY DUTY CLUTCH SET
$326.42QR25 HEAVY DUTY CLUTCH SET WITH 50% HIGHER CLAMPING FORCE THAN STOCK AND A 10M.M. OUTSIDE DIAMETER INCREASE. YOU MUST USE THE JWT ALUMINUM FLYWHEEL WITH THIS CLUTCH. Learn More -
JWT QR25DE Balance Shaft Removal Kit (BSR)
Regular Price: $129.99
Special Price $109.99
Must have for any lightly modified and/or turbo QR. The Balancer Shaft Removal kit is a must for high RPM performance. The QR25DE comes equipped with a balancer shaft assembly that spins at twice engine speed to generate an opposing inertial mass. Increases oil capacity by 1.5qts Learn More -
VQ35 C-2 JWT CAMSHAFT SET
$1,386.33C-2 JWT CAMSHAFT SET VQ35 261 DEG. / .456" (11.58MM) LIFT RACE CAM SET FOR NA AND BOOSTED ENGINES. JWT Valve Springs and Shims are REQUIRED Learn More -
S1 CAM SET FOR VQ35DE
$1,269.00JWT S1 BILLET CAMS ADD 15+HP WHILE MAINTAINING EXCELLENT DRIVABILITY AND GOOD IDLE QUALITY. EVEN MORE AWESOME WHEN COMBINED WITH A TUNED EXHAUST AND OUR POP-CHARGER INTAKE SYSTEM. Learn More -
S2 CAM SET FOR VQ35DE
$1,269.00JWT S2 BILLET CAMS ADD 15+HP WHILE MAINTAINING EXCELLENT DRIVABILITY AND IDLE QUALITY. EVEN MORE AWESOME WHEN COMBINED WITH A TUNED EXHAUST AND OUR POP-CHARGER INTAKE SYSTEM. Learn More -
VQ35 C-8 JWT CAMSHAFT SET
$1,386.33High HP, Racing cam set. 272 DEG/.473 Must use JWT Valve Springs Learn More -
VQ35 C-9 JWT CAMSHAFT SET
$1,386.33Ultimate Race Cam for your VQ35 / 283.5 DEG/.516" MUST USE WITH JWT SPRING/SHIM SET Learn More -
VQ35 C-10 JWT CAMSHAFT SET
$1,386.33The biggest cam ever produced by JWT. MUST USE WITH JWT SPRING/SHIM, DOES NOT FIT REV-UP MOTOR (REQUIRES HEAD CLEARANCING) Learn More -
JWT LIGHTWEIGHT FLYWHEEL MAXIMA/ALTIMA VQ35
$491.27V6 Altima / Maxima aluminum flywheel weighing in at 15 lbs. Learn More -
JWT VQ35 MAXIMA/ALTIMA CLUTCH KIT
$529.48350Z / G35 HIGH CLAMPING FORCE CLUTCH SET. 1200KG clamping force and a smooth organic disc makes this the best choice for street / track, including boosted cars! Learn More -
B16 Sentra 2.5L Catback Exhaust (2007-2012)
Regular Price: $779.00
Special Price $689.98
Step up your power goals with a hand-made, tig welded, catback exhaust from 2JR for for your 07-12 Nissan Sentra. Specifically designed for the Second Gen QR25 B16 Chassis (Sentra), this is the best exhaust system available. Made from stainless steel and available in either a 2.5 (quietest) or 3.0 piping size. We use Magnaflow resonators and mufflers with a resonated carbon fiber tip. Bolts to the OEM midpipe for 2.5 systems. You must use the 2JR 3" midpipe for the 3" catback version. Sounds amazing with the 2JR MB16 Medusa Header, Midpipe and 2.5" catback. Huge power increases, deep - clean sound without rasp. Learn More -
2JR B16 SpecV Midpipe - 70mm Stainless
Regular Price: $249.99
Special Price $194.98
2JR Stainless 70mm Midpipe for the B16 SpecV - fits the MB16 Header as well as the stock header (or any aftermarket header for the B16 SpecV). Made from 304 Stainless Steel with a flex section for long life during hard launches at the track. Step up from the OEM 2" midpipe to a 70mm midpipe from 2JR. Learn More
