Search results for 'Juke nismo'
-
Stage 3 - SR / Nismo Catback + Midpipe + CAI + FMIC
Regular Price: $1,679.98
Special Price $1,498.78
Stage 3 - SR / Nismo Catback + Midpipe + CAI + FMIC Includes: 2JR Carbon Catback 2JR Midpipe w/defouler 2JR Full Cold Air Intake 2JR Full FMIC with Hard Piping Kit Big power gains / no check engine lights / retains the factory front cat / amazing sound without the rasp. Looking for the best sound, performance and quality for your 2017-2019 Nismo Sentra SR and Nismo (1.6L Turbo)? Look no further than our hand-tig welded 2.5" stainless catback with 3.5" Carbon/Blue tip. Includes a long front resonator to remove the rasp and produce that deep, clean sound you've been searching for. It also comes with 3 hard hangers for the tail section, stainless hardware and gaskets for a complete bolt-on system. Remember, the factory turbo exhaust is a mere 49mm - and highly restrictive under boost. Unless your car's potential with 2JR. 2JR Nismo Intake relocates the filter outside of the engine compartment to deliver cool air inlet temperatures. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horsepower and torque. 2JR Sprint Series FMICs are designed to be used on the street or track with no limitations in performance and to be a complete drop in kit. Kit includes all the hard piping! From the turbo to the throttle body. Complete kit! Features and Benefits: - Direct fit for the 2017-2020 Nissan Sentra B17 Turbo(SR and Nismo models) - 27" Long intercooler design optimized for maximum flow - No modification to front bumper and retains stock fog lights - Maximum cooling efficiency with minimal pressure drop - Max power gains of 19HP and 22 feet per pounds of torque - Drops intercooler outlet temperatures by 38°F - Increases core size by 138% and fin surface area by 42% All the hardware required to complete your installation is likewise included. Learn More -
Stage 2 - SR / Nismo Catback + Midpipe + Cold Air Intake
Regular Price: $929.98
Special Price $879.98
Stage 2 - SR / Nismo Catback + Midpipe + Cold Air Intake Includes: 2JR Carbon Catback 2JR Midpipe w/defouler 2JR Full Cold Air Intake Big power gains / no check engine lights / retains the factory front cat / amazing sound without the rasp. Looking for the best sound, performance and quality for your 2017-2019 Nismo Sentra SR and Nismo (1.6L Turbo)? Look no further than our hand-tig welded 2.5" stainless catback with 3.5" Carbon/Blue tip. Includes a long front resonator to remove the rasp and produce that deep, clean sound you've been searching for. It also comes with 3 hard hangers for the tail section, stainless hardware and gaskets for a complete bolt-on system. Remember, the factory turbo exhaust is a mere 49mm - and highly restrictive under boost. Unless your car's potential with 2JR. 2JR Nismo Intake relocates the filter outside of the engine compartment to deliver cool air inlet temperatures. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horsepower and torque. Learn More -
Stage 1 - SR Turbo / Nismo 304 Stainless Catback + Midpipe
Regular Price: $798.89
Special Price $729.78
Stage 1 - SR Turbo / Nismo 304 Stainless Catback + Midpipe Includes: 2JR Carbon Catback 2JR Midpipe w/defouler Big power gains / no check engine lights / retains the factory front cat / amazing sound without the rasp. Looking for the best sound, performance and quality for your 2017-2019 Nismo Sentra SR and Nismo (1.6L Turbo) and 1.8L Non Turbo. Look no further than our hand-tig welded 2.5" stainless catback with 3.5" Carbon/Blue tip. Includes a long front resonator to remove the rasp and produce that deep, clean sound you've been searching for. It also comes with 3 hard hangers for the tail section, stainless hardware and gaskets for a complete bolt-on system. Includes Remember, the factory turbo exhaust is a mere 49mm - and highly restrictive under boost. Unless your car's potential with 2JR. Sound Clip Learn More -
T25 Turbo Adapter / Gen1 MR Engines
Regular Price: $269.00
Special Price $249.00
T25 Turbo Adapter / Gen1 MR Engines Designed to allow users of Gen1 MR16DDT engines (or those with the Gen1 Juke Turbo Manifold (2011-2014 / all RS Years) to mount a T25 Turbo to the factory manifold. Includes stainless hardware. This is the same adapter used in our 500hp Juke Builds. Confirm fitment on Pulsar, etc type vehicles. Material: Stainless Steel Adapter Size: T25 Learn More -
Bilstein B14 (PSS) FWD Juke Front & Rear Performance Suspension Kit (2.0 Drop)
Regular Price: $1,049.98
