Search results for 'bolt'
-
2JR Billet 5-Lug Brake Hat / Wilwood
Regular Price: $139.99
Special Price $69.99
2JR milled from billet aluminum brake hats for the Wilwood 12.2" 4 piston and 6 piston brake kits (B15 Sentra ONLY). Finally you can get your super light Wilwood B15 kits with double drilled hats - both 4x114.3 and 5x114.3. Perfect choice for those who are 5 lug or are going 5 lug in the future. All 2JR Rear Big Brake Kits come in the double bolt pattern. In Stock! SOLD AS EACH Learn More -
2JR B17 SR Turbo / Nismo 304 Stainless Catback - Carbon
Regular Price: $699.00
Special Price $589.78
2JR B17 SR Turbo / Nismo 304 Stainless Catback - Carbon Looking for the best sound, performance and quality for your 2017-2019 Nismo Sentra SR and Nismo (1.6L Turbo)? Look no further than our hand-tig welded 2.5" stainless catback with 3.5" Carbon/Blue tip. Includes a long front resonator to remove the rasp and produce that deep, clean sound you've been searching for. It also comes with 3 hard hangers for the tail section, stainless hardware and gaskets for a complete bolt-on system. Remember, the factory turbo exhaust is a mere 49mm - and highly restrictive under boost. Unlock your car's potential with 2JR! Sound Clip Learn More -
Nissan Juke AWD Midpipe
Regular Price: $319.99
Special Price $239.78
Nissan Juke AWD Midpipe (fits all years) Application: Nissan Juke CVT All Wheel Drive (AWD) Years: 2011 to 2017 Material: Stainless Steel / Polished Size: 70mm AWD: No Defouler Needed The 2JR midpipe replaces the restrictive factory midpipe and catalytic converter with a larger, 70mm stainless steel mandrel-bent system, featuring a stock flange that bolts to the factory catback or aftermarket/2JR catback. Expect better throttle response, more horsepower (+12whp dyno proven w/o a tune) and an intoxicating exhaust note, while remaining civilized during normal daily driving. It’s one of the best performance upgrade for the Juke. NOTE: to fit with AWD Stillen catback you must run a flat 2 bolt flange at the front of the Stillen catback Learn More -
Ford Fiesta ST Intercooler Pipe Kit - Polished or Wrinkle Black
Regular Price: $415.00
Special Price $329.99
Increase the airflow to your 1.6L EcoBoost with Mishimoto intercooler piping for the 2014+ Ford Fiesta ST. The stock Fiesta ST intercooler piping is riddled with restrictive bends and small diameter sections that impede airflow. These Mishimoto intercooler pipes have a 2.5" diameter and are mandrel-bent to eliminate any restrictions. When you're turning up the boost on your hot hatch, Mishimoto's Fiesta ST intercooler piping will have no problem supporting the power you throw at them. The Mishimoto Fiesta ST cold-side intercooler pipe features a CNC-machined sensor flange for the stock pressure sensor, a port for meth injection or a boost gauge, and a silicone hose and CNC plug to allow deletion of the stock sound symposer system. Mishimoto's Fiesta ST intercooler piping features durable silicone couplers and stainless steel T-bolt clamps for reliable holding power when you're hitting full boost on a long straight. Installation requires no modifications to the engine bay, as these Fiesta ST intercooler pipes are a direct fit and work with both the stock and the Mishimoto Fiesta ST intercooler. Mishimoto Fiesta ST intercooler piping is available in either a polished or wrinkle black finish, and, like all of our Fiesta ST performance parts, includes the Mishimoto Lifetime Warranty. Learn More -
Ford Fiesta ST Oil Cooler Kit
Regular Price: $635.00
Special Price $519.00
