Search results for '2011 altima coupe v6'
-
S1 CAM SET FOR VQ35DE
$1,269.00JWT S1 BILLET CAMS ADD 15+HP WHILE MAINTAINING EXCELLENT DRIVABILITY AND GOOD IDLE QUALITY. EVEN MORE AWESOME WHEN COMBINED WITH A TUNED EXHAUST AND OUR POP-CHARGER INTAKE SYSTEM. Learn More -
VQ35 C-2 JWT CAMSHAFT SET
$1,386.33C-2 JWT CAMSHAFT SET VQ35 261 DEG. / .456" (11.58MM) LIFT RACE CAM SET FOR NA AND BOOSTED ENGINES. JWT Valve Springs and Shims are REQUIRED Learn More -
JWT QR25DE Balance Shaft Removal Kit (BSR)
Regular Price: $129.99
Special Price $109.99
Must have for any lightly modified and/or turbo QR. The Balancer Shaft Removal kit is a must for high RPM performance. The QR25DE comes equipped with a balancer shaft assembly that spins at twice engine speed to generate an opposing inertial mass. Increases oil capacity by 1.5qts Learn More -
JWT QR25 HEAVY DUTY CLUTCH SET
$326.42QR25 HEAVY DUTY CLUTCH SET WITH 50% HIGHER CLAMPING FORCE THAN STOCK AND A 10M.M. OUTSIDE DIAMETER INCREASE. YOU MUST USE THE JWT ALUMINUM FLYWHEEL WITH THIS CLUTCH. Learn More -
IN-CHASSIS VALVE SPRING COMPRESSOR fits most VQ, KA, QR, & VK engines
$92.99IN-CHASSIS VALVE SPRING COMPRESSOR fits most VQ, KA, QR, & VK engines Learn More -
QR25 JWT CAMSHAFT SET S1 BILLET CAMS
Regular Price: $699.99
Special Price $649.98
CAMSHAFT SET QR25DE BILLET CAMS. GOOD IDLE AND DRIVABILITY WITH AN 8+HP GAIN. USES STOCKS SPRING AT STOCK REV CUT OR AQR25-SPRNG SPRING SET IF RUNNING TO 7200RPM.
FITS:
S1 Cam - Excellent street cam, good power and idle. Go with the best, JWT Learn More
ALTIMA, SENTRA, ALTIMA 2002+, SENTRA 2.5L,
ENGINES:
QR25DE, -
QR25 JWT CAMSHAFT SET C1 BILLET CAMS
Regular Price: $699.98
Special Price $649.98
Ultimate in cams for your QR motor. Go big with the C1s.CAMSHAFT SET QR25DE C1 BILLET CAMS, BETTER THAN THE JWT S1 CAMS ABOVE 3500 RPM WHEN USED WITH 2J RACING LONG TUBE HEADER, 3" COLLECTOR AND LOW RESTRICTION EXHAUST SYSTEM. THERE IS ANOTHER 10-15 HP POTENTIAL BEYOND THE JWT S1 CAMS FOR A COMPETITION ENGINE. C1 IS A LARGE PROFILE
FITS: ALTIMA 2002+, SENTRA 2.5L B15 and B16,
ENGINES: QR25DE,
Suggested to use Brian Crower Valve Springs Install Instructions http://www.jimwolftechnology.com/wolfpdf/CAM_ASER2-QRNC1_HEAD_CLEARANCING_INST.pdf http://www.jimwolftechnology.com/wolfpdf/CAMSHAFT_INSTALL_QR25DE_INSTRUCTIONS.pdf Learn More -
QR25 JWT Beehive Spring
$244.48QR25DE JWT BEEHIVE SPRING FOR USE WITH JWT COMPETITION CAMSHAFTS TO .600" LIFT. MUST USE RETAINER ARETN-BHIVE ON EARLY ENGINES. 35.96mm INSTALLED HEIGHT, USE ORIGINAL SPRING BASE SHIMS. Complete set FITS: ALTIMA 2002+, SENTRA 2.5L ENGINES: QR25DE Learn More -
PRE ORDER B15 V2 Long Runner Medusa UEL Header
Through continuous testing 2JR has improved the already dominate Medusa header with performance upgrades. Port changes to Oval Head Port Matched Flanges for a perfect seal - Longer runners by 4" over the V1 Medusa produce a higher mid-high rpm HP performance. And stepped runner design from 1.7" to 1.9" from the Spyder header help improve scavenging and broaden the torque curve. The V2 Medusa is UEL (unequal length) and provides a "boxer-like" rumble at idle and under throttle. Comes with Billet Aluminum Alternator Clearance Bracket. You will need one slim fan (included) to run this header because of its size and runner design. It will bolt to the OEM midpipe or the 2JR 2.5 or 3" midpipe. You can remove the fan and ACB option and save an additional $74! Make sure you have these parts already. For a quick install - select the 2JR Plug and Play Fan Wire kit To install the fan - the factory clip has 4 wires, the top two are position (looking at where the clip is) and the bottom two are neg. Connect the blue fan wire to the top two + pos wires and the black 2J fan wire to the bottom two - wires. Fits all 02-06 Sentras and Altimas - qr25de only. Learn More -
MagnaFlow Cat-Back 09-17 Nissan 370Z V6 3.7L Street Series SS 2.25in Dual Split Rear Exit Exhaust
Regular Price: $1,427.00
Special Price $1,395.99