Special Price $998.78
Bilstein B14 (PSS) FWD Juke Front & Rear Performance Suspension Kit (2.0 Drop) Bilstein’s B14 PSS coil over kits feature threaded sections that allow you to raise or lower your vehicle within a 50mm range, giving a wide range of suspension tuning flexibility. Developed and fine-tuned to withstand rigorous track conditions, the B14 PSS coil over kits come with a set of precisely-calibrated springs to optimize ride and handling. Bilstein has set the standard in shock absorber and suspension components since they invented the first monotube gas-pressure shock in the 1950s. Developed to withstand tough track conditions Will lower ride height from 30-50mm A 50mm range of height adjustment Made with Bilstein’s renowned gas-pressurized monotube design Spring rates are carefully selected to match damper performance Coated with Triple-C-Technology for long-lasting corrosion protection Learn More -
RS-R Juke 4WD Turbo Down Sus Springs (1.4 Drop)
Regular Price: $309.98
Special Price $279.98
RS-R Juke 4WD Turbo Down Sus Springs (1.4 Drop) The RS-R Down Sus provides a lowered stance and improved handling to fulfill your needs to lower your car and improve its handling. Taking into consideration the factory suspension geometry, shock dampening, spring rate and ride height levels, RS-R ensures that the springs you are getting were made for your car both for performance and for comfort. Specifications: Approximate Drop: Front -30mm to -35mm (-1.2inch to -1.4inch) Rear -25mm to -30mm (-1.0inch to -1.2inch) Spring Rates: Front 2.87kg/mm Rear 7.07kg/mm Learn More -
RS-R Juke 2WD Turbo Down Sus Springs (1.6 Drop)
Regular Price: $309.98
Special Price $279.78
RS-R Juke 2WD Turbo Down Sus Springs (1.6 Drop) The RS-R Down Sus provides a lowered stance and improved handling to fulfill your needs to lower your car and improve its handling. Taking into consideration the factory suspension geometry, shock dampening, spring rate and ride height levels, RS-R ensures that the springs you are getting were made for your car both for performance and for comfort. Specifications: Approximate Drop: Front -30mm to -35mm (-1.2inch to -1.4inch) Rear -35mm to -40mm (-1.4inch to -1.6inch) Spring Rates: Front 2.35kg/mm Rear 5.10kg/mm Learn More -
2JR UpRev Juke Remote Tuning - Cable/License Not Included
Regular Price: $499.99
Special Price $479.98
2JR UpRev Juke Remote Tuning - Cable/License Not Included If you already have a USB Interface cable and license, and wish to have us tune your vehicle, this is the first step. After you place the order for the Juke Tune, you'll need to email info@2j-racing.com and provide your order number (this will be supplied to you once checkout is completed). Our E-Tuner will look at the information you provided and start the process with you. Your Juke Tune will be created using datalogs that you provide and the E-Tuner will be available to help you along the way. There will be a maximum of 3 updates to the initial tune before it's considered completed. Please allow 2-3 days for a response from the E-Tuner, he provides tunes in the order they were received. You have 1 year from the date of purchase to redeem your tune. Juke Tunes are non-transferable and non-refundable if you made contact with our E-Tuner and received any files from him. Choose $9.89 Shipping at checkout and Use Code Pickup to remove the shipping cost Learn More -
2JR Nissan Juke Engine Intercooler Hose Kit (2011-2014 and all RS years)
Regular Price: $78.77
Special Price $69.98
IN STOCK!! Now Shipping 2JR begins their worldwide release of Juke parts with their high grade hose kit for the Gen1 (2011-2014) Juke. Fits all models. Race Proven! Designed for High Temperature (330deg), High Boost Applications. Won't swell or burst under extreme conditions . 2JR Hose Kits are made with a 4 Ply Reinforced Silicone combined with Nomex-like material to provide superior heat reduction and pressure tolerance over the OEM Nissan hoses. The 2JR Kit is a direct replacement for your OEM hoses and installs with simple hand tools. Excellent way to dress up your engine bay on the Juke. Available in multiple colors. Color Choices: Outside / Inside Red / Blue Blue / Red Application: 2JR Nissan Juke Engine Hose Kit (2011-2014 and al RS years) Ships Worldwide! Learn More -
Juke FWD Downpipe Bracket
Regular Price: $32.98
Special Price $26.78
Juke FWD Downpipe Bracket Designed for your 2JR FWD downpipe (Juke) to mate up to your OEM bracket to significantly reduce exhaust movement and eliminate the tension placed on the flex joints. Learn More -