Turbocharged, high stress 4 cylinder engines like the 1.6L EcoBoost engine in the Fiesta ST can overheat their oil very quickly within a few laps on the track or aggressive street driving. Even with the stock liquid-to- liquid heat exchanger, the engine can still run very hot and run the risk of overheating the engine's coolant as well. Aggressive tunes and some track miles can significantly overheat your oil and wear down your engine. Leave it to Mishimoto to come up with an oil cooling solution for your Fiesta ST! Mishimoto engineers started with a large 19-row oil cooler and mounted it in the front of the vehicle where it receives the most airflow. The oil cooler was designed to bypass the stock liquid to liquid oil cooler in order to get the best possible oil temperature reduction. A new CNC center bolt and aluminum coolant bypass tube are provided to easily eliminate the stock oil cooler unit. Application specific braided stainless steel lines transfer oil from the cooler to the engine and feature -10AN fittings for an easy installation. Mishimoto engineers saw consistent temperature decreases of over 35 F (19.5 C) using our non-thermostatic sandwich plate. Proving that this oil cooler kit can withstand the stresses of the most extreme applications. This oil cooler kit is available with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty. Learn More -
2JR Sentra Turbo SR / Nismo 70mm Midpipe (20wtq / 15whp)
Regular Price: $299.99
Special Price $269.78
2JR introduces their 70mm Full 304 Stainless Steel Midpipe for the Sentra SR Turbo and Nismo editions. Gains over 20wtq and 15whp without a tune!! Made from 4mm thick 304 Stainless Steel for long life, corrosion resistance and strength in the harshest environment. Direct bolt on with no modification required. And no check engine light because an 02 Spacer is built in to the midpipe! Removes the second cat in the midpipe - the primary cat remains in the downpipe. No smell, no noise - and over 20wtq!! Fits all B17 Turbo Sentras Learn More -
2JR Fiesta ST Ultra-Quiet 3" Side Exit
Regular Price: $679.00
Special Price $569.78
2JR does it once again with their custom built side exit for the Fiesta ST. We've built this exhaust for the best performance, sound and weight savings possible over any exhaust on the market. Made from 4mm thick 304 Stainless Steel for long life, corrosion resistance and strength in the harshest track environment. Next we've added steel encased rubber hangers that bolt to the chassis at stock location points for a perfectly tight fit centered on the sill opening - this allows for no burning of the sill. Then we use an oval stainless tail section for ground clearance over the pinch weld. For the keeping this completely street legal for sound, 2JR uses a large free flowing stainless resonator to designed to keep the exhaust tone completely tame (even with a catless downpipe) while keeping backpressure at an absolute minimum. Lastly - and most importantly, is the weight savings. Lighter than any other widely used system on the market with approx. 35% less piping and weight. Will bolt to the stock downpipe or the 2JR downpipe (or any other aftermarket production downpipe). NOTE: you will need to trim the pinch weld in a 4" section using a die grinder or similar. Then you will need to trim the plastic surround inside the sill where the factory cutout is located. This can be done with a dremel. Both are quite easy to do. SOUND CLIP: https://www.facebook.com/2JRacing-206550699368164/ SEE BOTTOM OF PAGE FOR INSTALL INSTRUCTIONS Learn More -
B15 3" V3 High Power Side Exit
Regular Price: $499.99
Special Price $398.78
3" V3 High Power Side Exit - More HP! B15 3" V3 High Power Side Exit with even more HP gains than our V1 or V2. Quieter than before with amazing sound, with twin resonators - similar to a V6. This is the highest HP exhaust for the QR25. Straight off our championship winning B15 and 50% lighter than stock with direct, bolt on fitment with two-position hangers for stealth or open look. You wont ever be mistaken for a Honda. Let your QR25 sound like it was supposed to with a rumble that gets noticed. Bolts to any midpipe in the factory location. Version 3: Twin Resonators - Both Pipes have Resonators 40% lighter than stock Add the 2JR 3" Resonated Midpipe for even deeper, 8db quieter sound NOTE: Version 3.5 - piping is NON-POLISHED STAINLESS STEEL Learn More -