Made in the USA and engineered to last, for those seeking increased performance and better economy, MagnaFlow Street Series Performance Exhaust systems deliver the smooth deep sound you want and the wide-open performance power you need. Our exhaust systems feature straight-through flow designs for the ultimate in unrestricted horsepower and torque for big power while maintaining exhaust efficiency. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. Available with an optional High Temp Satin Black Coating providing aggressive unique style and protection. * All Mandrel Bent Tubing * 409 Stainless Steel Construction * Increased Horsepower and Torque * 1 Year Warranty on optional Black Finish, Lifetime Construction * Made in USA Learn More -
aFe Takeda Stage-2 Pro DRY S Cold Air Intake System Nissan 370Z 09-17 V6-3.7L
Regular Price: $476.10
Special Price $439.99
Takeda intakes are constructed out of lightweight black wrinkle finish aluminum tubing or clear-coat anodized polished tubing for maximum air flow and a great style. This intake uses a large 360 degree high flow Pro DRY S air filter for maximum flow, filtration and convenience. The Pro DRY S air filter requires no oils and cleans with simple soap and water. Takeda intakes come complete with all tubing, filters, couplers and hardware for an easy installation. Learn More -
aFe Takeda Intake Stage-2 Polished Pro DRY S 09-17 Nissan 370Z V6 3.7L
Regular Price: $579.60
Special Price $549.99
Takeda intakes are constructed out of lightweight black wrinkle finish aluminum tubing or clear-coat anodized polished tubing for maximum air flow and a great style. This intake uses a large 360 degree high flow Pro DRY S air filter for maximum flow, filtration and convenience. The Pro DRY S air filter requires no oils and cleans with simple soap and water. Takeda intakes come complete with all tubing, filters, couplers and hardware for an easy installation. Learn More -
Weapon R 09-10 Nissan 370Z V6 Twin Throttle Body Convertible Secret Weapon Intake Neo Titanium
Regular Price: $541.00
Special Price $519.99
The Secret Weapon Intake was designed, to increase air intake volume to the engine. The concept is to create two different air velocity profiles, one traveling at higher speeds than the other. This technology increases air volume and speed to the engine, which naturally feeds the engine 3x more air than the conventional air intake system. The intake pipe is bent out of high quality 6061 Aluminum on our Automated CNC mandrel bender. Polished to a high show quality finish. The SW1 Air filter features a tuned velocity stack to increase velocity and decrease turbulence. Only Comes In Polished. 1 Million Mile Limited Warranty Open pore high density re-usable foam Over 250 applications for Car's / Trucks / SUV's. Learn More -
Weapon R 09-15 Nissan 370Z V6 Twin Throttle Body Secret Weapon Intake
Regular Price: $487.00
Special Price $425.00
The Secret Weapon Intake was designed, to increase air intake volume to the engine. The concept is to create two different air velocity profiles, one traveling at higher speeds than the other. This technology increases air volume and speed to the engine, which naturally feeds the engine 3x more air than the conventional air intake system. The intake pipe is bent out of high quality 6061 Aluminum on our Automated CNC mandrel bender. Polished to a high show quality finish. The SW1 Air filter features a tuned velocity stack to increase velocity and decrease turbulence. Only Comes In Polished. 1 Million Mile Limited Warranty Open pore high density re-usable foam Over 250 applications for Car's / Trucks / SUV's. Learn More -
aFe Silver Bullet Throttle Body Spacer 09-18 Nissan 370Z V6-3.7L (VQ37VHR)
Regular Price: $236.25
Special Price $204.99
One of the easiest additions to improve low end horsepower and torque to your VQ37 is the Silver Bullet Throttle Body Spacers. The TBS has both a Serrated and Helix combination design, which creates air turbulence in the intake manifold, increasing the air pressure in the combustion chamber. This design also reduces intake whistle that occurs with other helix-only designs. Kit comes with two spacers to work with the VQ's dual throttle body design. Serrated/Helix Design: The Serrated/Helix design creates air turbulence in the intake manifold. This turbulence increases the air pressure in the combustion chamber resulting in increased horsepower, torque and improved throttle response. The Serrated/Helix combination design also reduces intake whistle that occurs with other helix only designs. (US PAT 07055513) 6061-T6 Billet Aluminum Construction: All Silver Bullet Throttle Body Spacers are precision machined from 6061-T6 billet aluminum for lightweight, high strength and perfect fit and finish. Installation Is A Snap: This Silver Bullet throttle body spacer uses all factory mounting locations and a gasket providing stability and a hassle-free installation. Learn More -