Tanabe Sustec Front Strut Tower Bar Juke (Gen 1)
Regular Price: $198.10
Special Price $188.78
Tanabe Sustec Front Strut Tower Bar Juke (Gen 1) Fits all 2011-2014 models and all RS years The Tanabe Strut Tower Bar is arguable one of the least expensive upgrades that can provide a very high degree of benefit that is felt immediately after installing. Often one of the first modifications performed on a vehicle, the strut tower brace improves handling and stability of a vehicle. The Sustec Tower Bar has been very popular due to its low price and high functionality. By connecting the strut towers, and creating a balance, the shocks are prevented from independently moving and causing small changes in suspension geometry. Learn More -
Sentra 04-06 B15 2.5L Hi-Power 3" Cold Air Intake (CAI)
Regular Price: $249.98
Special Price $199.99
This is the highest HP producing intake we've ever tested. Over 8 hp more than a Nismo Cold Air intake!!. Makes Over 15 than the stock box. Refer to the dyno for Nismo vs 2JR. Can be used for supercharged or turbo applications if the customer chooses. Has a full 3" MAF section with the appropriate MAF spacing in the piping to prevent any unwanted air disturbance which would cause MAF spikes. Nissan MAFs are require a specific amount of straight pipe before and after the MAF for optimum performance. Our intake is a full mandrel bent, completely seamless, power section cold air intake. The MAF is hidden on the backside and it has just one coupler, at the TB. It fits around your Stock battery. Can be shortened by the owner for a short ram setup. Power, design and function. And for less than any other cold air intake on the market. This is the highest HP producing intake for the Spec-V. It also sounds incredible at wide open throttle! Intake includes 1. 1 piece seamless high polished piping with integrated MAF housing / power section 2. 1 dry hi-flow filter 3. 1 coupler assy with band clamps 4. 1 VC to CAI hose 5. 1 round bushing for securing the intake (w hardware) Colors add 2-3 weeks to shipping time Learn More -
Sentra 02-03 B15 2.5L Hi-Power 3" Cold Air Intake (CAI)
Regular Price: $249.98
Special Price $199.99
This is the highest HP producing intake we've ever tested. Over 8 hp more than a Nismo Cold Air intake!!. Makes Over 15 than the stock box. Refer to the dyno for Nismo vs 2JR. Can be used for supercharged or turbo applications if the customer chooses. Has a full 3" MAF section with the appropriate MAF spacing in the piping to prevent any unwanted air disturbance which would cause MAF spikes. Nissan MAFs are require a specific amount of straight pipe before and after the MAF for optimum performance. Our intake is a full mandrel bent, completely seamless, power section cold air intake. The MAF is hidden on the backside and it has just one coupler, at the TB. It fits around your Stock battery. Can be shortened by the owner for a short ram setup. Power, design and function. And for less than any other cold air intake on the market. This is the highest HP producing intake for the Spec-V. It also sounds incredible at wide open throttle! Intake includes 1. 1 piece seamless high polished piping with integrated MAF housing / power section 2. 1 dry hi-flow filter 3. 1 coupler assy with band clamps 4. 1 VC to CAI hose 5. 1 round bushing for securing the intake (w hardware) Learn More -
B15 2.5L Hi-Power 3" Cold Air Intake (CAI)
Regular Price: $299.99
Special Price $149.00
This is the highest HP producing intake we've ever tested. Over 8 hp more than a Nismo Cold Air intake!!. Makes Over 15 than the stock box. Refer to the dyno for Nismo vs 2JR. Can be used for supercharged or turbo applications if the customer chooses. Has a full 3" MAF section with the appropriate MAF spacing in the piping to prevent any unwanted air disturbance which would cause MAF spikes. Nissan MAFs are require a specific amount of straight pipe before and after the MAF for optimum performance. Power, design and function. And for less than any other cold air intake on the market. This is the highest HP producing intake for the Spec-V. It also sounds incredible at wide open throttle! Intake includes 1. 1 piece seamless high polished piping with integrated MAF housing / power section 2. 1 dry hi-flow filter 3. 1 coupler assy with band clamps 4. 1 VC to CAI hose 5. 1 round bushing for securing the intake (w hardware) Learn More -
Nissan Juke Oil Feed Line - Turbo
Regular Price: $89.95