Nissan Juke Turbosmart Kompact Series Plumb Back BOV
Regular Price: $166.04
Special Price $159.99
Nissan Juke Turbosmart Kompact Series Plumb Back BOV 2011-2014 and Nismo RS (all years) The Kompact Series BOVs have been designed as a bolt-on replacement for the Nissan Juke - all years, the Kompact Series products offer superior flow, full adjustability and greater structural integrity under boost. Ideal for cars with constrained engine bay access *DESCRIPTION:* Fully recirculating BOV. The Plumb Back systems vents all excess pressure back into the intake system. Great for enthusiast not wanting to be noticed. Learn More -
Injen 11-14 Nissan Juke 1.6L Turbo 4 cyl (incl Nismo) Upper Intercooler Pipe Kit
Regular Price: $489.67
Special Price $469.78
Intercooler Piping Kit; Upper IC Piping; Incl Machined BOV Flange & Sensor Flange; Incl Clamps & Silicone Hoses Color - Polished or Black Injen Intercooler Piping Kits are the new standard on high performance turbocharged vehicles. Utilizing T6 60601 Aluminum you can be sure your turbocharged motor will be breathing the coolest and most consistent air. Bolt on kits include all necessary hoses and couples for easy installation! Learn More -
Limited Ed - B15 Stainless Twin Resonated 2.5" V3 Side Exit
Regular Price: $489.00
Special Price $369.99
Version 3 of our side exit. Quieter than before with amazing sound - similar to a V6. Straight off our championship winning B15 and 50% lighter than stock with direct, bolt on fitment with two-position hangers for stealth or open look. You wont ever be mistaken for a Honda. Let your QR25 sound like it was supposed to with a rumble that gets noticed. Add optional 2.5" Resonated 2JR Flex Midpipe Version 3 - 2.5" stainless with 1/2" thick stainless flanges Twin Resonators (not shown) 50% lighter than stock Learn More -
SPC Performance EZ Camber XR Bolts - Pair (B15)
Regular Price: $39.99
Special Price $19.99
SPC Performance EZ Cam XR Bolts (Pair) (Replaces 12mm Bolts) EZ Cam XRs are designed for non-slotted struts. They allow both positive and negative camber changes up to approximately 1.75° (depending on vehicle) by replacing the upper O.E. strut/spindle bolt. This easy to use adjuster provides built-in adjustment over the life of a vehicle just by rotating the head of the bolt. *Each EZ Cams each kit contains TWO pieces.* Range ±1.75deg Cam Learn More -
OEM B15 Crossmember Bolt Set
Regular Price: $32.94
Special Price $24.99
Nissan OEM Front and Rear Crossmember bolt set. Replace your rusted bolts with new zinc plated bolts from Nissan. 2JR Delrin Crossmember Wheel Hop Aid Bushings can be added as well to the order. NOTE: Long Bolts are for the REAR crossmember. Larger Lip Delrin Crossmember Bushings are for the Rear Short Bolts are for the FRONT crossmember. Smaller Lip Delrin Crossmember Bushings are for the Front The Flat Delrin Washers go between the crossmember and the chassis. The Lip Bushing goes on the bolt with the lip facing upwards - into the crossmember Choose 9.89 Shipping Learn More -
Whiteline Front Sway Bar End Links with Hard Race Bushings
Regular Price: $63.99
Special Price $52.98
Direct Fit - Front Sway Bar End Links with Hard Race Bushings Whiteline Sway Bar Links are adjustable for length via center alloy turnbuckle, suit 10mm ID through-bolt. Kits contains 2x complete link assemblies with dust boots Learn More -
Focus ST - Cobb SS 3" Catback Exhaust
Regular Price: $938.38
Special Price $850.00