K&N 09-10+Nissan/Infiniti 370z/G37 V6-3.7L Typhoon Intake
Regular Price: $649.99
Special Price $629.99
The K&N 69-7078TS Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Nissan 370Z and Infiniti G37 models. The restrictive factory air filters and air intake housings are replaced by the K&N Typhoon air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intakes. More air means more usable power and acceleration throughout the engine's RPM range. The 69-7078TS air intake comes with dual black rubber topped K&N high-flow air filters and heat shields that install into the previous air box spaces. Air is directed through the intake tubes into the engine's throttle bodies for a guaranteed power gain. The intake tubes have an attractive silver powder-coated finish that's made to last and accommodate the factory mass air sensors and crank case vent hoses. The oversized cone shaped air filters can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake system is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a couple of screwdrivers, pliers, a ratchet set and several wrenches. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. Learn More -
aFe Twisted Steel Headers 03-06 Nissan 350Z /Infiniti G35 V6-3.5L
Regular Price: $1,064.98
Special Price $989.98
Features: •Constructed of 1-5/8in. 16-gauge 304 stainless steel primary tubing •Mandrel-bent for unrestricted flow •3-to-1 formed collectors decrease turbulence and increases exhaust velocity •Optimized Tube Lengths Improve Flow and Performance •100% hand TIG-welded construction ensures optimal stre ngth and durability Test Results •In testing; the headers produced a max gain of+9 horsepower and+12 ft. lbs. of torque verified by our in house dyno (tested on 2003 Nissan 350Z V6-3.5L with stock y-pipe) •Potential for up to+10 horsepower and+13 lbs. x ft. of torque when combined with aFe s per formance Y-Pipe (P/N 48-36104-YC) Factory Mounting Locations: These headers are a direct bolt-on installation which requires no cutting or drilling to provide a hassle-free installation. Formed Collectors: 3-to-1 formed collectors decrease turbulence and increases exhaust velocity. The result is in creased horsepower; torque and improved throttle response. Heavy Duty Flanges: 1-5/8in. Thick 1-piece flanges are used to prevent warpage to ensure a leak-free seal over the life of the vehicle. Optimized Tube Lengths: Tube lengths are optimized for true pulse control technology which improves flow and performance. aFe headers and exhaust are engineered and manufactured in our Corona; California manufacturing facility. Note: This system is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle. Learn More -
aFe Takeda Intakes Stage-2 PDS AIS PDS Nissan 350Z 03-06: Infiniti G35 03.5-06 V6-3.5L (blk)
Regular Price: $351.90
Special Price $319.99
Takeda intakes are constructed out of lightweight black wrinkle finish aluminum tubing or clear-coat anodized polished tubing for maximum air flow and a great style. This intake uses a large 360 degree high flow Pro DRY S air filter for maximum flow, filtration and convenience. The Pro DRY S air filter requires no oils and cleans with simple soap and water. Takeda intakes come complete with all tubing, filters, couplers and hardware for an easy installation. Learn More -
Volant 03-06 Nissan 350Z 3.5 V6 Pro5 Closed Box Air Intake System
Regular Price: $324.99
Special Price $299.99