Special Price $68.39
Juke Oil Feed Line - (2011-2014) and all RS models (any year) Replacement Oil Feed Line for your Gen 1 Nissan Juke. Its very common for this line to become clogged over time and damage the turbo. Don't take a chance and replace it with a new line, hardware and copper seals. Install time is approx 30m and best performed during an oil change. It is also recommended to add a catch can to capture and filter the oil blow by before it enters back into your engine. Learn More -
SR/Nismo Stage I Clutch and Forged Flywheel - OEM Stock Upgrade (325hp)
Regular Price: $679.00
Special Price $629.78
Stage I Performance Carbon Ceramic Clutch and Forged Flywheel Kit SR / Nismo Sentra - All Years (MR16DDT), only Turbo Models Includes Stage 1 Clutch, Flywheel and CSC (concentric slave unit) 34% Increase in clamping force Carbon and ceramic material with a performance pressure plate provides the best streetable clutch on the market today for your Nissan. This assembly is suited for bolt on upgrades up to 325hp. It provides extended life, easy engagement and great drivability. Not stiff or harsh, feels like stock. Optional LIQUI MOLY 3L Fully Synthetic Hypoid Gear Oil (GL4/5) 75W90 Learn More -
Step Gasket (Juke)
Regular Price: $7.80
Special Price $6.85
Step Gasket (Juke) Used for the Midpipe to Downpipe connection. Also can be used where the flanges may not seal and added thickness is needed Size is for 2.5 to 2.75 flanges. Sold as EACH Learn More -
2JR UpRev Turbo/Boosted ROM Files (Non-Juke)
Regular Price: $399.98
Special Price $349.98
2JR UpRev Turbo/Boosted ROM Files (not Nissan Juke) If you already have a USB Interface cable and license, and wish to have us tune your vehicle, this is the first step. After you place the order for the E-Tune, you'll need to email info@2j-racing.com and provide your order number (this will be supplied to you once checkout is completed). Our E-Tuner will look at the information you provided and start the process with you. Your E-Tune will be created using datalogs that you provide and the E-Tuner will be available to help you along the way. There will be a maximum of 3 updates to the initial tune before it's considered completed. Please allow 2-3 days for a response from the E-Tuner, he provides tunes in the order they were received. You have 1 year from the date of purchase to redeem your tune. E-Tunes are non-transferable and non-refundable if you made contact with our E-Tuner and received any files from him. Learn More -
Clutch Masters Nissan Juke 1.6T 6 Speed FX250 Clutch Kit
Regular Price: $577.50
Special Price $498.78
Clutch Masters Nissan Juke 1.6T 6 Speed FX250 Clutch Kit The FX250 System uses the Power Plus I Pressure Plate and a hybrid combination of Clutch Masters New Formula Button on one side and a heavy-duty Steel Back Organic friction lining on the other. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and have a spirited driving style. The FX250 clutch system has a higher holding capacity than a traditional full faced Kevlar without compromising the street friendly characteristics Clutch Masters is known for *Features* * High performance street system * Holding capacity 110% over stock * Heavy-Duty reinforced pressure plate * Hi-Leverage pressure ring design * Sprung hub/cushioned disc * Steel backed organic friction material *Includes* * Pressure Plate * Clutch Disc * Throw-out Bearing (when applicable) * Pilot Bearing or Bushing (when applicable) * Alignment Tool Learn More -
Clutch Masters Nissan SR Sentra Turbo 1.6T 6 Speed FX250 Clutch Kit
Regular Price: $577.50
Special Price $498.78
Clutch Masters 11-14 Nissan Juke 1.6L FX250 Clutch Kit Organic Fiber Tough Sprung Disc The FX250 System uses the Power Plus I Pressure Plate and a hybrid combination of Clutch Masters New Formula Button on one side and a heavy-duty Steel Back Organic friction lining on the other. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and have a spirited driving style. The FX250 clutch system has a higher holding capacity than a traditional full faced Kevlar without compromising the street friendly characteristics Clutch Masters is known for *Features* * High performance street system * Holding capacity 110% over stock * Heavy-Duty reinforced pressure plate * Hi-Leverage pressure ring design * Sprung hub/cushioned disc * Steel backed organic friction material *Includes* * Pressure Plate * Clutch Disc * Throw-out Bearing (when applicable) * Pilot Bearing or Bushing (when applicable) * Alignment Tool Learn More