Search results for '2011 NISSAN SENTRA SER SPEC V'
-
AEM 2017 Nissan Sentra Turbo SR / Nismo Gunmetal Gray Cold Air Intake
Regular Price: $399.98
Special Price $378.98
Fits all Nismo/SR Turbo Sentras AEM pioneered the Cold Air induction system for sport compact cars in 1994. A Cold Air intake system relocates the filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horesepower and torque. But that's only part of the power equation. Tuning the inlet pipe in length and diameter to match the engine's resonance helps move more air to the cylinders (think of your engine as a big air pump), and no company on the market can tune an inlet as well as we can. We also monitor fuel trim correction factors and all OBDII sensors during R&D to eliminate leaning the engine out and/or throwing a check engine light. Learn More -
2015+ Hard Intercooler Piping Kit (Gen 2 MR16) B17 Sentra Turbo/Juke
Regular Price: $329.99
Special Price $199.78
Fits all 2015 and up Nissan Jukes - EXCEPT Nismo RS and fits all B17 Sentra Turbo/Nismo/SR For the Gen2 Juke MR Engine As with all intercooler hard-pipe kits, the stock plastic pipes to and from the intercooler are replaced with solid pipes to eliminate distortion under boost. But the devil is in the details, and that is where similarities end. The 2JR V2 MR16DDT Hard-Pipe Kit consists of mandrel pipes made from aluminum tubing on both the cold side and hot side of the intercooler. The results are hard pipes from the turbo outlet to intercooler inlet and from the intercooler outlet to the throttle body, without unsightly mid-pipe silicone hose couplings that can disrupt flow or potentially blow off under boost. The hot and cold pipe diameters are increased from the stock 2.5" and 2.25", enhancing flow even further. We used custom 2.6" couplers to fit over the OEM intercooler and Throttle Body so no special attachment was required. Piping is available in polished, wrinkle red or black. Includes both Hot and Cold side piping, couplers and clamps. Hot side piping now comes with thicker flanges at the turbo and welded inside so the OEM nut fits flush and flat for a tight seal. Simple install in 1hour with hand tools. Learn More -
2007+ Sentra / Altima Medusa Header / optional Midpipe (QR25 2.5L)
Regular Price: $579.99
Special Price $429.78
2007+ Sentra / Altima Medusa Header / optional Midpipe (QR25 2.5L) Application - Header Only 2007 - 2012 2.5L Nissan Sentra 2007 - 2019 2.5L NIssan Altima (coupe and sedan) Application - Midpipe 2007 - 2012 2.5L Nissan Sentra (only) Midpipe will not fit Altima Coupe or Sedan The wait is finally over! The Medusa MB16 header is here!. Through continuous testing 2JR has improved the already dominate Medusa header with performance upgrades. Port changes to Oval Head Port Matched Flanges for a perfect seal - Longer runners by 4" over the V1 Medusa produce a higher mid-high rpm HP performance. And stepped runner design from 1.7" to 1.9" from the Spyder header help improve scavenging and broaden the torque curve. The MB16 Medusa is UEL (unequal length) and provides a "boxer-like" rumble at idle and under throttle. Slim fans and ACB ARE NOT required for fitment. Simply install and enjoy the performance and rumble from your Lt Ed MB16 Medusa. Made from 304SS Stainless. Bolts directly to your factory midpipe or step up to the 2JR 70mm Stainless Midpipe for even more power and roar! Learn More -
2JR Juke Remote UpRev Tuning - includes standard cable, license and 2JR Tune
Regular Price: $850.99
Special Price $799.78
For V1 Motors and all RS models ONLY (2011-2014 all models, and RS all years) Will not work on V2 Juke Motors - 2015 and Up (except RS) Allow 2JR to remotely tune your Nissan Juke via UpRev. 2JR provides the license, cable and software links - and works their tuning expertise to dial in your Juke based on your mods and driving style (street / autox / track). 2JR will walk you through the process of simply datalogging the ECU during driving and we will review your data and provide a tune back to you. Typically 6-8 datalogging sessions are required to dial it in to 2JR's high tuning standards. This can take up to two weeks of working with you - so certainly your patience is always appreciated through this process. FYI - your UpRev license can always be flashed back to the cable and the cable sold in the future should you sell your vehicle / part out. This can also be done if you are going in for warranty work. 2JR can provide you with the back to stock rom in these situations at no charge. Learn More -