Volant PowerCore Cool Air Intake Kit *Volant Air Filter Box:* Our Cross-Link polyethylene box is engineered to each specific application for low restriction and an increase in air volume. It insulates and protects the filter from engine heat, moisture, dust and debris to provide colder air to the engine for an increase in horsepower. *Volant Air Duct:* Factory air inlet ducts use sound baffles and awkward bends which restrict flow. Our Cross-Link polyethylene air ducts are sculptured to give the engine less restrictive breathing. Incorporating larger diameters and unique bends, that can't be duplicated with metal ducts, allow for maximum airflow velocity and throttle response. *NEW Volant Filters with PowerCore® Filtration Technology:* This air filter is the most revolutionary on the market. Manufactured by Donaldson® to Volant's applications, this filter uses advanced technology for improved efficiency. This material is a high-quality synthetic, that won't deteriorate as easily as traditional paper element and cotton/gauze filter media, while also providing vastly improved filtration up to 99.97%. In addition, it's water resistant and never needs oiling. PowerCore Filtration Technology works by directing air into the front of the filter, where it is channeled into its fluted design. The channels are alternately sealed, allowing air to enter through an open flute and forcing it to exit out an adjacent flute. This allows the air to be filtered in one pass through the filter media with less restriction, allowing clean air to enter your engine for increased airflow and higher filtration efficiency. This technology allows the filter to include a 4 year or 100,000 miles warranty when used in urban conditions. Volant offers Polished Aluminum or Carbon Fiber Look lids. (Some of our older applications and low production intake kits have the carbon fiber look lid.) *High Performance Silicon Connectors:* Our silicone hose connectors provide flexibility while maintaining strength and thermal stability. They won't crack or deform over time like rubber connectors. *Stainless Steel Clamps:* We only use marine-grade, stainless steel clamps that provide optimal performance to provide a solid seal that won't loosen or deteriorate. Learn More -
K&N 03-05 Nissan 350z V6-3.5L Performance Intake Kit
Regular Price: $429.99
Special Price $349.99
K&N Fuel Injection Performance Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K&N O/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube. Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K&N Air Filter. The weakest link in the airflow “chain” robs a vehicle of its natural horsepower. Often that weak point is the factory air path leading to the Engine. K&N Fuel Injection Performance Kits (FIPK) virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine. The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. K&N Fuel Injection Performance Kits (FIPK) are truly state-of-the-art. K&N starts with the largest conical shaped high-flow air filter that can fit into the engine compartment while using factory holes and mounting points. This extra filter size provides even more airflow at lower restriction than a standard K&N O/E replacement filter that is limited to the size of the factory air box. The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles). When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower. Next the filter is attached to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE). This process allows the tube to be precisely shaped to reduce turbulence and accelerate airflow into the engine. This is why some tubes have unique shapes that are specifically engineered for each application. Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life. Put all this together and you have the best high-flow intake system available today. FEATURES * Guaranteed to Provide more HP and Increased Acceleration * Engineered to Specific Vehicle Design * Easy to Install, Usually in 90 minutes or less! * Lasts up to 100,000 Miles Before Service is Required (depending on driving conditions) * Million Mile Limited Warranty * Replaces OEM Filter and Air Box * Air Filter is Washable and Reusable * Works with Original Equipment Manufacturer Computer Systems * Designed to use Factory Holes & Mounting Points Whenever Possible * Most are CARB Exempt and street legal in all 50 US States Learn More