Search results for 'ac delete kit'
-
B15 13" Wilwood Superlite Brake Kit Slotted Spec37 Rotors
Regular Price: $1,699.99
Special Price $1,298.89
The big pad capacity of the forged Superlite four piston caliper is combined with oversized rotors for these unique kits. The roots of the forged Superlite are deep in competition. It is a track proven performer. These kits give high-tech style with full capability for extreme duty use on the street or at the track. The ultimate in braking power for your B15, we offer the best kit on the market at the best possible price. Wilwood brake kits consist of specifically engineered & matched groups of components designed to provide superior brake system performance & custom appeal over a wide range of applications. These Big Brake kits require at least 17" diameter wheels, and may require spacers. 02-03 Stock Wheels - run 20mm Spacers with 82mm Studs 04-06 Wheels - run 10mm Spacers with 55mm Studs Kit includes parts for both front wheels: * 1.10" Thick x 12.90" O.D. Rotors * Forged Superlite Brake Calipers * Caliper Mounting Brackets * BP-10 Smart Compound Brake Pads * Brake Hats * Wilwood Stainless Front Brake Lines Learn More -
B15 12.2" Wilwood 4 Piston Big Brake Kit (02-06 Sentra)
Regular Price: $1,079.98
Special Price $949.99
One of the best brake upgrades for the B15, and helped us to win a National Championship. Complete with Forged Billet Dynalite Calipers, 12.19" diameter rotors, and high performance Wilwood brake pads generate big brake stopping power to compliment wheel, tire, and suspension upgrades on your B15 Saves over 15lbs over the stock brakes - of unsprung weight!. INCLUDES STAINLESS FRONT LINES - AT NO CHARGE
These Big Brake kits require at least 16" diameter wheels.
Kit includes parts for both front wheels:
.810" Thick x 12.19" O.D. Two Piece Rotors
Forged Dynalite Calipers - Black or Red
2JR Caliper Mounting Brackets and all hardware with stainless brake lines
BP-20 Wilwood Smart Compound Brake Pads
* All Hardware necessary to install the complete braking system on both front wheels.
For 02-03 stock wheels you will need 2JR 15mm spacers and 55mm studs Learn More -
B14 / B15 / Maxima Panhard Rod - Rear Roll Center Correction
Regular Price: $1,250.00
Special Price $980.00
The height of the rear roll center is critical to handling. When you remove the OEM Link on the Nissan Twist Beam suspension and add a panhard bar the rear roll center drops. A lowered rear roll center promotes side bite at the rear which tends to tighten corner handling. 2J Exclusive! Price includes labor/installation. Panhard rod is not available for shipping. Learn More -
Nissan 55mm Full Race Wheel Studs - fits all models
Regular Price: $5.25
Special Price $3.68
We were asked to make these for the GTRs (we make their hubcentric wheel spacers) and we are offering these for the Sentras as well. This is a true racing wheel stud with rounded ends for wheel changes without damaging the threads. It also allows you to set your lug nuts on the studs for quick install with an impact gun. All the specs were designed with the GTR in mind, thread length, strength, material and longevity. These aren't black, zinc coated studs that quickly rust. These studs will never rust and can handle 25mm of increased track width per side. 55mm, Forged Chromoly SCM435. Also available in 82mm SOLD AS EACH $59 for pack of 16. Learn More -
B15 12.3" Rear Big Brake Kit
Regular Price: $399.99
Special Price $299.99
Improve your stopping performance by 140% with our 12.3" Rear Brakes! This is the ultimate Rear Brake Setup for your B15, used on our race car to haul down speeds in excess of 160mph. This kit replaces the small stock 10" rear rotors with 12.3" rotors and brackets for excellent street and track performance. Slotted and drilled and Black E-coated for no rust and long life. Includes all hardware. Bolts directly to your stock caliper with 2JR supplied hardware. 3 years of racing and 2JR has yet to wear out 1 set of these rotors. Learn More -
Phenolic Thermal Intake Manifold Spacer Kit (VQ35DE)
$225.00Gains of 10hp and 12ft-lb of torque!
