Search results for 'anti lift kit'
-
B15 13" Wilwood Superlite Brake Kit Slotted Spec37 Rotors
Regular Price: $1,699.99
Special Price $1,298.89
The big pad capacity of the forged Superlite four piston caliper is combined with oversized rotors for these unique kits. The roots of the forged Superlite are deep in competition. It is a track proven performer. These kits give high-tech style with full capability for extreme duty use on the street or at the track. The ultimate in braking power for your B15, we offer the best kit on the market at the best possible price. Wilwood brake kits consist of specifically engineered & matched groups of components designed to provide superior brake system performance & custom appeal over a wide range of applications. These Big Brake kits require at least 17" diameter wheels, and may require spacers. 02-03 Stock Wheels - run 20mm Spacers with 82mm Studs 04-06 Wheels - run 10mm Spacers with 55mm Studs Kit includes parts for both front wheels: * 1.10" Thick x 12.90" O.D. Rotors * Forged Superlite Brake Calipers * Caliper Mounting Brackets * BP-10 Smart Compound Brake Pads * Brake Hats * Wilwood Stainless Front Brake Lines Learn More -
B15 12.2" Wilwood 4 Piston Big Brake Kit (02-06 Sentra)
Regular Price: $1,079.98
Special Price $949.99
One of the best brake upgrades for the B15, and helped us to win a National Championship. Complete with Forged Billet Dynalite Calipers, 12.19" diameter rotors, and high performance Wilwood brake pads generate big brake stopping power to compliment wheel, tire, and suspension upgrades on your B15 Saves over 15lbs over the stock brakes - of unsprung weight!. INCLUDES STAINLESS FRONT LINES - AT NO CHARGE
These Big Brake kits require at least 16" diameter wheels.
Kit includes parts for both front wheels:
.810" Thick x 12.19" O.D. Two Piece Rotors
Forged Dynalite Calipers - Black or Red
2JR Caliper Mounting Brackets and all hardware with stainless brake lines
BP-20 Wilwood Smart Compound Brake Pads
* All Hardware necessary to install the complete braking system on both front wheels.
For 02-03 stock wheels you will need 2JR 15mm spacers and 55mm studs Learn More -
B15 12.3" Rear Big Brake Kit
Regular Price: $399.99
Special Price $299.99
Improve your stopping performance by 140% with our 12.3" Rear Brakes! This is the ultimate Rear Brake Setup for your B15, used on our race car to haul down speeds in excess of 160mph. This kit replaces the small stock 10" rear rotors with 12.3" rotors and brackets for excellent street and track performance. Slotted and drilled and Black E-coated for no rust and long life. Includes all hardware. Bolts directly to your stock caliper with 2JR supplied hardware. 3 years of racing and 2JR has yet to wear out 1 set of these rotors. Learn More -
Phenolic Thermal Intake Manifold Spacer Kit (VQ35DE)
$225.00Gains of 10hp and 12ft-lb of torque!