Focus ST - Cobb SS 3" Catback Exhaust The COBB Tuning Catback Exhaust is heralded often for its quality, performance, and subtlety. Engineered to be a vehicle specific unit, the COBB Tuning Catback Exhaust uses the highest quality stainless piping and a muffler designed for direct and efficient flow of exhaust to achieve the highest performance while still retaining a stock like appearance and sound level. The COBB Tuning Catback Exhaust does not deviate from the factory emissions equipment and conforms to the SAE dictated 95-decibel exhaust noise level limit enforced by California, as well as other states in the US. This system is modeled after the stock exhaust fitment locations, therefore making it an easy direct bolt on item inclusive of all needed gaskets and hardware. Learn More -
Focus ST - MagnaFlow Dual Center Rear Exit Stainless Cat Back Exhaust
Regular Price: $719.43
Special Price $625.99
Focus ST - MagnaFlow Dual Center Rear Exit Stainless Cat Back Exhaust 2.5" Whether you drive a street, off-road or diesel truck/SUV, MagnaFlow has DYNO-PROVEN exhaust systems that are rugged enough to survive grueling Baja racing. Each system is designed to bolt right on and provide years of trouble-free performance. Provides a smooth, deep tone that is suitable for grocery-getting SUV's with casual tow duties to full blown modded drag racing diesel pickups. * Delivers a Smooth, Deep Tone * 100% Stainless Steel * Fully Polished Mufflers * Dyno Proven * Lifetime Warranty Learn More -
SPC Performance EZ Camber XR Bolts - Pair (B15)
Regular Price: $39.99
Special Price $24.99
SPC Performance EZ Cam XR Bolts (Pair) (Replaces 12mm Bolts) EZ Cam XRs are designed for non-slotted struts. They allow both positive and negative camber changes up to approximately 1.75° (depending on vehicle) by replacing the upper O.E. strut/spindle bolt. This easy to use adjuster provides built-in adjustment over the life of a vehicle just by rotating the head of the bolt. *Each EZ Cams each kit contains TWO pieces.* Range ±1.75deg Cam Learn More -
Magnaflow 2002-2006 Nissan Sentra SE-R Spec V Stainless Steel Cat-Back
Regular Price: $730.00
Special Price $709.78
Deep tone, stainless steel - excellent SpecV exhaust! Description: Sys C/B 02-03 Nissan Sentra Se-R 2. Main Piping Diameter: 2.25 Material: Stainless Sound Level: Moderate Exit Location: Single Straight Passenger Side Rear Exit Quantity: Single * Delivers a Smooth, Deep Tone * 100% Stainless Steel * Fully Polished Mufflers * Dyno Proven * Lifetime Warranty Learn More -
Fiesta ST - Turbosmart Internal Wastegate Actuator
Regular Price: $153.99
Special Price $119.99
Turbosmart Wastegates - Internal Wastegate Actuator: Designed like any Turbosmart product, with the highest of quality and precision, the Internal Wastegate Actuators (IWG) provide better turbo response and greater sensitivity when managing boost pressures. Each IWG is adjustable with several spring options and packaged in a kit form so they can be fitted as a direct bolt-on replacement for the factory part. It canʼt get any easier! *Features:* * Silicone diaphragm with Nomex reinforcement to withstand high temperatures. * High grade, billet aluminum construction * Stainless steel rods and connecting clevis for corrosion resistance. * Locking Collar design cap allows for quick spring changes. * Range of springs from 3 to 26 psi base pressure Learn More -
MagnaFlow Exhaust - Stainless Series
$829.99MagnaFlow Exhaust - Stainless Series: Whether you drive a street, off-road or diesel truck/SUV, MagnaFlow has DYNO-PROVEN exhaust systems that are rugged enough to survive grueling Baja racing. Each system is designed to bolt right on and provide years of trouble-free performance. Provides a smooth, deep tone that is suitable for grocery-getting SUV's with casual tow duties to full blown modded drag racing diesel pickups. * Delivers a Smooth, Deep Tone * 100% Stainless Steel * Fully Polished Mufflers * Dyno Proven * Lifetime Warranty 2.25" Learn More