Average intake manifold temperature decrease of 40 degrees!Prevent heat from transferring from your heads to intake manifold and throttle body. Improve Airflow by eliminating the need for intake gaskets. Each spacer is CNC Machined to the highest tolerances to ensure the best airflow possible
Learn More -
VIAS Block Plate Kit (VQ35DE)
Regular Price: $49.99
Special Price $40.00
- 1/4" High Quality CNC Machined Variable Intake Actuator Block Plate with engraved logo (Made from 6061 Billet Aluminum) - 3 Properly Sized Zinc Plated Flange Bolts - VIAS Control Solenoid Valve Vacuum Cap - Printed Detailed Installation Instructions with Photos - Two Die Cut Silver Vinyl NWP Engineering Decals Learn More -
B15 JWT Turbo Reflash (02-03)
$595.99Finally a JWT reflash for your turbo 02-03 B15 ECU (QR25). Good for up to 350whp. For best performance, must match up with our 2JR injectors as the tune is based specifically off these injectors. Lead time is approximately 3 weeks for a reflash once the ECU is received.Reflashes your 02-03 Spec-V ECU for:
- 2JR Siemens Injectors
- Stock MAF
- 9.5-1 or 8.5-1 Compression
- Speed Limiter Removal
- Increased Rev Limiter
-
B15 JWT N/A Reflash 02-03 Spec-V
Regular Price: $329.99
Special Price $299.99
Custom reflash by JWT to removes your speed limiter and raised the rev limit to your choice. For 02-03 ECUs ONLY. JWT turn around time is min 3 weeks. We also offer a core swap. We send in our 02-03 ECU to be flashed. Once complete JWT will send it to you and you return your working 02-03 ECU to us. Core is $375, less $25 shipping. You'll receive a $350 refund when your ECU is received back. CORE SWAP ONLY FOR NON-NATS CARS! Learn More -
QR25 JWT CAMSHAFT SET C1 BILLET CAMS
Regular Price: $699.98
Special Price $649.98
Ultimate in cams for your QR motor. Go big with the C1s.CAMSHAFT SET QR25DE C1 BILLET CAMS, BETTER THAN THE JWT S1 CAMS ABOVE 3500 RPM WHEN USED WITH 2J RACING LONG TUBE HEADER, 3" COLLECTOR AND LOW RESTRICTION EXHAUST SYSTEM. THERE IS ANOTHER 10-15 HP POTENTIAL BEYOND THE JWT S1 CAMS FOR A COMPETITION ENGINE. C1 IS A LARGE PROFILE
FITS: ALTIMA 2002+, SENTRA 2.5L B15 and B16,
ENGINES: QR25DE,
Suggested to use Brian Crower Valve Springs Install Instructions http://www.jimwolftechnology.com/wolfpdf/CAM_ASER2-QRNC1_HEAD_CLEARANCING_INST.pdf http://www.jimwolftechnology.com/wolfpdf/CAMSHAFT_INSTALL_QR25DE_INSTRUCTIONS.pdf Learn More -
IN-CHASSIS VALVE SPRING COMPRESSOR fits most VQ, KA, QR, & VK engines
$92.99IN-CHASSIS VALVE SPRING COMPRESSOR fits most VQ, KA, QR, & VK engines Learn More -
2JR Siemens/Deka 633cc Injectors (also for JWT Turbo Reflash)
$249.99The best injector for your boosted B15. For HP up to 360whp, and specifically tuned for JWT's 02-03 Turbo Reflash. Dont settle for inferior redrilled injectors (deatschwerks). These are genuine, reliable siemens Injectors with excellent response characteristics. These injectors flow 60 lbs/hr at 43.5 PSI ( 3 BAR ) and up to 85 lbs/hr at 87 PSI. A perfect match for nearly all B15 turbo applications. Choose the direct fit connectors for no splicing to your stock wiring harness. Just plug and play! Learn More -
JWT QR25DE Balance Shaft Removal Kit (BSR)
Regular Price: $129.99
Special Price $109.99
Must have for any lightly modified and/or turbo QR. The Balancer Shaft Removal kit is a must for high RPM performance. The QR25DE comes equipped with a balancer shaft assembly that spins at twice engine speed to generate an opposing inertial mass. Increases oil capacity by 1.5qts Learn More -
VQ35 C-2 JWT CAMSHAFT SET
$1,386.33C-2 JWT CAMSHAFT SET VQ35 261 DEG. / .456" (11.58MM) LIFT RACE CAM SET FOR NA AND BOOSTED ENGINES. JWT Valve Springs and Shims are REQUIRED Learn More -
VQ35 C-8 JWT CAMSHAFT SET
$1,386.33High HP, Racing cam set. 272 DEG/.473 Must use JWT Valve Springs Learn More -
VQ35 C-9 JWT CAMSHAFT SET
$1,386.33Ultimate Race Cam for your VQ35 / 283.5 DEG/.516" MUST USE WITH JWT SPRING/SHIM SET Learn More -
JWT VQ35 MAXIMA/ALTIMA CLUTCH KIT
$529.48350Z / G35 HIGH CLAMPING FORCE CLUTCH SET. 1200KG clamping force and a smooth organic disc makes this the best choice for street / track, including boosted cars! Learn More -
B16 Sentra 2.5L Catback Exhaust (2007-2012)
Regular Price: $779.00
Special Price $689.98
Step up your power goals with a hand-made, tig welded, catback exhaust from 2JR for for your 07-12 Nissan Sentra. Specifically designed for the Second Gen QR25 B16 Chassis (Sentra), this is the best exhaust system available. Made from stainless steel and available in either a 2.5 (quietest) or 3.0 piping size. We use Magnaflow resonators and mufflers with a resonated carbon fiber tip. Bolts to the OEM midpipe for 2.5 systems. You must use the 2JR 3" midpipe for the 3" catback version. Sounds amazing with the 2JR MB16 Medusa Header, Midpipe and 2.5" catback. Huge power increases, deep - clean sound without rasp. Learn More -
2JR B16 SpecV Midpipe - 70mm Stainless
Regular Price: $249.99
Special Price $194.98
2JR Stainless 70mm Midpipe for the B16 SpecV - fits the MB16 Header as well as the stock header (or any aftermarket header for the B16 SpecV). Made from 304 Stainless Steel with a flex section for long life during hard launches at the track. Step up from the OEM 2" midpipe to a 70mm midpipe from 2JR. Learn More -
B15 Treadstone MAF Adapter
$35.99The Treadstone mass air flow adapter manufactured for the Spec V kit was specificaly designed to seal under high boost pressures, and incorporates a bead rolled lip to keep couplers from blowing off and a rubber gasket. Learn More
