Search results for '2011 altima'
-
PRE ORDER B15 V2 Long Runner Medusa UEL Header
Through continuous testing 2JR has improved the already dominate Medusa header with performance upgrades. Port changes to Oval Head Port Matched Flanges for a perfect seal - Longer runners by 4" over the V1 Medusa produce a higher mid-high rpm HP performance. And stepped runner design from 1.7" to 1.9" from the Spyder header help improve scavenging and broaden the torque curve. The V2 Medusa is UEL (unequal length) and provides a "boxer-like" rumble at idle and under throttle. Comes with Billet Aluminum Alternator Clearance Bracket. You will need one slim fan (included) to run this header because of its size and runner design. It will bolt to the OEM midpipe or the 2JR 2.5 or 3" midpipe. You can remove the fan and ACB option and save an additional $74! Make sure you have these parts already. For a quick install - select the 2JR Plug and Play Fan Wire kit To install the fan - the factory clip has 4 wires, the top two are position (looking at where the clip is) and the bottom two are neg. Connect the blue fan wire to the top two + pos wires and the black 2J fan wire to the bottom two - wires. Fits all 02-06 Sentras and Altimas - qr25de only. Learn More -
QR25 JWT Beehive Spring
$244.48QR25DE JWT BEEHIVE SPRING FOR USE WITH JWT COMPETITION CAMSHAFTS TO .600" LIFT. MUST USE RETAINER ARETN-BHIVE ON EARLY ENGINES. 35.96mm INSTALLED HEIGHT, USE ORIGINAL SPRING BASE SHIMS. Complete set FITS: ALTIMA 2002+, SENTRA 2.5L ENGINES: QR25DE Learn More -
QR25 JWT CAMSHAFT SET C1 BILLET CAMS
Regular Price: $699.98
Special Price $649.98
Ultimate in cams for your QR motor. Go big with the C1s.CAMSHAFT SET QR25DE C1 BILLET CAMS, BETTER THAN THE JWT S1 CAMS ABOVE 3500 RPM WHEN USED WITH 2J RACING LONG TUBE HEADER, 3" COLLECTOR AND LOW RESTRICTION EXHAUST SYSTEM. THERE IS ANOTHER 10-15 HP POTENTIAL BEYOND THE JWT S1 CAMS FOR A COMPETITION ENGINE. C1 IS A LARGE PROFILE
FITS: ALTIMA 2002+, SENTRA 2.5L B15 and B16,
ENGINES: QR25DE,
Suggested to use Brian Crower Valve Springs Install Instructions http://www.jimwolftechnology.com/wolfpdf/CAM_ASER2-QRNC1_HEAD_CLEARANCING_INST.pdf http://www.jimwolftechnology.com/wolfpdf/CAMSHAFT_INSTALL_QR25DE_INSTRUCTIONS.pdf Learn More -
QR25 JWT CAMSHAFT SET S1 BILLET CAMS
Regular Price: $699.99
Special Price $649.98
CAMSHAFT SET QR25DE BILLET CAMS. GOOD IDLE AND DRIVABILITY WITH AN 8+HP GAIN. USES STOCKS SPRING AT STOCK REV CUT OR AQR25-SPRNG SPRING SET IF RUNNING TO 7200RPM.