Average intake manifold temperature decrease of 40 degrees!Prevent heat from transferring from your heads to intake manifold and throttle body. Improve Airflow by eliminating the need for intake gaskets. Each spacer is CNC Machined to the highest tolerances to ensure the best airflow possible
Learn More -
VIAS Block Plate Kit (VQ35DE)
Regular Price: $49.99
Special Price $40.00
- 1/4" High Quality CNC Machined Variable Intake Actuator Block Plate with engraved logo (Made from 6061 Billet Aluminum) - 3 Properly Sized Zinc Plated Flange Bolts - VIAS Control Solenoid Valve Vacuum Cap - Printed Detailed Installation Instructions with Photos - Two Die Cut Silver Vinyl NWP Engineering Decals Learn More -
JWT QR25DE Balance Shaft Removal Kit (BSR)
Regular Price: $129.99
Special Price $109.99
Must have for any lightly modified and/or turbo QR. The Balancer Shaft Removal kit is a must for high RPM performance. The QR25DE comes equipped with a balancer shaft assembly that spins at twice engine speed to generate an opposing inertial mass. Increases oil capacity by 1.5qts Learn More -
JWT VQ35 MAXIMA/ALTIMA CLUTCH KIT
$529.48350Z / G35 HIGH CLAMPING FORCE CLUTCH SET. 1200KG clamping force and a smooth organic disc makes this the best choice for street / track, including boosted cars! Learn More -
B15 Treadstone MAF Adapter
$35.99The Treadstone mass air flow adapter manufactured for the Spec V kit was specificaly designed to seal under high boost pressures, and incorporates a bead rolled lip to keep couplers from blowing off and a rubber gasket. Learn More -
2JR 25mm Fully Adjustable Rear Sway Bar (B15)
Regular Price: $349.99
Special Price $299.98
2JR 25mm Fully Adjustable Rear Sway Bar (B15)The best rear sway bar ever created for the B15 chassis (fits all models) is now available through 2JR. Massive 25mm fully adjustable rear bar, installs in under 45m with no drilling required. Improve lateral stiffness and cornering. 200% more torsional rigidity than the Eibach rear sway bar. For the best street and track performance, this is the bar you want. Only available in a limited run.
Now Combo Options with either SuperPro Rear Bushings or Full SuperPro Rear Bushing Kit that includes the Rear Trailing Arm bushings and all the bushing in the Scott Russell Link/ - inc the dog bone Learn More
-
2JR Forged Steel Flywheel - QR25DE 14lbs
Regular Price: $419.99
Special Price $299.99
2JR introduces an American Made lightweight steel flywheel (ST) is recommended for all QR25 clutch kits. Perfect flywheel for upgrading over the massively heavy OEM dual mass flywheel which is prone to split apart and break. Recommended for naturally aspirated and or street driven applications. This flywheel preserves low end torque and drivability. Well suited for our Stage II, III, and IV clutch kits. Direct bolt on and fits OEM size clutches (9.25" disk and 2JR clutches with 9.5" disks). Stock Flywheel is 28lbs. Saves 14lbs! For Gen1 QRs (02-06) Learn More -
2JR Lower Control Arms with SuperPro Bushings
Regular Price: $501.99
Special Price $439.98
STAGE I - Custom for 2JR, 95 Duro SuperPro Bushing set - already installed in new LCAs with NEW 555 Japanese (JDM) Ball Joints. STAGE II - You can also add the 2JR Full Race Tall Ball Joints (Roll Center Kit RCK) See options below. The RCK and Bump Steer Kit must be used together as they MUST work in tandem to align the suspension correctly. If the RCK/Bump option isnt check, the LCAs will ship with 555 JDM ball joints. Includes both Left and Right Arms, all new arms, ball joints and SuperPro double offset caster bushings. SuperPro: 2JR introduces a special line of Front Lower Control Arm bushings for your B15 (all models). We contracted SuperPro to make the front LCA bushings in its highest durometer available at 95K for the front bushings. This is a 200% improvement over stock and 140% stronger than ES bushings and standard SuperPro bushings. For the rear section of the LCA we added double caster offset bushings set in a steel sleeve with 95K duro interference bushing to keep the Rear LCA mount solid and prevent any flex under load. Increased caster provides straight line stability. These are the best street/strip LCA bushings we've ever tested. Allow 7-10 days for production of the LCAs. These are made to order Learn More -