Nissan Juke AWD Midpipe
Regular Price: $319.99
Special Price $239.78
Nissan Juke AWD Midpipe (fits all years) Application: Nissan Juke CVT All Wheel Drive (AWD) Years: 2011 to 2017 Material: Stainless Steel / Polished Size: 70mm AWD: No Defouler Needed The 2JR midpipe replaces the restrictive factory midpipe and catalytic converter with a larger, 70mm stainless steel mandrel-bent system, featuring a stock flange that bolts to the factory catback or aftermarket/2JR catback. Expect better throttle response, more horsepower (+12whp dyno proven w/o a tune) and an intoxicating exhaust note, while remaining civilized during normal daily driving. It’s one of the best performance upgrade for the Juke. NOTE: to fit with AWD Stillen catback you must run a flat 2 bolt flange at the front of the Stillen catback Learn More -
High Performance Juke Stainless Brake Line Set
Regular Price: $142.99
Special Price $109.98
2JR Nissan Juke Stainless Steel brake lines provide a quicker, firmer, more consistent pedal response by reducing system compliance and maintaining consistent brake pressure. Our Brake lines consist of a PTFE inner line that carries the brake fluid, which is then covered with a layer of woven stainless steel braid. The stainless braided hose is also coated with a smoked abrasion resistant PVC cover for maximum protection against chaffing.All fittings are engineered for proper fit and durability. All necessary brackets and fasteners are included with each line kit.
Sold as a full kit. Front and Rear. Production time is approx 3 weeks.
Add 2 Bottles of Motul 5.1 Brake Fluid for $19.99
100% synthetic brake fluid on polyglycol basis for all types of hydraulic actuated brake and clutch systems in accordance with DOT 5.1, DOT 4 and DOT 3 manufacturers' recommendations. Specially designed for anti-locking brake systems (ABS). 100% synthetic. Dry boiling point: 272C / 522F. Wet boiling point: 185C / 365F. Standards:
Learn More -
Nissan Juke AEM Cold Air Intake (11-14)
Regular Price: $399.98
Special Price $389.00
Nissan Juke AEM Cold Air Intake Fits 2011-2014 (and all Nismo RS) Our Cold Air systems are dyno-proven and tested against the competition to create more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. Piping Color - Gunmetal Part: aem21-734C Learn More -
Nissan Juke Turbosmart Kompact Series Plumb Back BOV
Regular Price: $166.04
Special Price $159.99
Nissan Juke Turbosmart Kompact Series Plumb Back BOV 2011-2014 and Nismo RS (all years) The Kompact Series BOVs have been designed as a bolt-on replacement for the Nissan Juke - all years, the Kompact Series products offer superior flow, full adjustability and greater structural integrity under boost. Ideal for cars with constrained engine bay access *DESCRIPTION:* Fully recirculating BOV. The Plumb Back systems vents all excess pressure back into the intake system. Great for enthusiast not wanting to be noticed. Learn More -
Sentra Spec-V 1-Step Colder Performance NGK Laser Iridium IX Spark Plugs (02-06) - Full Set
Regular Price: $36.72
Special Price $33.99
For the 02-06 Spec-V - 1 step colder iridium laser IX plug set! Includes ALL 4! NGK's IX Iridium Series Plugs were Designed Specifically for the Performance Enthusiast. Fine Wire Center Electrode Ensures High Durability and a Consistently Stable Spark Iridium Alloy has an Extremely High Melting Point, Perfect for Today's High-Tech, High Performance Engines Trivalent Metal Plating Provides Superior Anti-Corrosion and Anti-Seizing Properties Corrugated Ribs Prevent Flashover Pure Alumina Silicate Ceramic Insulator, Provides Superior Strength and Better Heat Transfer Copper Core Aids in Heat Removal Triple Seals Prevent Leakage Learn More -
Sentra Spec-V 1-Step Colder Performance NGK Laser Iridium IX Spark Plugs (02-06) - Full Set
Regular Price: $36.72
Special Price $34.00
