Search results for '2011 altima'
-
JWT QR25DE Balance Shaft Removal Kit (BSR)
Regular Price: $129.99
Special Price $109.99
Must have for any lightly modified and/or turbo QR. The Balancer Shaft Removal kit is a must for high RPM performance. The QR25DE comes equipped with a balancer shaft assembly that spins at twice engine speed to generate an opposing inertial mass. Increases oil capacity by 1.5qts Learn More -
JWT QR25 HEAVY DUTY CLUTCH SET
$326.42QR25 HEAVY DUTY CLUTCH SET WITH 50% HIGHER CLAMPING FORCE THAN STOCK AND A 10M.M. OUTSIDE DIAMETER INCREASE. YOU MUST USE THE JWT ALUMINUM FLYWHEEL WITH THIS CLUTCH. Learn More -
IN-CHASSIS VALVE SPRING COMPRESSOR fits most VQ, KA, QR, & VK engines
$92.99IN-CHASSIS VALVE SPRING COMPRESSOR fits most VQ, KA, QR, & VK engines Learn More -
QR25 JWT CAMSHAFT SET S1 BILLET CAMS
Regular Price: $699.99
Special Price $649.98
CAMSHAFT SET QR25DE BILLET CAMS. GOOD IDLE AND DRIVABILITY WITH AN 8+HP GAIN. USES STOCKS SPRING AT STOCK REV CUT OR AQR25-SPRNG SPRING SET IF RUNNING TO 7200RPM.
FITS:
S1 Cam - Excellent street cam, good power and idle. Go with the best, JWT Learn More
ALTIMA, SENTRA, ALTIMA 2002+, SENTRA 2.5L,
ENGINES:
QR25DE, -
QR25 JWT CAMSHAFT SET C1 BILLET CAMS
Regular Price: $699.98
Special Price $649.98
Ultimate in cams for your QR motor. Go big with the C1s.CAMSHAFT SET QR25DE C1 BILLET CAMS, BETTER THAN THE JWT S1 CAMS ABOVE 3500 RPM WHEN USED WITH 2J RACING LONG TUBE HEADER, 3" COLLECTOR AND LOW RESTRICTION EXHAUST SYSTEM. THERE IS ANOTHER 10-15 HP POTENTIAL BEYOND THE JWT S1 CAMS FOR A COMPETITION ENGINE. C1 IS A LARGE PROFILE
FITS: ALTIMA 2002+, SENTRA 2.5L B15 and B16,
ENGINES: QR25DE,
Suggested to use Brian Crower Valve Springs Install Instructions http://www.jimwolftechnology.com/wolfpdf/CAM_ASER2-QRNC1_HEAD_CLEARANCING_INST.pdf http://www.jimwolftechnology.com/wolfpdf/CAMSHAFT_INSTALL_QR25DE_INSTRUCTIONS.pdf Learn More -
QR25 JWT Beehive Spring
$244.48QR25DE JWT BEEHIVE SPRING FOR USE WITH JWT COMPETITION CAMSHAFTS TO .600" LIFT. MUST USE RETAINER ARETN-BHIVE ON EARLY ENGINES. 35.96mm INSTALLED HEIGHT, USE ORIGINAL SPRING BASE SHIMS. Complete set FITS: ALTIMA 2002+, SENTRA 2.5L ENGINES: QR25DE Learn More -
PRE ORDER B15 V2 Long Runner Medusa UEL Header
Through continuous testing 2JR has improved the already dominate Medusa header with performance upgrades. Port changes to Oval Head Port Matched Flanges for a perfect seal - Longer runners by 4" over the V1 Medusa produce a higher mid-high rpm HP performance. And stepped runner design from 1.7" to 1.9" from the Spyder header help improve scavenging and broaden the torque curve. The V2 Medusa is UEL (unequal length) and provides a "boxer-like" rumble at idle and under throttle. Comes with Billet Aluminum Alternator Clearance Bracket. You will need one slim fan (included) to run this header because of its size and runner design. It will bolt to the OEM midpipe or the 2JR 2.5 or 3" midpipe. You can remove the fan and ACB option and save an additional $74! Make sure you have these parts already. For a quick install - select the 2JR Plug and Play Fan Wire kit To install the fan - the factory clip has 4 wires, the top two are position (looking at where the clip is) and the bottom two are neg. Connect the blue fan wire to the top two + pos wires and the black 2J fan wire to the bottom two - wires. Fits all 02-06 Sentras and Altimas - qr25de only. Learn More