2JR Hi-Power Intake Plenum-Full Kit
Regular Price: $899.99
Special Price $699.00
2JR introduces the best intake plenum for your 1st gen QR with custom CNC milled throttle plates, machined and decked head surfaces to maximize power and gains while providing no ECU fault codes or issues. Huge mid range gains with excellent top end performance. No tune is required. For both NA (low and high comp) and forced induction applications (up to 20psi). Expect quicker throttle response and improved driveability. Both on and off the street. Includes a new high-capacity fuel rail and all hardware necessary for a complete install. Optional is our 2JR 1-piece Moto-style cold air intake. Save over $45 when you purchase both together. NOTE! IF YOU ADD THE 76MM PLENUM SPACER MOD - YOU DONT NEED THE 5" SILICON COUPLER. The plenum spacer mod adds a ton of volume to the hi-power plenum. Its a MUST HAVE! OVER 28whp in the midrange. The highest hp mod available for the B15. Install instructions: https://www.facebook.com/206550699368164/videos/148839433766275 Learn More -
2JR SuperPro Front LCA Bushing Kit ONLY
Regular Price: $314.99
Special Price $251.99
2JR introduces a special line of Front Lower Control Arm bushings for your B15 (all models). We contracted SuperPro to make the front LCA bushings in its highest durometer available at 95K for the front bushings. This is a 200% improvement over stock and 140% stronger than ES bushings and standard SuperPro bushings. For the rear section of the LCA we added double caster offset bushings set in a steel sleeve with 95K duro interference bushing to keep the Rear LCA mount solid and prevent any flex under load. Increased caster provides straight line stability. These are the best street/strip LCA bushings we've ever tested. In stock and shipping daily. The kit includes the front and rear bushings ONLY. We also offer these bushings installed in new LCAs Learn More -
2JR Stage II Sprung Clutch Kit (350whp) - B15
Regular Price: $429.99
Special Price $369.99
No other clutch is built this well at this price and comes with a very easy clutch pedal. Not stiff or harsh, feels like STOCK! 2JRacing has partnered with the best American Made clutch manufacturer that specializes in sport compact clutches from street driven to full race applications. These clutches are proudly used in some of the fastest sport compact race cars in the county, including a number of the most recognized industry icon vehicles. These clutches represent the finest materials, workmanship and the best customer service in the industry. Offering the higher clamping force, stronger disk designs and uncompromised satisfaction, all at the most competitive pricing. Stage II High Performance Carbon Ceramic Clutch Kit 125% Increase in clamping force Carbon and ceramic material with a performance pressure plate provides the best streetable clutch on the market today for your Nissan. This assembly is suited for 350whp and provides extended life, easy engagement and great drivability Optional Rigid Disk for more longevity and clamping power while feeling stock - Our Choice! ALL CLUTCH KITS COMES WITH THROW OUT BEARING AND ALIGNMENT TOOL Learn More -
2JR STAGE IV Clutch Kit (550whp) - QR25DE and VQ35DE
Regular Price: $454.99
Special Price $399.99
2JRacing has partnered with the best American Made clutch manufacturer that specializes in sport compact clutches from street driven to full race applications. These clutches are proudly used in some of the fastest sport compact race cars in the county, including a number of the most recognized industry icon vehicles. These clutches represent the finest materials, workmanship and the best customer service in the industry. Offering the higher clamping force, stronger disk designs and uncompromised satisfaction, all at the most competitive pricing. Stage IV Drag / Road Course Series No other clutch is built this well at this price and comes with a very easy clutch pedal. Not stiff or harsh, pedal feels like STOCK! 250% Increase in clamping force Ceramic Six Rivet Carriage is good for ease of gear transition with higher horsepower. Withstands heavy launches and continuous track duty without overheating. Can be used on the street as well. Spec - 550whp / 500ft/tq Only available in 9.5" Disk for VQ35 and QR25 (with 2JR or JWT Flywheel). This clutch will not work on QR25DE with STOCK or FIDANZA Flywheels!! Can be ordered as a combo with the 2JR Flywheel (fits only QR25DE). ALL CLUTCH KITS COMES WITH THROW OUT BEARING AND ALIGNMENT TOOL Learn More -