For the 02-06 Spec-V - 1 step colder iridium laser IX plug set! Includes ALL 4! NGK's IX Iridium Series Plugs were Designed Specifically for the Performance Enthusiast. Fine Wire Center Electrode Ensures High Durability and a Consistently Stable Spark Iridium Alloy has an Extremely High Melting Point, Perfect for Today's High-Tech, High Performance Engines Trivalent Metal Plating Provides Superior Anti-Corrosion and Anti-Seizing Properties Corrugated Ribs Prevent Flashover Pure Alumina Silicate Ceramic Insulator, Provides Superior Strength and Better Heat Transfer Copper Core Aids in Heat Removal Triple Seals Prevent Leakage Learn More -
Sentra QG18DE Silicone Radiator & Heater Complete Hose Kit
Regular Price: $99.99
Special Price $69.99
Upgrade your hoses to 2JR's 4 ply silicone full race hose kit for the QG18DE engine (02-06 Sentra SE-R and Spec-V). These are the best hoses on the market with double layer webbing on the inside for long life and durability. Only in gunmetal because it looks damn good. IN STOCK! FULL HOSE KIT!! You can use your stock hose clamps or add new worm clamps to the order. Learn More -
Hawk Sentra Spec V w/ Brembo HPS Street Front Brake Pads
Regular Price: $165.89
Special Price $120.99
When it comes to performance braking, there is no competition. This unique Ferro-Carbon compound combines the safety and quality of Aerospace design partnered with the braking technology of motorsports. Much improved braking over OE and standard replacement brake pads. Recommended for import & domestic automobiles. * Increased Stopping Power * High Friction/Torque Hot or Cold * Gentle on Rotors * Extended Pad Life * Low Dust * Virtually Noise-Free Learn More -
Hawk Sentra Spec-V w/ Brembo Performance Ceramic Street Front Brake Pads
Regular Price: $183.89
Special Price $148.18
Specifically for Brembo equipped Spec-Vs! Front pad set - Performance Ceramic is engineered to reduce brake NVH (Noise, Vibration and Harshness) creating a quieter performing brake pad. Furthermore, the ceramic brake pad formula has a linear friction profile that allows your ABS brake system to work more effectively. With Performance Ceramic you can expect reduced brake pad wear, lower dust output levels and a rotor-friendly brake pad. * Increased Stopping Power * Increased Rotor Life * Extended Pad Life * Ultra-Low Dust * Extremely Quiet * Stable Friction Output Learn More -
B16 (07-09) Injen Sentra SER V-Spec 2.5L 4 Cyl. Cold Air Intake (Manual Only)
Regular Price: $382.97
Special Price $298.37
Injen Air Intake - SP Series Intake System: The Injen SP Series Intake Systems Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. The Injen SP Series Intake System does not limit itself to just a Cold Air System or Short Ram System. The MR Technology process has its effects on both types. The Injen SP Series Intake is The World's First Tuned Intake System Manual Only Learn More -
2JR Sentra QR25DE (02-06) Radiator and Heater Silicone Hose Kit
Regular Price: $99.99
Special Price $79.99
Upgrade your hoses to 2JR's 4 ply silicone full race hose kit for the QR25 engine (02-06 Sentra SE-R and Spec-V). These are the best hoses on the market with double layer webbing on the inside for long life and durability. Comes as a complete set of 4 hoses. 2 for the rad and two for the heater hoses. New for 2021, we made the upper hose 1" longer for those with 2JR rad brackets - as it moves the rad away from the header/engine You can use your stock hose clamps or add new worm clamps to the order. Learn More -
Nissan Sentra Lightweight Pulley (B17) - Fits Sentra Turbo / Nismo
Regular Price: $134.99
Special Price $98.78
For all B17 Sentra models - 1.8L and 1.6L Turbo!. From 2013 and up. 2JR introduces a lightweight solid billet 6061 racing pulley that weighs over 80% less than the stock pulley at just 15 ounces! Which translates into less rotational mass and quicker revving. All pulleys are anodized, balanced and DOES NOT require a belt change. This is a simple bolt on for more power in less than 30mins. Includes 2JR engraved logo. Incredible results with a simple pulley install - we love it on ours! Fits all B17 Models - including the SR Turbo and Nismo! Learn More -
Sentra Spec-V Pulley Combo Set! Includes Long Belt - Crank and PS (02-06 QR25s)
Regular Price: $199.99
Special Price $159.98
Full Combo Kit! Includes Crank Pulley, PS Pulley and long belt.