FITS:
S1 Cam - Excellent street cam, good power and idle. Go with the best, JWT Learn More
ALTIMA, SENTRA, ALTIMA 2002+, SENTRA 2.5L,
ENGINES:
QR25DE, -
IN-CHASSIS VALVE SPRING COMPRESSOR fits most VQ, KA, QR, & VK engines
$92.99IN-CHASSIS VALVE SPRING COMPRESSOR fits most VQ, KA, QR, & VK engines Learn More -
JWT QR25 HEAVY DUTY CLUTCH SET
$326.42QR25 HEAVY DUTY CLUTCH SET WITH 50% HIGHER CLAMPING FORCE THAN STOCK AND A 10M.M. OUTSIDE DIAMETER INCREASE. YOU MUST USE THE JWT ALUMINUM FLYWHEEL WITH THIS CLUTCH. Learn More -
JWT QR25DE Balance Shaft Removal Kit (BSR)
Regular Price: $129.99
Special Price $109.99
Must have for any lightly modified and/or turbo QR. The Balancer Shaft Removal kit is a must for high RPM performance. The QR25DE comes equipped with a balancer shaft assembly that spins at twice engine speed to generate an opposing inertial mass. Increases oil capacity by 1.5qts Learn More -
VQ35 C-2 JWT CAMSHAFT SET
$1,386.33C-2 JWT CAMSHAFT SET VQ35 261 DEG. / .456" (11.58MM) LIFT RACE CAM SET FOR NA AND BOOSTED ENGINES. JWT Valve Springs and Shims are REQUIRED Learn More -
S1 CAM SET FOR VQ35DE
$1,269.00JWT S1 BILLET CAMS ADD 15+HP WHILE MAINTAINING EXCELLENT DRIVABILITY AND GOOD IDLE QUALITY. EVEN MORE AWESOME WHEN COMBINED WITH A TUNED EXHAUST AND OUR POP-CHARGER INTAKE SYSTEM. Learn More -
S2 CAM SET FOR VQ35DE
$1,269.00JWT S2 BILLET CAMS ADD 15+HP WHILE MAINTAINING EXCELLENT DRIVABILITY AND IDLE QUALITY. EVEN MORE AWESOME WHEN COMBINED WITH A TUNED EXHAUST AND OUR POP-CHARGER INTAKE SYSTEM. Learn More -
JWT LIGHTWEIGHT FLYWHEEL MAXIMA/ALTIMA VQ35
$491.27V6 Altima / Maxima aluminum flywheel weighing in at 15 lbs. Learn More -
JWT VQ35 MAXIMA/ALTIMA CLUTCH KIT
$529.48350Z / G35 HIGH CLAMPING FORCE CLUTCH SET. 1200KG clamping force and a smooth organic disc makes this the best choice for street / track, including boosted cars! Learn More -
Nissan Sentra Lightweight Racing Pulley 2.5L, QR25DE, Fits Sentra, Altima, Frontier
Regular Price: $129.99
Special Price $99.98
Nets 5whp/5wtq! 2JR introduces a lightweight solid billet 6061 racing pulley that weighs 80% less than the stock pulley (5.1 lbs vs 1lb 2JR), which translates into less rotational mass and quicker revving. All pulleys are built with the factory timing marks and DO NOT require a belt change. This is a simple bolt on for more power in less than 30mins. Fits all 2.5L Sentra B15, Sentra B16, Altima and Frontier
Choose between Red/Blue/Black. Also available with 2JR Powersteering pulley for all 02-06 2.5L QRs. Learn More -
2JR Underdrive Lightweight Power Steering Pulley (QR25)
Regular Price: $89.99
Special Price $69.98
2JR releases the lightest power steering pulley ever made for the B15. The underdrive size increases the torque and horsepower output of the QR25 by reducing parasitic drag caused by the belt-driven power steering, but more importantly by reducing the moment of inertia. Excellent steering feel and with a more weighted response in the wheel. No more pump cavitation during extreme cornering. Color:Blue, Black or Red Hard Anodized, 2JR Logo Weighs just 11oz!! Dayco poly rib #5060895 belt REQUIRED. Or similar 89.5" length belt Fits 02-06 Nissan Sentra SE-R & Spec-V (2.5L) 02-06 Nissan Altima 2.5L Does not fit B16s Learn More -
OEM Nissan B15 QR25 Full Engine Rebuild Kit (02-06)
Regular Price: $629.99
Special Price $589.98
Full rebuild kit for your Gen 1 (02-06 Sentra, Altima) QR25 that includes everything you need to rebuild your QR yourself. DOES NOT FIT THE FRONTIER
Headgasket
Intake manifold gasket
Exhaust manifold gasket
Valve cover gasket
Valve stem seals
All necessary O-rings
Front seal and rear main sealMain and Rod Bearings
10 Head Bolts
Oil Pump / Water Pump
Cam and Crank Sprockets
Main Timing Chain
Main Tensioner
All Chain Guide Rails
Learn More -
Brian Crower High RPM Valve Springs - QR25DE (all models)
Regular Price: $139.98
Special Price $129.78
Brian Crower High RPM Valve Springs - QR25DE (all models) * Valvesprings Designed for high rpm, Brian Crower valve springs are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures (chamfer, debur, etc...) for consistent pressures over long term, high rpm usage. Quality valve springs are critical in the prevention of premature valve float. * Retainers The ultimate in lightweight high performance, Brian Crower titanium retainers typically weigh in approximately 40% less than the factory OEM steel units. CNC machined for premium 6AL4V titanium bar stock to exacting tolerances. * Spring/Retainer Kits Brian Crower valve spring and titanium retainers kits are system matched to work in unison to deliver better valve control at extended rpm's and allow for greater lift camshafts for added performance and reliability. Fits all QR25DE models 2002 - 2013 ALTIMA 2005 - 2012 FRONTIER 2008 - 2012 ROGUE 2002 - 2012 SENTRA 2005 - 2006 X-TRAIL Learn More -