Direct Fit - Bosch Motorsports Injector Set -300-650whp (Nissan Denso)
Regular Price: $349.00
Special Price $279.99
2JR is proud to offer Bosch Motorsports injectors for your Nissan. Direct fitment with Denso Clip, no cutting or splicing of your stock harness. Extremely excellent at low speed for a stable and solid idle. Same height as stock and offers a dual spray pattern for less wall-wash - direct to port spray pattern. Easily Tunable. Same injectors used in our 600whp Turbo kits Go with the best injectors for your Nissan - go with Bosch Motorsports from 2JR Sizes available 440CC 850CC 1000CC 1450CC Learn More -
OEM Nissan B15 QR25 Full Engine Rebuild Kit (02-06)
Regular Price: $629.99
Special Price $589.98
Full rebuild kit for your Gen 1 (02-06 Sentra, Altima) QR25 that includes everything you need to rebuild your QR yourself. DOES NOT FIT THE FRONTIER
Headgasket
Intake manifold gasket
Exhaust manifold gasket
Valve cover gasket
Valve stem seals
All necessary O-rings
Front seal and rear main sealMain and Rod Bearings
10 Head Bolts
Oil Pump / Water Pump
Cam and Crank Sprockets
Main Timing Chain
Main Tensioner
All Chain Guide Rails
Learn More -
B15 Handling Pack - RCK and UPGRADED Bump Steer Kit
Regular Price: $329.99
Special Price $199.98
NOTE! YOU MUST TRIM THE FRONT OF THE LCA TO CLEAR THE ROTOR WHEN USING THE RCK with Brembo OEM Brakes. 1mm-2mm of CLEARANCE REQUIRED! Our kit is designed to raise the front roll-center geometry by using specially engineered ball-joints in combination with our 2JR Bump Steer Kit Tie Rod Ends while still maintaining original steering geometry. Sentra McPherson front roll geometry gets worse and worse the lower you go with your B15. Coilovers, sway bars and our LCAs help but dont fix the problem. Our testing proved that raising the front roll-center resulted in a substantial increase to front roll resistance and a huge reduction in suspension compression of the outside front wheel during cornering (less roll). This improves weight distribution & maintains a better camber angle which ultimately improves front grip. The overall outcome is significantly reduced understeer through reduced front wheel compression as well as improved steering precision & vehicle stability. The 2JR RCK MUST be used with our UPGRADED BUMP STEER KIT. So the steering tie rod angle matches the lower control arm angle. Easily accomplished with our spacers included in the Bump Steer Kit. No more twitchy, hyper-active steering. This is for the street, drag, autox and track. For cars that are lowered more than 1/2" over stock. Learn More -
2JR Complete 5 Lug Conversion Kit (5x114.3)
Regular Price: $499.00
Special Price $429.99
Includes: (all NEW / MACHINED PARTS) for 5x114.3 1. Pair Front Hubs 2. Pair Rear Hubs 3. Front Timken Race Wheel Bearings, Pair 4. Forged Aluminum Rear Sleeves 5. Choice of 82mm or 55mm 2JR Race Studs Rotors are OPTIONAL! Learn More -
Sentra/Maxima 2JR Nismo Short Throw Shifter / optional Shifter Bushings
Regular Price: $99.99
Special Price $65.98
Nismo-style short throw billet shifter (STS) for the 2002-2006 Sentra B15 and 2002-2003 Altima/Maxima. Reduces throw by 30% without causing stress on the shifter cables which can lead to breakage. Provides a more direct, positive shift for each gear. Downside is a slight "tink" when shifting due to the billet shifter assembly. Excellent upgrade for your Nissan, especially when paired with 2JR's delrin Shifter Bushings Available in red or black The STS can used on stock Nissan shifter bushings or with 2JR's delrin shifter bushings as a combo kit. CNC'd from delrin. Replaces factory rubber bushings on the transmission with solid bushings for a more direct and crisp shift. These are the best bushings 2JR has ever produced. They will never wear out, never need grease, and never absorb water and corrode. Includes Interior and Transmission Bushings (6 pieces) ONLY FITS 2002-2006 Sentras 2002-2003 Maximas/Altimas (runs 04 interior bushing kit / 02 trans kit) Learn More