Nets 5whp/5wtq! 2JR introduces a lightweight solid billet 6061 racing pulley that weighs 80% less than the stock pulley (5.1 lbs vs 1lb 2JR), which translates into less rotational mass and quicker revving. This is a simple bolt on for more power in less than 30mins. Fits all 2.5L Sentra B15sr
Does not fit B16s - as they have electric power steering INCLUDES NEW LONG BELT! Learn More -
Tein 02-06 Nissan Sentra Street Basis Z Coilovers B15 (all models)
Regular Price: $817.00
Special Price $798.89
TEIN Dampers - Street Basis Z - for all B15 models 1.8L and 2.5L : TEIN Street Basis Damper is the evolution of the popular BASIC coilover model. It incorporates new internal and external components, newly developed coatings and new manufacturing processes.
TEIN engineers have spent many hours developing new seals and internal components to improve durability and product life. This was one of our major goals for the new model.
Newly developed “ZT” coating for improved durability and hassle-free ride height adjustment. TEIN developed this coating in-house after stringent test and analysis procedures. Our engineers tested different coats, application methods, cleaning processes, etc… in our own brine salt water testing machine which simulates heavy solvents/ road salts used in cold weather climates.
Slip-fit threaded adjustment tube. Allows for damper body and threaded sleeve to be thoroughly coated for rust/ corrosion protection.
The slip-fit allows a more thorough coating on the threaded section as well as powder coated damper body.
Revised Aluminum Spring Seat and Delrin Thrust Washer are light weight and durable. This combination allows for smooth ride height adjustment. The new spring seats have a larger contact surface area and eliminate the need for a rubber spring seat.
Learn More -
Mishimoto 00-06 Nissan Sentra SE-R Vspec Aluminum Fan Shroud Kit
Regular Price: $242.92
Special Price $215.95
Mishimoto Radiator Fan Shroud: Mishimoto has developed a new line of performance aluminum fan shroud kits. The Mishimoto fan shroud kits are a direct OEM fit and include Mishimoto slim electric fans. All Mishimoto aluminum fan shrouds are significantly lighter and more durable than standard OEM shrouds. They will notably improve engine cooling performance by delivering more air to the radiator and driving out excess heat. Importantly, Mishimoto fans shroud kits will safely secure the fan blades from potentially damaging other vital engine components.
Optional 2JR plug and play wiring kit. Goes from your OEM B15 harness to the Mishi Fan - makes for a quick/painless install. No cutting required! Learn More -
2JR 04-06 Sentra UpRev CanBus Wiring Kit (Required)
$6.99Can High and Can Low wires required for flashing your 04-06 Sentra Spec-V with UpRev. Comes with instructions, plugs into your OBDII port and uses the supplied 3M scotch locks to connect to the back of your gauge cluster. Simple plug and play! CanWire Instructions (2004-2006 ONLY) https://onedrive.live.com/?authkey=%21AFwLvwJwhLTTRoA&cid=522D7D76DE502434&id=522D7D76DE502434%215273&parId=root&o=OneUp Learn More