Sentra/Maxima 2JR Nismo Short Throw Shifter / optional Shifter Bushings
Regular Price: $99.99
Special Price $65.98
Nismo-style short throw billet shifter (STS) for the 2002-2006 Sentra B15 and 2002-2003 Altima/Maxima. Reduces throw by 30% without causing stress on the shifter cables which can lead to breakage. Provides a more direct, positive shift for each gear. Downside is a slight "tink" when shifting due to the billet shifter assembly. Excellent upgrade for your Nissan, especially when paired with 2JR's delrin Shifter Bushings Available in red or black The STS can used on stock Nissan shifter bushings or with 2JR's delrin shifter bushings as a combo kit. CNC'd from delrin. Replaces factory rubber bushings on the transmission with solid bushings for a more direct and crisp shift. These are the best bushings 2JR has ever produced. They will never wear out, never need grease, and never absorb water and corrode. Includes Interior and Transmission Bushings (6 pieces) ONLY FITS 2002-2006 Sentras 2002-2003 Maximas/Altimas (runs 04 interior bushing kit / 02 trans kit) Learn More -
Fiesta ST - Wilwood Front Big Brake Kit
Regular Price: $1,059.98
Special Price $969.78
Fits Fiesta ST and all Fiesta models (2011- current) The enhanced brake capacity and pad performance of the DynaPro 6 forged billet six-piston caliper is combined with 12.19” diameter rotors for this group of front wheel drive sport compact kits. These kits are the perfect compliment to wheel, tire, and suspension upgrades on daily drivers, competition vehicles, and custom styled show machines. Each kit is engineered vehicle specific to maintain full compatibility with the OE master cylinder output and factory ABS functions. Optional caliper finishes and rotor designs enable the builder to personalize the style and optimize brake performance for every individual application. Fits all 17" rims - no spacers required. Some 16" rims will clear, please call to confirm. Wilwood Stainless Line Kit is REQUIRED for install (includes all fittings) 2JR allows you to choose your brake pad compound / Rotor Type / Caliper Color BP10 - Street BP20 - Street Performance BP-Q Street Performance / Very Low Dust / Low Noise (suggested) PolyMatrix B - Racing Pad Set (best for AutoX, Track Days) Kits may take approx 2-3 weeks to build/ship Brake Pad Info/Specs: http://www.wilwood.com/BrakePads/BrakePadsApp.aspx Learn More -
02-06 Sentra/02-03 Maxima/Altima Delrin Shifter Bushings
Regular Price: $69.99
Special Price $57.98
CNC'd from Delrin. Replaces factory rubber bushings on the transmission with solid bushings for a more direct and crisp shift. Includes Interior and Transmission Bushings (6 pieces). Optional Billet Aluminum Short Shifter can be added as a combo for 30% shorter shifts. ONLY FITS 2002-2006 Sentras 2002-2003 Maximas/Altimas (runs 04 interior bushing kit / 02 trans kitATTEN: CHECK THE PRODUCTION DATE OF YOUR SENTRA. IF ITS AN 04 MODEL PLEASE MEASURE YOUR BUSHINGS. If both the bushings on the transmission are the SAME SIZE 1.1" (outside diameter), then choose 02-03. If the top transmission bushing is larger than the lower bushing 1.4" and 1.1" respectively, then choose the 04-06. For any other year - you do not need to measure the bushing. Maximas/Altimas do not need to measure the bushing (2002-2003) Instructions: https://1drv.ms/b/s!AjQkUN52fS1SqSUMoguVkM_bn_n9?e=UbrtBj Learn More
-
QR25DE - ARP Head Stud Kit (all years)
Regular Price: $179.99
Special Price $159.99
Application: QR25DE - All years / Models (b15, b16, altima, rogue)Pro series cylinder head studs from ARP are cold-forged to ensure molecular integrity. They are heat-treated prior to thread rolling and machining and are rated at a whopping 200,000 psi for the 8740 material and 220,000 psi for ARP2000. ARP Pro series kits are also available with 12-point nuts, and all kits come complete with hardened parallel washers for an even load distribution and accurate torque readings.
Learn More